u-boot/arch/arm/mach-imx/imx8m
Peng Fan 439321b264 imx: add i.MX8MP EVK board
Add basic i.MX8MP EVK board support

U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800)
power_pca9450b_init
DDRINFO: start DRAM init
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Failed to find clock node. Check device tree
WDT:   Not found!
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0

U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800)

CPU:   Freescale i.MX8MP rev1.0 at 1000 MHz
Reset cause: POR
Model: NXP i.MX8MPlus EVK board
DRAM:  6 GiB
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0
u-boot=> mmc list
FSL_SDHC: 1 (SD)
FSL_SDHC: 2

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:09 +01:00
..
clock_imx8mm.c imx: imx8m: only support non-dm code in clock_imx8mm.c 2020-01-08 13:20:09 +01:00
clock_imx8mq.c imx: imx8mq: handle ESDHC in mxc_get_clock 2020-01-08 13:18:55 +01:00
clock_slice.c imx: imx8mp: add basic clock 2020-01-08 13:20:08 +01:00
imximage-8mm-lpddr4.cfg imx8m: add image cfg for i.MX8MM lpddr4 2019-10-08 16:36:36 +02:00
imximage-8mn-ddr4.cfg imx8m: add i.MX8MN ddr4 image cfg file 2019-11-05 10:27:18 +01:00
imximage-8mp-lpddr4.cfg imx: imx8m: add imximage-8mp-lpddr4.cfg 2020-01-08 13:20:09 +01:00
imximage.cfg imx: imx8m: introduce imximage cfg file 2019-01-01 14:12:18 +01:00
Kconfig imx: add i.MX8MP EVK board 2020-01-08 13:20:09 +01:00
lowlevel_init.S imx: rename mx8m,MX8M to imx8m,IMX8M 2019-01-01 14:12:18 +01:00
Makefile imx: imx8mp: add basic clock 2020-01-08 13:20:08 +01:00
soc.c imx8mp: set BYPASS ID SWAP to avoid AXI bus errors 2020-01-08 13:20:08 +01:00