u-boot/doc
2007-04-18 17:20:22 +02:00
..
I2C_Edge_Conditions Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
README-i386 * Code cleanup: 2003-06-27 21:31:46 +00:00
README-integrator Update make target for ARM supported boards. 2005-10-06 17:08:18 +02:00
README.440-DDR-performance PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance 2006-07-28 18:34:58 +02:00
README.adnpesc1 Code cleanup; make several boards compile & link. 2004-03-14 22:25:36 +00:00
README.adnpesc1_base32 * Patch by Stephan Linz, 09 Mar 2004 2004-03-14 15:20:55 +00:00
README.alaska8220 Patch by TsiChung Liew, 23 Sep 2004: 2004-10-28 00:09:35 +00:00
README.AMCC-eval-boards-cleanup Major cleanup for AMCC PPC4xx eval boards. 2005-08-01 16:49:12 +02:00
README.amigaone * Patch by Thomas Frieden, 13 Nov 2002: 2002-11-19 11:04:11 +00:00
README.ARM-memory-map Patch by Anders Larsen, 09 Jan 2004: 2004-02-08 19:38:38 +00:00
README.ARM-SoC Patch by Steven Scholz, 16 Aug 2004: 2004-10-09 22:21:29 +00:00
README.autoboot Cleanup 2004-10-11 23:10:30 +00:00
README.AVR32 Add AVR32 architecture support 2006-10-24 14:21:16 +02:00
README.bamboo AMCC bamboo (440EP) U-Boot image reduced to 384kbyte 2006-07-27 16:14:05 +02:00
README.bedbug Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
README.cmi * Code cleanup: 2003-06-27 21:31:46 +00:00
README.COBRA5272 Patch by Florian Schlote, 08 Sep 2004: 2005-01-09 18:21:42 +00:00
README.commands Patch by Kenneth Johansson, 30 Jun 2003: 2003-07-01 21:06:45 +00:00
README.commands.itest * Patch by Laurent Mohin, 10 Feb 2004: 2004-02-23 20:48:38 +00:00
README.console Initial revision 2002-11-02 22:58:18 +00:00
README.db64360 * Patch by Ronen Shitrit, 10 Dec 2003: 2004-01-03 00:43:19 +00:00
README.db64460 * Patch by Ronen Shitrit, 10 Dec 2003: 2004-01-03 00:43:19 +00:00
README.dk1c20 Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
README.dk1c20_std32 Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
README.dk1s10 Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
README.dk1s10_mldk20 Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
README.dk1s10_std32 Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
README.dk1s40_std32 Patches by Stephan Linz, 11 Dec 2003: 2004-01-03 19:43:48 +00:00
README.dk20k200_std32 Patches by Stephan Linz, 30 Jan 2004: 2004-02-09 23:12:24 +00:00
README.ebony Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
README.EVB-64260-750CX * Code cleanup: 2003-06-27 21:31:46 +00:00
README.evb64260 Initial revision 2002-11-02 23:30:20 +00:00
README.fads * Code cleanup: 2003-06-27 21:31:46 +00:00
README.IceCube * Temporarily disabled John Kerl's extended MII command code because 2004-04-18 23:32:11 +00:00
README.idma2intr * Patch by Arun Dharankar, 4 Apr 2003: 2003-04-05 00:53:31 +00:00
README.INCA-IP * Patches by Xianghua Xiao, 15 Oct 2003: 2003-10-15 23:53:47 +00:00
README.IPHASE4539 * Code cleanup: 2003-06-27 21:31:46 +00:00
README.JFFS2 * Patch by Paul Ruhland, 17 May 2004: 2004-06-09 13:37:52 +00:00
README.JFFS2_NAND * Configure PPChameleon board to use redundand environment in flash 2004-04-18 19:43:36 +00:00
README.Lite5200B_low_power [PATCH] icecube/lite5200b: document wakeup from low-power support 2007-04-18 12:11:05 +02:00
README.lynxkdi * Patch by Scott McNutt, 21 Jul 2003: 2003-07-27 00:21:01 +00:00
README.m68k Add MCF5282 support (without preloader) 2006-04-20 08:42:42 +02:00
README.MBX Initial revision 2001-12-27 23:05:33 +00:00
README.ml300 Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
README.Modem * Code cleanup: 2003-06-27 21:31:46 +00:00
README.modnet50 Prepare for SoC rework of ARM code: 2005-04-02 23:52:25 +00:00
README.mpc5xx * Code cleanup: 2003-06-27 21:31:46 +00:00
