mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
5d9b166401
There is a second lpddr configuration with 2GB of RAM, but this requires different RAM timings, so in addition to adding the timing file, a separate defconfig is necessary. Signed-off-by: Adam Ford <aford173@gmail.com> |
||
|---|---|---|
| .. | ||
| imx8mn_beacon.c | ||
| Kconfig | ||
| lpddr4_2g_timing.c | ||
| lpddr4_timing.c | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
| spl.c | ||
U-Boot for the Beacon EmbeddedWorks i.MX8M Nano Devkit Quick Start =========== - Build the ARM Trusted firmware binary - Get ddr firmware - Build U-Boot - Boot Get and Build the ARM Trusted firmware ====================================== Note: $(srctree) is U-Boot source directory $ git clone https://source.codeaurora.org/external/imx/imx-atf $ git checkout imx_5.4.47_2.2.0 $ make PLAT=imx8mn bl31 CROSS_COMPILE=aarch64-linux-gnu- $ cp build/imx8mm/release/bl31.bin $(srctree) Get the DDR firmware ==================== $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin $ chmod +x firmware-imx-8.9.bin $ ./firmware-imx-8.9 $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree) Build U-Boot ============ $ make imx8mn_beacon_defconfig $ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x960000 Burn U-Boot to microSD Card =========================== $ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 Boot ==== Set baseboard DIP switch: S17: 1100XXXX