mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-24 12:03:39 +00:00
35b65dd8ef
Historically, the reset_cpu() function had an `addr` parameter which was
meant to pass in an address of the reset vector location, where the CPU
should reset to. This feature is no longer used anywhere in U-Boot as
all reset_cpu() implementations now ignore the passed value. Generic
code has been added which always calls reset_cpu() with `0` which means
this feature can no longer be used easily anyway.
Over time, many implementations seem to have "misunderstood" the
existence of this parameter as a way to customize/parameterize the reset
(e.g. COLD vs WARM resets). As this is not properly supported, the
code will almost always not do what it is intended to (because all
call-sites just call reset_cpu() with 0).
To avoid confusion and to clean up the codebase from unused left-overs
of the past, remove the `addr` parameter entirely. Code which intends
to support different kinds of resets should be rewritten as a sysreset
driver instead.
This transformation was done with the following coccinelle patch:
@@
expression argvalue;
@@
- reset_cpu(argvalue)
+ reset_cpu()
@@
identifier argname;
type argtype;
@@
- reset_cpu(argtype argname)
+ reset_cpu(void)
{ ... }
Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
137 lines
2.7 KiB
C
137 lines
2.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2020 - Cortina Access Inc.
|
|
*
|
|
*/
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <malloc.h>
|
|
#include <errno.h>
|
|
#include <netdev.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/compiler.h>
|
|
#include <configs/presidio_asic.h>
|
|
#include <linux/psci.h>
|
|
#include <asm/psci.h>
|
|
#include <cpu_func.h>
|
|
#include <asm/armv8/mmu.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define CA_PERIPH_BASE 0xE0000000UL
|
|
#define CA_PERIPH_SIZE 0x20000000UL
|
|
#define CA_GLOBAL_BASE 0xf4320000
|
|
#define CA_GLOBAL_JTAG_ID 0xf4320000
|
|
#define CA_GLOBAL_BLOCK_RESET 0xf4320004
|
|
#define CA_GLOBAL_BLOCK_RESET_RESET_DMA BIT(16)
|
|
#define CA_DMA_SEC_SSP_BAUDRATE_CTRL 0xf7001b94
|
|
#define CA_DMA_SEC_SSP_ID 0xf7001b80
|
|
|
|
int print_cpuinfo(void)
|
|
{
|
|
printf("CPU: Cortina Presidio G3\n");
|
|
return 0;
|
|
}
|
|
|
|
static struct mm_region presidio_mem_map[] = {
|
|
{
|
|
.virt = DDR_BASE,
|
|
.phys = DDR_BASE,
|
|
.size = PHYS_SDRAM_1_SIZE,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_OUTER_SHARE
|
|
},
|
|
{
|
|
.virt = CA_PERIPH_BASE,
|
|
.phys = CA_PERIPH_BASE,
|
|
.size = CA_PERIPH_SIZE,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE
|
|
},
|
|
{
|
|
/* List terminator */
|
|
0,
|
|
}
|
|
};
|
|
|
|
struct mm_region *mem_map = presidio_mem_map;
|
|
|
|
static noinline int invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1,
|
|
u64 arg2)
|
|
{
|
|
asm volatile("mov x0, %0\n"
|
|
"mov x1, %1\n"
|
|
"mov x2, %2\n"
|
|
"mov x3, %3\n"
|
|
"smc #0\n"
|
|
: "+r" (function_id)
|
|
: "r" (arg0), "r" (arg1), "r" (arg2)
|
|
);
|
|
|
|
return function_id;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
dcache_disable();
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
unsigned int reg_data, jtag_id;
|
|
|
|
/* Enable timer */
|
|
writel(1, CONFIG_SYS_TIMER_BASE);
|
|
|
|
/* Enable snoop in CCI400 slave port#4 */
|
|
writel(3, 0xF5595000);
|
|
|
|
jtag_id = readl(CA_GLOBAL_JTAG_ID);
|
|
|
|
/* If this is HGU variant then do not use
|
|
* the Saturn daughter card ref. clk
|
|
*/
|
|
if (jtag_id == 0x1010D8F3) {
|
|
reg_data = readl(0xF3100064);
|
|
/* change multifunc. REF CLK pin to
|
|
* a simple GPIO pin
|
|
*/
|
|
reg_data |= (1 << 1);
|
|
writel(reg_data, 0xf3100064);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
unsigned int ddr_size;
|
|
|
|
ddr_size = readl(0x111100c);
|
|
gd->ram_size = ddr_size * 0x100000;
|
|
return 0;
|
|
}
|
|
|
|
void reset_cpu(void)
|
|
{
|
|
invoke_psci_fn_smc(PSCI_0_2_FN_SYSTEM_RESET, 0, 0, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_LAST_STAGE_INIT
|
|
int last_stage_init(void)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(CA_GLOBAL_BLOCK_RESET);
|
|
val &= ~CA_GLOBAL_BLOCK_RESET_RESET_DMA;
|
|
writel(val, CA_GLOBAL_BLOCK_RESET);
|
|
|
|
/* reduce output pclk ~3.7Hz to save power consumption */
|
|
writel(0x000000FF, CA_DMA_SEC_SSP_BAUDRATE_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|