README.mpc74xx Initial revision 2002-11-02 23:30:20 +00:00
README.mpc83xxads Add support for ep8248 board 2005-08-06 01:42:58 +02:00
README.mpc85xxads * Switched default PCI speed for 8540 ADS back to 33MHz 2006-08-09 13:51:05 -05:00
README.mpc85xxcds * Patch by Jon Loeliger, 2005-05-05 2005-07-25 14:05:07 -05:00
README.mpc832xemds Minor cleanup. 2007-03-08 22:52:51 +01:00
README.MPC866 * Patch by Yuli Barcohen, 13 Jul 2004: 2004-09-28 17:59:53 +00:00
README.mpc7448hpc2 Some code cleanup. 2007-03-04 01:36:05 +01:00
README.mpc8349emds.ddrecc Some code cleanup 2006-04-16 10:51:58 +02:00
README.mpc8349itx mpc83xx: Add support for the MPC8349E-mITX-GP 2007-03-02 11:05:54 -06:00
README.mpc8360emds Code cleanup. 2006-11-30 18:02:20 +01:00
README.mpc8641hpcn Add PIXIS FPGA support for MPC8641HPCN board. 2007-04-09 14:25:05 -05:00
README.nand [PATCH] NAND: Partition name support added to NAND subsystem 2006-10-28 17:11:10 +02:00
README.nand-boot-ppc440 Update NAND boot documentation 2006-09-12 08:49:07 +02:00
README.ne2000 * Patches by Richard Woodruff, 01 Oct 2004: 2005-01-09 23:16:25 +00:00
README.NetConsole Update usage of 'nc' in README.NetConsole 2007-04-04 18:12:28 -04:00
README.nios Patch by Scott McNutt, 25 Apr 2004: 2004-05-19 21:33:14 +00:00
README.nios_CFG_NIOS_CPU Patches by Stephan Linz, 11 Dec 2003: 2004-01-03 19:43:48 +00:00
README.nios_DK Patches by Stephan Linz, 11 Dec 2003: 2004-01-03 19:43:48 +00:00
README.ns9750dev * Patch by Markus Pietrek, 24 Feb 2004: 2004-02-26 23:46:20 +00:00
README.ocotea Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
README.ocotea-PIBS-to-U-Boot Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
README.OFT Code cleanup, especially MIPS for GCC 4.x 2005-12-04 00:40:34 +01:00
README.omap730p2 * Patch by Rishi Bhattacharya, 08 May 2004: 2004-06-08 00:22:43 +00:00
README.OXC * Code cleanup: 2003-06-27 21:31:46 +00:00
README.PIP405 Initial revision 2002-11-03 00:38:21 +00:00
README.PlanetCore Document switching between U-Boot and PlanetCore on RPXlite 2005-08-06 02:11:33 +02:00
README.POST * Add support for SK98xx driver 2003-09-05 23:19:14 +00:00
README.ppc440 Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
README.Purple * Code cleanup: 2003-06-27 21:31:46 +00:00
README.PXA_CF * Patch by George G. Davis, 02 Apr 2004: 2004-04-15 23:23:39 +00:00
README.RPXClassic * Code cleanup: 2003-06-27 21:31:46 +00:00
README.RPXlite * Code cleanup: 2003-06-27 21:31:46 +00:00
README.Sandpoint8240 Change all '$(...)' variable references into '${...}' 2005-11-20 21:40:11 +01:00
README.sbc8349 mpc83xx: U-Boot support for Wind River SBC8349 2007-03-02 11:05:53 -06:00
README.SBC8560 Cleanup 2004-10-11 23:10:30 +00:00
README.sbc8560 * Patch by Fred Klatt, 25 Jun 2004: 2004-07-10 21:45:47 +00:00
README.sched * Patch by Arun Dharankar, 4 Apr 2003: 2003-04-05 00:53:31 +00:00
README.serial_multi Add support for CONFIG_SERIAL_MULTI on MPC5xxx 2006-06-16 17:04:45 +02:00
README.silent * Patch by Wolter Kamphuis, 15 Dec 2003: 2004-02-06 21:48:22 +00:00
README.SNTP * Patch by Masami Komiya, 30 Mar 2005: 2005-04-01 00:25:43 +00:00
README.standalone * Allow crc32 to be used at address 0x000 2003-07-26 08:08:08 +00:00
README.stxxtc Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board. 2005-08-15 15:55:00 +02:00
README.TQM8260 * Code cleanup: 2003-06-27 21:31:46 +00:00
README.usb Initial revision 2002-11-02 23:30:20 +00:00
README.video Initial revision 2002-11-03 00:07:02 +00:00
README.VLAN Patches by Pantelis Antoniou, 30 Mar 2004: 2004-04-15 21:48:45 +00:00
README.xpedite1k Patch by Travis Sawyer, 30 Dec 2003: 2004-02-06 23:19:44 +00:00
TODO-i386 * Patch by Marc Singer, 29 May 2003: 2003-05-31 18:35:21 +00:00

