Commit graph

5 commits

Author SHA1 Message Date
Jagan Teki
5217f4991e arm: dts: rockchip: Add HDMI out for RockPI N8/N10
This patch adds support to enable HDMI out for
N10 and N8 combinations SBCs.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
87027292c1 ARM: dts: rockchip: Add USB for RockPI N8/N10
Radxa dalang carrier board has 2x USB 2.0 and 1x USB 3.0
ports.

This patch adds support to enable all these USB ports for
N10 and N8 combinations SBCs.

Note that the USB 3.0 port on RockPI N8 combination works
as USB 2.0 OTG since it is driven from RK3288.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
2710779efd ARM: dts: rockchip: Sync ROCKPi N8/N10 dts(i) from Linux
Sync ROCKPi N8/N10 dts(i) changes from Linux.

commit <afd9eb880414> ("ARM: dts: rockchip: Add Radxa Rock Pi N8 initial
support")

Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
1a95b1e82c ARM: dts: rockchip: radxa-dalang: Update sdmmc properties
Radxa dalang carrier boards are used to mount vmarc SoM's
of rk3399pro and rk3288 to make complete SBC.

Among these combinations, card detection gpio, max-frequency
properties are used with rk3399pro SoM but not required for
rk3288 SoM based on the hardware schematics.

So, let's move these sdmmc specific properties on associate
vmarc dtsi to make common use of dalang carrier device tree file.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07 19:45:57 +08:00
Jagan Teki
29dac6316a ARM: dts: rockchip: Sync v5.7-rc1 Radxa Dalang Carrier
Carrier board often referred as baseboard. For making
complete SBC or any other industrial boards, these
carrier boards will be used with associated SOMs.

Radxa has Dalang carrier board which supports on-board
peripherals, ports like USB-2.0, USB-3.0, HDMI, MIPI DSI/CSI,
eDP, Ethernet, WiFi, PCIe, USB-C, 40-Pin GPIO header and etc.

Right now Dalang carrier board is used with two SBC-variants:
Rock Pi N10 => VMARC RK3399Por SOM + Dalang carrier board
Rock Pi N8  => VMARC RK3288 SOM + Dalang carrier board(+codec)

So add this carrier board dtsi as a separate file in
ARM directory, so-that the same can reuse it in both
rk3288, rk3399pro variants of Rockchip SOMs.

Sync this dtsi from linux-next v5.7-rc1.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07 19:45:57 +08:00