u-boot/board/gdsys/mpc8308/Kconfig
Dirk Eibach d494cdb97e mpc83xx: Add gazerbeam board
The gdsys gazerbeam board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.

On board peripherals include:
- 2x 10/100 Mbit/s Ethernet (optional)

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21 08:03:38 +02:00

124 lines
2 KiB
Text

config GDSYS_LEGACY_OSD_CMDS
bool
help
Use the 'osdw', 'osdp', and 'osdsize' legacy commands required by
gdsys devices.
config GDSYS_LEGACY_DRIVERS
bool
help
Enable the gdsys legacy drivers under board/gdsys/common. If this
option is not set, all relevant DM drivers must be configured for the
device in question.
config SYS_FPGA0_BASE
hex
default E0600000
help
The base address of the first FPGA's register map.
config SYS_FPGA0_SIZE
hex
default 1
help
The base address of the first FPGA's register map.
config SYS_FPGA1_BASE
hex
help
The base address of the second FPGA's register map.
config SYS_FPGA1_SIZE
hex
help
The base address of the second FPGA's register map.
if TARGET_HRCON
config SYS_BOARD
default "mpc8308"
config SYS_VENDOR
default "gdsys"
config SYS_CONFIG_NAME
default "hrcon"
config GDSYS_LEGACY_OSD_CMDS
default y
config GDSYS_LEGACY_DRIVERS
default y
endif
if TARGET_STRIDER
config SYS_BOARD
default "mpc8308"
config SYS_VENDOR
default "gdsys"
config SYS_CONFIG_NAME
default "strider"
config GDSYS_LEGACY_OSD_CMDS
default y
config GDSYS_LEGACY_DRIVERS
default y
endif
if TARGET_GAZERBEAM
config SYS_BOARD
default "mpc8308"
config SYS_VENDOR
default "gdsys"
config SYS_CONFIG_NAME
default "gazerbeam"
config SYS_FPGA1_BASE
default E0700000
config SYS_FPGA1_SIZE
default 1
config GDSYS_LEGACY_OSD_CMDS
default y
endif
if TARGET_HRCON || TARGET_STRIDER || TARGET_GAZERBEAM
choice
prompt "FPGA flavor selection"
config SYS_FPGA_FLAVOR_LEGACY
bool "Legacy flavor"
help
This enables support for the gdsys pre-Gazerbeam FPGA memory layout.
config SYS_FPGA_FLAVOR_GAZERBEAM
bool "Gazerbeam flavor"
help
This enables support for the gdsys FPGA memory layout of the
Gazerbeam board.
endchoice
config EXTENDED_FEATURES
bool "FPGA extended features"
depends on GDSYS_LEGACY_DRIVERS
help
Enable support for the extended features field of the IHS FPGA.
config CMD_IOLOOP
bool "Enable 'ioloop' and 'ioreflect' commands"
help
These commands provide FPGA tests.
endif