u-boot/drivers/usb/gadget
Alexey Firago e2ec3e4612 fastboot: add support for reboot-bootloader command
The "fastboot reboot-bootloader" command is defined to
re-enter into fastboot mode after rebooting into
bootloader. This command is usually used after updating
bootloader via fastboot.

This commit implements only a generic side of the
command - setting of the reset flag and then resetting.
Setting of the reset flag is implemented using __weak
fb_set_reboot_flag() function. The actual setting and
checking of the reset flag should be implemented by
a boot script and/or board/SoC specific code.

Signed-off-by: Alexey Firago <alexey_firago@mentor.com>
Tested-by: Steve Rae <srae@broadcom.com>
[Test HW: bcm28155_ap board]
2015-04-14 10:19:05 +02:00
..
udc usb: dwc3: Makefile: Make dwc3 driver compile in u-boot 2015-04-14 05:48:10 +02:00
atmel_usba_udc.c usb: modify usb_gadget_handle_interrupts to take controller index 2015-04-14 05:48:11 +02:00
atmel_usba_udc.h USB: gadget: add atmel usba udc driver 2013-09-24 17:51:35 +02:00
ci_udc.c usb: modify usb_gadget_handle_interrupts to take controller index 2015-04-14 05:48:11 +02:00
ci_udc.h usb: ci_udc: remove controller.items array 2014-07-02 15:45:38 +02:00
composite.c usb: composite: Add .reset callback to usb_gadget_driver structure 2015-04-14 05:48:12 +02:00
config.c usb: gadget: config: fix unaligned access issues 2013-09-24 17:51:35 +02:00
core.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
designware_udc.c linux/kernel.h: sync min, max, min3, max3 macros with Linux 2014-11-23 06:48:30 -05:00
ep0.c cosmetic: replace MIN, MAX with min, max 2014-09-24 18:30:29 -04:00
ep0.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
epautoconf.c usb: dwc3: gadget: add common endpoint configuration for dwc3 udc driver 2015-04-14 05:48:12 +02:00
ether.c usb: modify usb_gadget_handle_interrupts to take controller index 2015-04-14 05:48:11 +02:00
f_dfu.c usb: gadget: f_dfu: Add get_alt function to pass the USB compliance test 2015-01-18 12:31:00 +01:00
f_dfu.h usb: dfu: f_dfu: Provide infrastructure to adjust DFU's Poll Timeout value 2013-12-18 19:53:19 +01:00
f_fastboot.c fastboot: add support for reboot-bootloader command 2015-04-14 10:19:05 +02:00
f_mass_storage.c usb: modify usb_gadget_handle_interrupts to take controller index 2015-04-14 05:48:11 +02:00
f_thor.c usb: gadget: thor: Claim EP after allocating it in thor gadget 2015-04-14 05:48:12 +02:00
f_thor.h sizes.h - consolidate for all architectures 2014-03-04 12:15:01 -05:00
fotg210.c usb: modify usb_gadget_handle_interrupts to take controller index 2015-04-14 05:48:11 +02:00
g_dnl.c usb, g_dnl: generalize DFU detach functions 2014-12-18 12:26:05 +01:00
gadget_chips.h usb: dwc3: gadget: add common endpoint configuration for dwc3 udc driver 2015-04-14 05:48:12 +02:00
Makefile usb: s3c-otg: Split out PHY control 2014-11-07 16:32:02 +01:00
mpc8xx_udc.c cosmetic: replace MIN, MAX with min, max 2014-09-24 18:30:29 -04:00
ndis.h USB: Add USB RNDIS gadget protocol 2011-02-19 20:32:37 +01:00
pxa25x_udc.c usb: modify usb_gadget_handle_interrupts to take controller index 2015-04-14 05:48:11 +02:00
pxa25x_udc.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
pxa27x_udc.c linux/kernel.h: sync min, max, min3, max3 macros with Linux 2014-11-23 06:48:30 -05:00
regs-otg.h driver:usb:s3c_udc: add support for Exynos4x12 2013-12-02 11:22:32 +09:00
rndis.c net: Add ethernet FCS length macro in net.h 2015-03-24 21:22:37 -06:00
rndis.h USB-RNDIS: Send RNDIS state on disconnecting 2011-02-19 20:32:38 +01:00
s3c_udc_otg.c usb: modify usb_gadget_handle_interrupts to take controller index 2015-04-14 05:48:11 +02:00
s3c_udc_otg_phy.c usb: s3c-otg: Split out PHY control 2014-11-07 16:32:02 +01:00
s3c_udc_otg_xfer_dma.c linux/kernel.h: sync min, max, min3, max3 macros with Linux 2014-11-23 06:48:30 -05:00
storage_common.c lib, linux: move linux specific defines to linux/compat.h 2014-08-25 19:25:03 -04:00
usbstring.c usb: handle NULL table in usb_gadget_get_string 2014-04-30 10:30:57 +02:00