u-boot/board/freescale/p1022ds
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
..
ddr.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
diu.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
law.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
Makefile Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
p1022ds.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
README doc: cleanup - move board READMEs into respective board directories 2012-07-29 15:42:02 +02:00
spl_minimal.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
tlb.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00

Overview
--------
P1022ds is a Low End Dual core platform supporting the P1022 processor
of QorIQ series. P1022 is an e500 based dual core SOC.


Pin Multiplex(hwconfig setting)
-------------------------------
Add the environment 'usb2', 'audclk' and 'tdm' to support pin multiplex
via hwconfig, i.e:
'setenv hwconfig usb2' to enable USB2 and disable eTsec2
'setenv hwconfig tdm' to enable TDM and disable Audio
'setenv hwconfig audclk:12' to enable Audio(codec clock sources is 12MHz)
 and disable TDM
'setenv hwconfig 'usb2;tdm' to enable USB2 and TDM, disable eTsec2 and Audio
'setenv hwconfig 'usb2;audclk:11' to enable USB2 and Audio(codec clock sources
 is 11MHz), disable eTsec2 and TDM

Warning: TDM and AUDIO can not enable simultaneous !
and AUDIO codec clock sources only setting as 11MHz or 12MHz !
'setenv hwconfig 'audclk:12;tdm'	--- error !
'setenv hwconfig 'audclk:11;tdm'	--- error !
'setenv hwconfig 'audclk:10'		--- error !