u-boot/cpu/arm926ejs/at91
Tom Rix 23b80982a0 Add support for Eukrea CPU9260/CPU9G20 SBC
these boards are built around Atmel's AT91SAM9260/9G20 and have
up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND
and include a 10/100 Ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-13 06:17:35 -05:00
..
at91cap9_devices.c at91: Add CAN init function 2009-07-06 21:52:43 +02:00
at91sam9m10g45_devices.c at91: Introduction of at91sam9g45 SOC. 2009-07-12 17:43:34 +02:00
at91sam9rl_devices.c at91: regroup IP hw init in one file per soc 2009-06-12 20:39:51 +02:00
at91sam9260_devices.c Add support for the Calao SBC35-A9G20 board 2009-09-01 22:13:37 +02:00
at91sam9261_devices.c at91: regroup IP hw init in one file per soc 2009-06-12 20:39:51 +02:00
at91sam9263_devices.c at91: Add CAN init function 2009-07-06 21:52:43 +02:00
clock.c at91: Introduction of at91sam9g45 SOC. 2009-07-12 17:43:34 +02:00
config.mk arm: unify linker script 2009-06-12 20:39:52 +02:00
cpu.c at91: move cpu info print to cpu 2009-06-12 20:45:46 +02:00
led.c at91sam9/at91cap: move common led management to cpu 2009-03-22 13:22:08 +01:00
lowlevel_init.S Add support for Eukrea CPU9260/CPU9G20 SBC 2009-10-13 06:17:35 -05:00
Makefile at91: Introduction of at91sam9g10 SOC. 2009-07-12 17:56:11 +02:00
reset.c at91: extract reset from timer 2009-06-12 20:39:53 +02:00
timer.c at91: extract reset from timer 2009-06-12 20:39:53 +02:00