mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 01:19:49 +00:00
189ec2fee6
Device tree alignment with Linux kernel v5.18-rc2: - ARM: dts: stm32: Add support for the emtrion emSBC-Argon (only the pincontrol part) - ARM: dts: stm32: Drop duplicate status okay from DHCOM gpioc node - ARM: dts: stm32: add st,stm32-sdmmc2 compatible on stm32mp151 - ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15 - ARM: dts: stm32: use exti 19 as main interrupt to support RTC wakeup on stm32mp157 - ARM: dts: stm32: add DMA configuration to UART nodes on stm32mp151 - ARM: dts: stm32: keep uart4 behavior on * - ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp15 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
526 lines
11 KiB
Text
526 lines
11 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
|
/*
|
|
* Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include "stm32mp15-pinctrl.dtsi"
|
|
#include "stm32mp15xxaa-pinctrl.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/mfd/st,stpmic1.h>
|
|
|
|
/ {
|
|
aliases {
|
|
ethernet0 = ðernet0;
|
|
ethernet1 = &ksz8851;
|
|
rtc0 = &hwrtc;
|
|
rtc1 = &rtc;
|
|
};
|
|
|
|
memory@c0000000 {
|
|
device_type = "memory";
|
|
reg = <0xC0000000 0x40000000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
mcuram2: mcuram2@10000000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x10000000 0x40000>;
|
|
no-map;
|
|
};
|
|
|
|
vdev0vring0: vdev0vring0@10040000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x10040000 0x1000>;
|
|
no-map;
|
|
};
|
|
|
|
vdev0vring1: vdev0vring1@10041000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x10041000 0x1000>;
|
|
no-map;
|
|
};
|
|
|
|
vdev0buffer: vdev0buffer@10042000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x10042000 0x4000>;
|
|
no-map;
|
|
};
|
|
|
|
mcuram: mcuram@30000000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x30000000 0x40000>;
|
|
no-map;
|
|
};
|
|
|
|
retram: retram@38000000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x38000000 0x10000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
ethernet_vio: vioregulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vio";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vdd>;
|
|
};
|
|
};
|
|
|
|
&adc {
|
|
vdd-supply = <&vdd>;
|
|
vdda-supply = <&vdda>;
|
|
vref-supply = <&vdda>;
|
|
status = "okay";
|
|
|
|
adc1: adc@0 {
|
|
st,min-sample-time-nsecs = <5000>;
|
|
st,adc-channels = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
adc2: adc@100 {
|
|
st,adc-channels = <1>;
|
|
st,min-sample-time-nsecs = <5000>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&crc1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dac {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
|
|
vref-supply = <&vdda>;
|
|
status = "okay";
|
|
|
|
dac1: dac@1 {
|
|
status = "okay";
|
|
};
|
|
dac2: dac@2 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&dts {
|
|
status = "okay";
|
|
};
|
|
|
|
ðernet0 {
|
|
status = "okay";
|
|
pinctrl-0 = <ðernet0_rmii_pins_a>;
|
|
pinctrl-1 = <ðernet0_rmii_sleep_pins_a>;
|
|
pinctrl-names = "default", "sleep";
|
|
phy-mode = "rmii";
|
|
max-speed = <100>;
|
|
phy-handle = <&phy0>;
|
|
st,eth-ref-clk-sel;
|
|
|
|
mdio0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dwmac-mdio";
|
|
|
|
phy0: ethernet-phy@1 {
|
|
reg = <1>;
|
|
/* LAN8710Ai */
|
|
compatible = "ethernet-phy-id0007.c0f0",
|
|
"ethernet-phy-ieee802.3-c22";
|
|
clocks = <&rcc ETHCK_K>;
|
|
reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
|
|
reset-assert-us = <500>;
|
|
reset-deassert-us = <500>;
|
|
smsc,disable-energy-detect;
|
|
interrupt-parent = <&gpioi>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&fmc {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&fmc_pins_b>;
|
|
pinctrl-1 = <&fmc_sleep_pins_b>;
|
|
status = "okay";
|
|
|
|
ksz8851: ethernet@1,0 {
|
|
compatible = "micrel,ks8851-mll";
|
|
reg = <1 0x0 0x2>, <1 0x2 0x20000>;
|
|
