u-boot/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
Jagan Teki 5217f4991e arm: dts: rockchip: Add HDMI out for RockPI N8/N10
This patch adds support to enable HDMI out for
N10 and N8 combinations SBCs.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00

116 lines
2.1 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
* Copyright (c) 2019 Radxa Limited
* Copyright (c) 2019 Amarula Solutions(India)
*/
#include <dt-bindings/pwm/pwm.h>
/ {
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "clkin_gmac";
#clock-cells = <0>;
};
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vbus_host: vbus-host {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb1_en_oc>;
regulator-name = "vbus_host"; /* HOST-5V */
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
};
vbus_typec: vbus-typec {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb0_en_oc>;
regulator-name = "vbus_typec";
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
};
};
&gmac {
assigned-clock-parents = <&clkin_gmac>;
clock_in_out = "input";
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 50000>;
tx_delay = <0x28>;
rx_delay = <0x11>;
status = "okay";
};
&hdmi {
status = "okay";
};
&pwm0 {
status = "okay";
};
&pwm2 {
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
vqmmc-supply = <&vccio_sd>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts>;
status = "okay";
};
&uart2 {
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};