2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-28 22:13:08 +00:00
u-boot/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg
Igor Opaniuk a51fdba3fa board: toradex: add apalis-imx8x 2gb wb it v1.1a module support
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB
IT V1.1A System on Module support [1].

Boot log:
U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300)
CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz at 30C
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    serial@5a070000
Out:   serial@5a070000
Err:   serial@5a070000
Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A,
Serial# 06617018
Net:   eth0: ethernet@5b040000 [PRIME]
Hit any key to stop autoboot:  0

Functionality wise the following is known to be working:
  - eMMC and MMC/SD card
  - Ethernet (*)
  - GPIOs
  - I2C

Unfortunately, there is no USB functionality for the i.MX 8QXP as of
yet.

* With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1)
ETH PHY encounters bring up problems after reset, this will be fixed
soon on SCU FW side.

[1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06 15:31:37 +01:00

24 lines
651 B
INI

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2020 Toradex
*
* Refer doc/imx/mkimage/imx8image.txt for more details about how-to configure
* and create imx8image boot image
*/
#define __ASSEMBLY__
/* Boot from SD, sector size 0x400 */
BOOT_FROM EMMC_FASTBOOT 0x400
/* SoC type IMX8QX */
SOC_TYPE IMX8QX
/* Append seco container image */
APPEND mx8qx-ahab-container.img
/* Create the 2nd container */
CONTAINER
/* Add scfw image with exec attribute */
IMAGE SCU mx8qx-apalis-scfw-tcm.bin
/* Add ATF image with exec attribute */
IMAGE A35 bl31.bin 0x80000000
/* Add U-Boot image with load attribute */
DATA A35 u-boot-dtb.bin 0x80020000