u-boot/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts
Michael Walle 2bf4658b8c board: sl28: fix RGMII clock and voltage
It was noticed that the clock isn't continuously enabled when there is
no link. This is because the 125MHz clock is derived from the internal
PLL which seems to go into some kind of power-down mode every once in a
while. The LS1028A expects a contiuous clock. Thus enable the PLL all
the time.

Also, the RGMII pad voltage is wrong, it was configured to 2.5V (that is
the VDDH regulator). The correct voltage is 1.8V, i.e. the VDDIO
regulator.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-16 18:14:08 +05:30

49 lines
1 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Device Tree file for the Kontron SMARC-sAL28 board.
*
* This is for the network variant 4 which has two ethernet ports. It
* extends the base and provides one more port connected via RGMII.
*
* Copyright (C) 2019 Michael Walle <michael@walle.cc>
*
*/
/dts-v1/;
#include "fsl-ls1028a-kontron-sl28.dts"
#include <dt-bindings/net/qca-ar803x.h>
/ {
model = "Kontron SMARC-sAL28 (Dual PHY)";
compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
};
&enetc1 {
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
status = "okay";
};
&mdio0 {
phy1: ethernet-phy@4 {
reg = <0x4>;
eee-broken-1000t;
eee-broken-100tx;
qca,clk-out-frequency = <125000000>;
qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
qca,keep-pll-enabled;
vddio-supply = <&vddio>;
vddio: vddio-regulator {
regulator-name = "VDDIO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddh: vddh-regulator {
regulator-name = "VDDH";
};
};
};