u-boot/arch/arm/cpu/armv7/sunxi/board.c
Chen-Yu Tsai 92369844ec sunxi: Enable non-secure access to RTC on sun6i (A31s)
On the A31s the RTC is by default secured. Thus when u-boot
loads the kernel in non-secure world, the RTC is unavailable. The
SoC has a TrustZone Protection Controller, which can be used to
enable non-secure access to the RTC.

On the A31 the TZPC doesn't seem to do anything, i.e. changes to
its register contents do not affect access to the RTC.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-08-31 08:43:42 +02:00

269 lines
7.8 KiB
C

/*
* (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
*
* (C) Copyright 2007-2011
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
* Tom Cubie <tangliang@allwinnertech.com>
*
* Some init for sunxi platform.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mmc.h>
#include <i2c.h>
#include <serial.h>
#ifdef CONFIG_SPL_BUILD
#include <spl.h>
#endif
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/timer.h>
#include <asm/arch/tzpc.h>
#include <asm/arch/mmc.h>
#include <linux/compiler.h>
struct fel_stash {
uint32_t sp;
uint32_t lr;
uint32_t cpsr;
uint32_t sctlr;
uint32_t vbar;
uint32_t cr;
};
struct fel_stash fel_stash __attribute__((section(".data")));
static int gpio_init(void)
{
#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
/* disable GPB22,23 as uart0 tx,rx to avoid conflict */
sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
#endif
#if defined(CONFIG_MACH_SUN8I)
sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0);
#else
sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0);
#endif
sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I))
sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB_UART0);
sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN5I)
sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB_UART0);
sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN6I)
sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH_UART0);
sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A33)
sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0);
sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I)
sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0);
sunxi_gpio_set_pull(SUNXI_GPH(13), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_GPB_UART2);
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL_R_UART);
sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL_R_UART);
sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP);
#else
#error Unsupported console port number. Please fix pin mux settings in board.c
#endif
return 0;
}
void spl_board_load_image(void)
{
debug("Returning to FEL sp=%x, lr=%x\n", fel_stash.sp, fel_stash.lr);
return_to_fel(fel_stash.sp, fel_stash.lr);
}
void s_init(void)
{
#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_A23
/* Magic (undocmented) value taken from boot0, without this DRAM
* access gets messed up (seems cache related) */
setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
#endif
#if defined CONFIG_MACH_SUN6I || \
defined CONFIG_MACH_SUN7I || \
defined CONFIG_MACH_SUN8I
/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
asm volatile(
"mrc p15, 0, r0, c1, c0, 1\n"
"orr r0, r0, #1 << 6\n"
"mcr p15, 0, r0, c1, c0, 1\n");
#endif
#if defined CONFIG_MACH_SUN6I
/* Enable non-secure access to the RTC */
tzpc_init();
#endif
clock_init();
timer_init();
gpio_init();
i2c_init_board();
}
#ifdef CONFIG_SPL_BUILD
DECLARE_GLOBAL_DATA_PTR;
/* The sunxi internal brom will try to loader external bootloader
* from mmc0, nand flash, mmc2.
*/
u32 spl_boot_device(void)
{
struct mmc *mmc0, *mmc1;
/*
* When booting from the SD card or NAND memory, the "eGON.BT0"
* signature is expected to be found in memory at the address 0x0004
* (see the "mksunxiboot" tool, which generates this header).
*
* When booting in the FEL mode over USB, this signature is patched in
* memory and replaced with something else by the 'fel' tool. This other
* signature is selected in such a way, that it can't be present in a
* valid bootable SD card image (because the BROM would refuse to
* execute the SPL in this case).
*
* This checks for the signature and if it is not found returns to
* the FEL code in the BROM to wait and receive the main u-boot
* binary over USB. If it is found, it determines where SPL was
* read from.
*/
if (readl(4) != 0x4E4F4765 || readl(8) != 0x3054422E) /* eGON.BT0 */
return BOOT_DEVICE_BOARD;
/* The BROM will try to boot from mmc0 first, so try that first. */
mmc_initialize(gd->bd);
mmc0 = find_mmc_device(0);
if (sunxi_mmc_has_egon_boot_signature(mmc0))
return BOOT_DEVICE_MMC1;
/* Fallback to booting NAND if enabled. */
if (IS_ENABLED(CONFIG_SPL_NAND_SUPPORT))
return BOOT_DEVICE_NAND;
if (CONFIG_MMC_SUNXI_SLOT_EXTRA == 2) {
mmc1 = find_mmc_device(1);
if (sunxi_mmc_has_egon_boot_signature(mmc1)) {
/*
* spl_mmc.c: spl_mmc_load_image() is hard-coded to
* use find_mmc_device(0), no matter what we
* return. Swap mmc0 and mmc2 to make this work.
*/
mmc0->block_dev.dev = 1;
mmc1->block_dev.dev = 0;
return BOOT_DEVICE_MMC2;
}
}
panic("Could not determine boot source\n");
return -1; /* Never reached */
}
/* No confirmation data available in SPL yet. Hardcode bootmode */
u32 spl_boot_mode(void)
{
return MMCSD_MODE_RAW;
}
void board_init_f(ulong dummy)
{
preloader_console_init();
#ifdef CONFIG_SPL_I2C_SUPPORT
/* Needed early by sunxi_board_init if PMU is enabled */
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
sunxi_board_init();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
board_init_r(NULL, 0);
}
#endif
void reset_cpu(ulong addr)
{
#ifdef CONFIG_SUNXI_GEN_SUN4I
static const struct sunxi_wdog *wdog =
&((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
/* Set the watchdog for its shortest interval (.5s) and wait */
writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
while (1) {
/* sun5i sometimes gets stuck without this */
writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
}
#endif
#ifdef CONFIG_SUNXI_GEN_SUN6I
static const struct sunxi_wdog *wdog =
((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
/* Set the watchdog for its shortest interval (.5s) and wait */
writel(WDT_CFG_RESET, &wdog->cfg);
writel(WDT_MODE_EN, &wdog->mode);
writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
while (1) { }
#endif
}
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif
#ifdef CONFIG_CMD_NET
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
*/
int cpu_eth_init(bd_t *bis)
{
__maybe_unused int rc;
#ifdef CONFIG_MACPWR
gpio_request(CONFIG_MACPWR, "macpwr");
gpio_direction_output(CONFIG_MACPWR, 1);
mdelay(200);
#endif
#ifdef CONFIG_SUNXI_GMAC
rc = sunxi_gmac_initialize(bis);
if (rc < 0) {
printf("sunxi: failed to initialize gmac\n");
return rc;
}
#endif
return 0;
}
#endif