Peng Fan 8df42bee0e misc: mxc_ocotp: check fuse word before programming on i.MX7ULP ... On i.MX7ULP, the fuse words (except bank 0 and 1) only supports to write once, because they use ECC mode. Multiple writes may damage the ECC value and cause a wrong fuse value decoded when reading. This patch adds a checking before the fuse word programming, only can write when the word value is 0. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>		2018-01-12 14:28:04 +01:00
..
ali512x.c
altera_sysid.c	dm: Rename dev_addr..() functions	2017-06-01 07:03:01 -06:00
atsha204a-i2c.c	drivers/misc: Add basic support for ATSHA204A Crypto module	2017-07-12 06:57:38 +02:00
cbmem_console.c	Add more SPDX-License-Identifier tags	2016-01-19 08:31:21 -05:00
cros_ec.c	dm: core: Add ofnode_for_each_subnode()	2017-09-11 21:43:58 -06:00
cros_ec_i2c.c	cros_ec: i2c: Add support for version 3 of the EC protocol	2017-02-08 06:12:16 -07:00
cros_ec_lpc.c	cros_ec: exynos: Match up device tree with kernel version	2015-04-18 11:11:16 -06:00
cros_ec_sandbox.c	dm: ofnode: rename ofnode_read_prop() to ofnode_get_property()	2017-07-11 10:08:20 -06:00
cros_ec_spi.c	dm: Rename dev_get_parentdata() to dev_get_parent_priv()	2015-10-23 09:42:28 -06:00
ds4510.c	Kconfig: Drop CONFIG_SYS_I2C_DS4510_ADDR	2017-05-22 08:37:12 -04:00
ds4510.h	Kconfig: Drop CONFIG_CMD_DS4510	2017-05-22 08:37:07 -04:00
fsl_devdis.c	arm/ls102xa:add hwconfig setting to support disable unused devices	2015-09-01 21:49:20 -05:00
fsl_ifc.c	armv8/ls2085aqds: NAND boot support	2015-04-23 16:46:50 -07:00
fsl_iim.c	powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x	2017-06-16 10:14:55 -04:00
fsl_portals.c	drivers/misc: Share qbman init between archs	2018-01-10 12:28:47 -08:00
fsl_sec_mon.c	fsl_sec_mon: Update driver for Security Monitor	2016-10-06 09:54:14 -07:00
gpio_led.c	status_led: Kconfig migration	2017-01-21 15:12:33 -05:00
i2c_eeprom.c	misc: i2c_eeprom: Add compatible for AT24MAC402	2017-09-12 17:58:54 -04:00
i2c_eeprom_emul.c	dm: Update the I2C eeprom driver for livetree	2017-06-01 07:03:15 -06:00
Kconfig	dm: misc: add stm32 rcc driver	2017-09-22 07:40:02 -04:00
Makefile	drivers/misc: Share qbman init between archs	2018-01-10 12:28:47 -08:00
mc9sdz60.c	treewide: replace #include <asm/errno.h> with <linux/errno.h>	2016-09-23 17:55:42 -04:00
misc-uclass.c	misc: add "call" uclass op	2016-08-12 11:01:22 -06:00
mxc_ocotp.c	misc: mxc_ocotp: check fuse word before programming on i.MX7ULP	2018-01-12 14:28:04 +01:00
mxs_ocotp.c	treewide: replace #include <asm/errno.h> with <linux/errno.h>	2016-09-23 17:55:42 -04:00
ns87308.c
nuvoton_nct6102d.c	misc: Add simple driver for some Nuvoton NCT6102D devices	2016-08-16 11:44:09 +08:00
pca9551_led.c	status_led: Kconfig migration	2017-01-21 15:12:33 -05:00
pwrseq-uclass.c	dm: Add a power sequencing uclass	2016-01-21 20:42:34 -07:00
qfw.c	x86: Use unsigned long for address in table generation	2017-02-06 11:38:46 +08:00
rockchip-efuse.c	rockchip: efuse: change to use dev_read_addr_ptr	2017-09-18 20:40:37 +02:00
smsc_lpc47m.c	x86: superio: Add keyboard controller support to smsc_lpc47m driver	2015-08-26 07:54:12 -07:00
smsc_sio1007.c	superio: Add SMSC SIO1007 driver	2016-02-21 13:42:52 +08:00
spltest_sandbox.c	dm: sandbox: Add a simple driver to test of-platdata	2016-07-14 20:40:24 -06:00
status_led.c	status_led: Kconfig migration	2017-01-21 15:12:33 -05:00
stm32_rcc.c	dm: misc: bind STM32F4/F7 clock from rcc MFD driver	2017-11-29 22:30:50 -05:00
swap_case.c	sandbox: Add missing errno.h includes in a few files	2015-05-14 18:49:34 -06:00
syscon_sandbox.c	dm: test: Add a test for the system controller uclass	2015-07-21 17:39:33 -06:00
tegra186_bpmp.c	treewide: replace with error() with pr_err()	2017-10-04 11:59:44 -04:00
tegra_car.c	dm: core: Update device_bind_driver_to_node() to use ofnode	2017-06-01 07:03:08 -06:00
twl4030_led.c
winbond_w83627.c	misc: Add simple driver to enable the legacy UART on Winbond Super IO chips	2016-01-28 13:53:30 +08:00