interrupt-parent = <&gpioc>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
bank-width = <2>;
|
|
|
|
/* Timing values are in nS */
|
|
st,fmc2-ebi-cs-mux-enable;
|
|
st,fmc2-ebi-cs-transaction-type = <4>;
|
|
st,fmc2-ebi-cs-buswidth = <16>;
|
|
st,fmc2-ebi-cs-address-setup-ns = <5>;
|
|
st,fmc2-ebi-cs-address-hold-ns = <5>;
|
|
st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
|
|
st,fmc2-ebi-cs-data-setup-ns = <45>;
|
|
st,fmc2-ebi-cs-data-hold-ns = <1>;
|
|
st,fmc2-ebi-cs-write-address-setup-ns = <5>;
|
|
st,fmc2-ebi-cs-write-address-hold-ns = <5>;
|
|
st,fmc2-ebi-cs-write-bus-turnaround-ns = <5>;
|
|
st,fmc2-ebi-cs-write-data-setup-ns = <45>;
|
|
st,fmc2-ebi-cs-write-data-hold-ns = <1>;
|
|
};
|
|
};
|
|
|
|
&gpioa {
|
|
gpio-line-names = "", "", "", "",
|
|
"", "", "DHCOM-K", "",
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpiob {
|
|
gpio-line-names = "", "", "", "",
|
|
"", "", "", "",
|
|
"DHCOM-Q", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpioc {
|
|
gpio-line-names = "", "", "", "",
|
|
"", "", "DHCOM-E", "",
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpiod {
|
|
gpio-line-names = "", "", "", "",
|
|
"", "", "DHCOM-B", "",
|
|
"", "", "", "DHCOM-F",
|
|
"DHCOM-D", "", "", "";
|
|
};
|
|
|
|
&gpioe {
|
|
gpio-line-names = "", "", "", "",
|
|
"", "", "DHCOM-P", "",
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpiof {
|
|
gpio-line-names = "", "", "", "DHCOM-A",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpiog {
|
|
gpio-line-names = "DHCOM-C", "", "", "",
|
|
"", "", "", "",
|
|
"DHCOM-L", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpioh {
|
|
gpio-line-names = "", "", "", "",
|
|
"", "", "", "DHCOM-N",
|
|
"DHCOM-J", "DHCOM-W", "DHCOM-V", "DHCOM-U",
|
|
"DHCOM-T", "", "DHCOM-S", "";
|
|
};
|
|
|
|
&gpioi {
|
|
gpio-line-names = "DHCOM-G", "DHCOM-O", "DHCOM-H", "DHCOM-I",
|
|
"DHCOM-R", "DHCOM-M", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&i2c4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
/* spare dmas for other usage */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
|
|
hwrtc: rtc@32 {
|
|
compatible = "microcrystal,rv8803";
|
|
reg = <0x32>;
|
|
};
|
|
|
|
pmic: stpmic@33 {
|
|
compatible = "st,stpmic1";
|
|
reg = <0x33>;
|
|
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
status = "okay";
|
|
|
|
regulators {
|
|
compatible = "st,stpmic1-regulators";
|
|
ldo1-supply = <&v3v3>;
|
|
ldo2-supply = <&v3v3>;
|
|
ldo3-supply = <&vdd_ddr>;
|
|
ldo5-supply = <&v3v3>;
|
|
ldo6-supply = <&v3v3>;
|
|
pwr_sw1-supply = <&bst_out>;
|
|
pwr_sw2-supply = <&bst_out>;
|
|
|
|
vddcore: buck1 {
|
|
regulator-name = "vddcore";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-initial-mode = <0>;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
vdd_ddr: buck2 {
|
|
regulator-name = "vdd_ddr";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-initial-mode = <0>;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
vdd: buck3 {
|
|
regulator-name = "vdd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
st,mask-reset;
|
|
regulator-initial-mode = <0>;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
v3v3: buck4 {
|
|
regulator-name = "v3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-over-current-protection;
|
|
regulator-initial-mode = <0>;
|
|
};
|
|
|
|
vdda: ldo1 {
|
|
regulator-name = "vdda";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
interrupts = <IT_CURLIM_LDO1 0>;
|
|
};
|
|
|
|
v2v8: ldo2 {
|
|
regulator-name = "v2v8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
interrupts = <IT_CURLIM_LDO2 0>;
|
|
};
|
|
|
|
vtt_ddr: ldo3 {
|
|
regulator-name = "vtt_ddr";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-always-on;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
vdd_usb: ldo4 {
|
|
regulator-name = "vdd_usb";
|
|
interrupts = <IT_CURLIM_LDO4 0>;
|
|
};
|
|
|
|
vdd_sd: ldo5 {
|
|
regulator-name = "vdd_sd";
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
