u-boot/arch/arm
Patrick Delaunay 6fe7dd3327 stm32mp1: add stusb1600 support for DK1 and DK2 board
The DK1 and DK2 boards use the USB Type-C controller STUSB1600.
This patch updates:
- the device tree to add the I2C node in the DT
- the board stm32mp1 to probe this I2C device and use this controller
  to check cable detection.
- the DWC2 driver to support a new dt property
  "u-boot,force-b-session-valid" which forces B session and
  device mode; it is a workaround because the VBUS sensing and
  ID detection isn't available with stusb1600.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21 10:26:52 +02:00
..
cpu pcm052: bk4: sdcard: Add support for SD card booting/recovery 2019-04-13 20:30:08 +02:00
dts stm32mp1: add stusb1600 support for DK1 and DK2 board 2019-04-21 10:26:52 +02:00
include Move to DM 2019-04-15 07:31:14 -04:00
lib arm: print information about loaded UEFI images 2019-04-12 22:00:42 +02:00
mach-aspeed regmap: change regmap_init_mem() to take ofnode instead udevice 2018-05-07 15:49:51 -04:00
mach-at91 arm: at91: Add gardena-gateway-at91sam support 2019-04-09 09:28:50 +03:00
mach-bcm283x arm: Kconfig: spelling fixes 2019-01-18 09:16:15 -05:00
mach-bcmstb board: arm: Add support for Broadcom BCM7260 2018-09-10 21:19:31 -04:00
mach-davinci driver: net: consolidate ti's code in separate folder 2018-11-05 10:41:59 -06:00
mach-exynos exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASE 2019-03-25 17:35:52 -04:00
mach-highbank SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
mach-imx imx: bootaux: add dependency on vf610 2019-04-13 20:30:09 +02:00
mach-integrator env: Convert CONFIG_ENV_IS_IN... to a choice 2017-08-15 20:50:01 -04:00
mach-k3 armv7R: K3: am654: Trigger panic on DDR init failures 2019-04-12 08:05:52 -04:00
mach-keystone ARM: k2g: add a workaround to reset the phy 2019-04-12 08:05:46 -04:00
mach-kirkwood ARM: kirkwood: remove obsolete call to icache_enable 2019-04-12 07:04:18 +02:00
mach-mediatek mt7629: use linux kernel compatible SMP initialization 2018-12-26 21:35:53 -05:00
mach-meson arm: meson: board-gx: Setup VPU in fdt 2019-01-31 09:35:01 +01:00
mach-mvebu arm: mvebu: Add DB-XC3-24G4XG board 2019-04-12 07:04:18 +02:00
mach-omap2 arm: am57xx: cl-som-am57x: remove board support 2019-04-17 09:20:26 -04:00
mach-orion5x arm: remove prototype for get_timer_masked 2018-10-10 13:35:09 -04:00
mach-owl board: Add uCRobotics Bubblegum-96 board support 2018-07-09 15:25:23 -04:00
mach-qemu Kconfig: Sort bool, default, select and imply options 2018-07-30 07:18:48 -04:00
mach-rmobile pinctrl: renesas: Add R8A77965 pin control tables 2019-04-09 18:19:10 +02:00
mach-rockchip Revert "rockchip: Drop call to rockchip_dnl_mode_check() for now" 2019-03-29 09:21:13 +01:00
mach-s5pc1xx exynos: Convert to use CONFIG_BLK 2019-02-09 12:50:21 -07:00
mach-snapdragon arm: mach-snapdragon: pinctrl: clarify gpio disable bit 2019-01-25 12:12:56 -05:00
mach-socfpga ARM: socfpga: Disable D cache in SPL 2019-03-09 17:59:13 +01:00
mach-sti
mach-stm32 mach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7 2018-10-06 14:09:41 -04:00
mach-stm32mp stm32mp1: add command poweroff 2019-04-12 16:09:13 +02:00
mach-sunxi arm: sunxi: Enable DM_MMC and DM_SCSI 2019-04-17 14:34:45 +05:30
mach-tegra arm64: zynqmp: Move SoC sources to mach-zynqmp 2019-01-24 10:03:44 +01:00
mach-uniphier ARM: uniphier: do not modify bootcmd environment variable at run-time 2018-12-29 11:38:33 +09:00
mach-versal arm64: versal: Move IOU_SWITCH_DIVISOR0 to Kconfig 2019-02-14 14:31:10 +01:00
mach-versatile SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
mach-zynq ARM: zynq: Remove addresses for i2c controllers 2019-02-14 14:31:10 +01:00
mach-zynqmp arm64: zynqmp: fix preprocessor check for SPL_ZYNQMP_TWO_SDHCI 2019-04-16 11:52:02 +02:00
mach-zynqmp-r5 arm: zynqmp: Add ZynqMP minimal R5 support 2018-05-11 09:38:23 +02:00
thumb1/include/asm/proc-armv SPDX: Convert a few files that were missed before 2018-05-10 20:38:35 -04:00
config.mk efi_loader: Rename sections to allow for implicit data 2018-07-25 14:57:44 +02:00
Kconfig arm: sunxi: Enable DM_MMC and DM_SCSI 2019-04-17 14:34:45 +05:30
Kconfig.debug
Makefile arm: imx: build mach-imx for i.MX8 2019-01-28 20:35:47 +01:00