mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 05:04:26 +00:00
cd18f1e6e6
Enable driver model support for FEC ethernet which allows us to remove the iomux and board_eth_init function. Replace the toggling of the ethernet phy reset with dt configuration. Enable driver model support for PCI which allows us to remove the eth1000_initialize() call. Additionally enable PCI_INIT_R to scan for PCI devices on init such as the e1000 that is present on the GW552x. Convert board_pci_fixup to use dm callback and remove pcidisable env variable which is not supported for DM_PCI and thus leave PCI always enabled during init. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
671 lines
14 KiB
Text
671 lines
14 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright 2019 Gateworks Corporation
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
/* these are used by bootloader for disabling nodes */
|
|
aliases {
|
|
led0 = &led0;
|
|
led1 = &led1;
|
|
led2 = &led2;
|
|
mmc0 = &usdhc3;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart2;
|
|
};
|
|
|
|
memory@10000000 {
|
|
device_type = "memory";
|
|
reg = <0x10000000 0x20000000>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
user-pb {
|
|
label = "user_pb";
|
|
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_0>;
|
|
};
|
|
|
|
user-pb1x {
|
|
label = "user_pb1x";
|
|
linux,code = <BTN_1>;
|
|
interrupt-parent = <&gsc>;
|
|
interrupts = <0>;
|
|
};
|
|
|
|
key-erased {
|
|
label = "key-erased";
|
|
linux,code = <BTN_2>;
|
|
interrupt-parent = <&gsc>;
|
|
interrupts = <1>;
|
|
};
|
|
|
|
eeprom-wp {
|
|
label = "eeprom_wp";
|
|
linux,code = <BTN_3>;
|
|
interrupt-parent = <&gsc>;
|
|
interrupts = <2>;
|
|
};
|
|
|
|
tamper {
|
|
label = "tamper";
|
|
linux,code = <BTN_4>;
|
|
interrupt-parent = <&gsc>;
|
|
interrupts = <5>;
|
|
};
|
|
|
|
switch-hold {
|
|
label = "switch_hold";
|
|
linux,code = <BTN_5>;
|
|
interrupt-parent = <&gsc>;
|
|
interrupts = <7>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
|
|
|
led0: user1 {
|
|
label = "user1";
|
|
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
|
|
default-state = "on";
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
led1: user2 {
|
|
label = "user2";
|
|
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
|
|
default-state = "off";
|
|
};
|
|
|
|
led2: user3 {
|
|
label = "user3";
|
|
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
pps {
|
|
compatible = "pps-gpio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pps>;
|
|
gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5p0v: regulator-5p0v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5P0V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_wl: regulator-wl {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_reg_wl>;
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "wl";
|
|
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
|
startup-delay-us = <100>;
|
|
enable-active-high;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
|
|
&ecspi3 {
|
|
cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
phy-mode = "rgmii-id";
|
|
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
|
|
phy-reset-duration = <10>;
|
|
phy-reset-post-delay = <100>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpmi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
gsc: gsc@20 {
|
|
compatible = "gw,gsc";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
adc {
|
|
compatible = "gw,gsc-adc";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
channel@6 {
|
|
gw,mode = <0>;
|
|
reg = <0x06>;
|
|
label = "temp";
|
|
};
|
|
|
|
channel@8 {
|
|
gw,mode = <3>;
|
|
reg = <0x08>;
|
|
label = "vdd_bat";
|
|
};
|
|
|
|
channel@82 {
|
|
gw,mode = <2>;
|
|
reg = <0x82>;
|
|
label = "vdd_vin";
|
|
gw,voltage-divider-ohms = <22100 1000>;
|
|
gw,voltage-offset-microvolt = <800000>;
|
|
};
|
|
|
|
channel@84 {
|
|
gw,mode = <2>;
|
|
reg = <0x84>;
|
|
label = "vdd_5p0";
|
|
gw,voltage-divider-ohms = <22100 10000>;
|
|
};
|
|
|
|
channel@86 {
|
|
gw,mode = <2>;
|
|
reg = <0x86>;
|
|
label = "vdd_3p3";
|
|
gw,voltage-divider-ohms = <10000 10000>;
|
|
};
|
|
|
|
channel@88 {
|
|
gw,mode = <2>;
|
|
reg = <0x88>;
|
|
label = "vdd_2p5";
|
|
gw,voltage-divider-ohms = <10000 10000>;
|
|
};
|
|
|
|
channel@8c {
|
|
gw,mode = <2>;
|
|
reg = <0x8c>;
|
|
label = "vdd_3p0";
|
|
};
|
|
|
|
channel@8e {
|
|
gw,mode = <2>;
|
|
reg = <0x8e>;
|
|
label = "vdd_arm";
|
|
};
|
|
|
|
channel@90 {
|
|
gw,mode = <2>;
|
|
reg = <0x90>;
|
|
label = "vdd_soc";
|
|
};
|
|
|
|
channel@92 {
|
|
gw,mode = <2>;
|
|
reg = <0x92>;
|
|
label = "vdd_1p5";
|
|
};
|
|
|
|
channel@98 {
|
|
gw,mode = <2>;
|
|
reg = <0x98>;
|
|
label = "vdd_1p8";
|
|
};
|
|
|
|
channel@9a {
|
|
gw,mode = <2>;
|
|
reg = <0x9a>;
|
|
label = "vdd_1p0";
|
|
gw,voltage-divider-ohms = <10000 10000>;
|
|
};
|
|
|
|
channel@9c {
|
|
gw,mode = <2>;
|
|
reg = <0x9c>;
|
|
label = "vdd_an1";
|
|
gw,voltage-divider-ohms = <10000 10000>;
|
|
};
|
|
|
|
channel@a2 {
|
|
gw,mode = <2>;
|
|
reg = <0xa2>;
|
|
label = "vdd_gsc";
|
|
gw,voltage-divider-ohms = <10000 10000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gsc_gpio: gpio@23 {
|
|
compatible = "nxp,pca9555";
|
|
reg = <0x23>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-parent = <&gsc>;