			   XES XPedite1000 Board

		    Last Update: December 29, 2003
=======================================================================

This file contains some handy info regarding U-Boot and the XES
XPedite1000 PPC440GX PrPMC board. See the README.ppc440 for additional
information.


SWITCH SETTINGS & JUMPERS
==========================

Jumpers selected for AMD29LV040B flash part as the boot flash.


I2C Strap EEPROM & Environment Settings
=======================================

The XPedite1000 uses a single I2C eeprom for the 440 strappings and for
the environment variables.  The first page (256 bytes) contains the
strappings and the 2 EMAC HW Ethernet addresses.  Be careful not to
change the 1st page of the EEPROM!  Unpopulated jumper J560 can get you
out of trouble as it disables the strapping read from EEPROM.

I2C iprobe
=====================

The i2c utilities work and have been tested on Rev B. of the 440GX. See
README.ebony for more information about i2c probing with the 440.


GETTING OUT OF I2C TROUBLE
===========================

(Direct quote from README.ebony)
If you're like me ... you may have screwed up your bootstrap serial
eeprom ... or worse, your SPD eeprom when experimenting with the
i2c commands. If so, here are some ideas on how to get out of
trouble:

Serial bootstrap eeprom corruption:
-----------------------------------
Power down the board and set the following straps:

J560 - closed

This will select the default sys0 and sys1 settings (the serial
eeproms are not used). Then power up the board and fix the serial
eeprom using the imm command. Here are the values I currently
use:

=> imd 50 0 10

0000: 85 7d 42 06 07 80 11 00 00 00 00 00 00 00 00 00    .}B.............

Once you have the eeproms set correctly change the
J560 straps as you desire.


PPC440GX Ethernet EMACs
=======================

The XES XPedite1000 uses emac 2 & 3 and ignores emac 0 & 1.  PHYs are connected
only to emac 2 & 3.  The HW Ethernet addresses are read from the i2c eeprom and
placed in the bd info structure for enet2addr and enet3addr.  The ethernet driver
senses that enetaddr and enet1addr are 0's and does not use them.

As of this writing gigabit ethernet and the TCPIP acceleration hardware is not
supported.


Flash Support
=============

As of this writing, there is support for the 1/2mb boot flash only.  User flash
is not yet supported.


Regards,
--Travis
<travis.sawyer@sandburst.com>