interrupts = <IT_CURLIM_LDO5 0>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
v1v8: ldo6 {
|
|
regulator-name = "v1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
interrupts = <IT_CURLIM_LDO6 0>;
|
|
};
|
|
|
|
vref_ddr: vref_ddr {
|
|
regulator-name = "vref_ddr";
|
|
regulator-always-on;
|
|
};
|
|
|
|
bst_out: boost {
|
|
regulator-name = "bst_out";
|
|
interrupts = <IT_OCP_BOOST 0>;
|
|
};
|
|
|
|
vbus_otg: pwr_sw1 {
|
|
regulator-name = "vbus_otg";
|
|
interrupts = <IT_OCP_OTG 0>;
|
|
};
|
|
|
|
vbus_sw: pwr_sw2 {
|
|
regulator-name = "vbus_sw";
|
|
interrupts = <IT_OCP_SWOUT 0>;
|
|
regulator-active-discharge = <1>;
|
|
};
|
|
};
|
|
|
|
onkey {
|
|
compatible = "st,stpmic1-onkey";
|
|
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
|
|
interrupt-names = "onkey-falling", "onkey-rising";
|
|
power-off-time-sec = <10>;
|
|
status = "okay";
|
|
};
|
|
|
|
watchdog {
|
|
compatible = "st,stpmic1-wdt";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
touchscreen@49 {
|
|
compatible = "ti,tsc2004";
|
|
reg = <0x49>;
|
|
vio-supply = <&v3v3>;
|
|
interrupts-extended = <&gpioh 15 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x50>;
|
|
pagesize = <16>;
|
|
};
|
|
};
|
|
|
|
&ipcc {
|
|
status = "okay";
|
|
};
|
|
|
|
&iwdg2 {
|
|
timeout-sec = <32>;
|
|
status = "okay";
|
|
};
|
|
|
|
&m4_rproc {
|
|
memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
|
|
<&vdev0vring1>, <&vdev0buffer>;
|
|
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
|
|
mbox-names = "vq0", "vq1", "shutdown";
|
|
interrupt-parent = <&exti>;
|
|
interrupts = <68 1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwr_regulators {
|
|
vdd-supply = <&vdd>;
|
|
vdd_3v3_usbfs-supply = <&vdd_usb>;
|
|
};
|
|
|
|
&qspi {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
|
|
pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
|
|
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
flash0: flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-max-frequency = <108000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
|
|
&rng1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc1 {
|
|
pinctrl-names = "default", "opendrain", "sleep", "init";
|
|
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
|
|
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
|
|
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
|
|
pinctrl-3 = <&sdmmc1_b4_init_pins_a &sdmmc1_dir_init_pins_a>;
|
|
cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
|
|
disable-wp;
|
|
st,sig-dir;
|
|
st,neg-edge;
|
|
st,use-ckin;
|
|
st,cmd-gpios = <&gpiod 2 0>;
|
|
st,ck-gpios = <&gpioc 12 0>;
|
|
st,ckin-gpios = <&gpioe 4 0>;
|
|
bus-width = <4>;
|
|
vmmc-supply = <&vdd_sd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc1_b4_pins_a {
|
|
/*
|
|
* SD bus pull-up resistors:
|
|
* - optional on SoMs with SD voltage translator
|
|
* - mandatory on SoMs without SD voltage translator
|
|
*/
|
|
pins1 {
|
|
bias-pull-up;
|
|
};
|
|
pins2 {
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
&sdmmc2 {
|
|
pinctrl-names = "default", "opendrain", "sleep";
|
|
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
|
|
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
|
|
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
|
|
non-removable;
|
|
no-sd;
|
|
no-sdio;
|
|
st,neg-edge;
|
|
bus-width = <8>;
|
|
vmmc-supply = <&v3v3>;
|
|
vqmmc-supply = <&v3v3>;
|
|
mmc-ddr-3_3v;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc3 {
|
|
pinctrl-names = "default", "opendrain", "sleep";
|
|
pinctrl-0 = <&sdmmc3_b4_pins_a>;
|
|
pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
|
|
pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
|
|
broken-cd;
|
|
st,neg-edge;
|
|
bus-width = <4>;
|
|
vmmc-supply = <&v3v3>;
|
|
vqmmc-supply = <&v3v3>;
|
|
mmc-ddr-3_3v;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_pins_a>;
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|