|
|
interrupts = <4>;
|
|
};
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x50>;
|
|
pagesize = <16>;
|
|
};
|
|
|
|
eeprom@51 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x51>;
|
|
pagesize = <16>;
|
|
};
|
|
|
|
eeprom@52 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x52>;
|
|
pagesize = <16>;
|
|
};
|
|
|
|
eeprom@53 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x53>;
|
|
pagesize = <16>;
|
|
};
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds1672";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
|
|
accel@19 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_accel>;
|
|
compatible = "st,lis2de12";
|
|
reg = <0x19>;
|
|
st,drdy-int-pin = <1>;
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <13 0>;
|
|
interrupt-names = "INT1";
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pcie>;
|
|
reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
|
|
status = "disabled";
|
|
};
|
|
|
|
&pwm3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
|
|
status = "disabled";
|
|
};
|
|
|
|
/* off-board RS232 */
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* serial console */
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* cc1352 */
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
/* Sterling-LWB Bluetooth */
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm4330-bt";
|
|
shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
/* GPS */
|
|
&uart5 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart5>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
vbus-supply = <®_5p0v>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
disable-over-current;
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Sterling-LWB SDIO WiFi */
|
|
&usdhc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
vmmc-supply = <®_wl>;
|
|
non-removable;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
|
|
vmmc-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_accel: accelmuxgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_bten: btengrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi3: escpi3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
|
|
MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
|
|
MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
|
|
MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet: enetgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
|
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
|
|
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_leds: gpioledsgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
|
|
MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
|
|
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpmi_nand: gpminandgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
|
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
|
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
|
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
|
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
|
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
|
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
|
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
|
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
|
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
|
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
|
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
|
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
|
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
|
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pcie: pciegrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_pps: ppsgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm2: pwm2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm3: pwm3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_reg_wl: regwlgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1
|
|
MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1
|
|
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x4001b0b1 /* DIO20 */
|
|
MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x4001b0b1 /* DIO14 */
|
|
MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x4001b0b1 /* DIO15 */
|
|
MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b1 /* TMS */
|
|
MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1 /* TCK */
|
|
MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b1 /* TDO */
|
|
MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b1 /* TDI */
|
|
MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x4001b0b1 /* RST# */
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart4: uart4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
|
|
MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
|
|
MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart5: uart5grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
|
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
|
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
|
|
MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
|
|
MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
|
|
MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
|
|
>;
|
|
};
|
|
|
|
pinctrl_wdog: wdoggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
|
|
>;
|
|
};
|
|
};
|