mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-24 21:54:01 +00:00
superio: Add SMSC SIO1007 driver
The SMSC SIO1007 superio chipset integrates two ns16550 compatible serial ports for legacy applications, 16 GPIO pins and some other functionalities like power management. This adds a simple driver to enable serial port and handle GPIO. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
parent
4374139627
commit
98af34f897
3 changed files with 242 additions and 0 deletions
|
@ -32,6 +32,7 @@ ifdef CONFIG_DM_I2C
|
|||
obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o
|
||||
endif
|
||||
obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o
|
||||
obj-$(CONFIG_SMSC_SIO1007) += smsc_sio1007.o
|
||||
obj-$(CONFIG_STATUS_LED) += status_led.o
|
||||
obj-$(CONFIG_SANDBOX) += swap_case.o
|
||||
obj-$(CONFIG_SANDBOX) += syscon_sandbox.o
|
||||
|
|
126
drivers/misc/smsc_sio1007.c
Normal file
126
drivers/misc/smsc_sio1007.c
Normal file
|
@ -0,0 +1,126 @@
|
|||
/*
|
||||
* Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/io.h>
|
||||
#include <errno.h>
|
||||
#include <smsc_sio1007.h>
|
||||
|
||||
static inline u8 sio1007_read(int port, int reg)
|
||||
{
|
||||
outb(reg, port);
|
||||
|
||||
return inb(port + 1);
|
||||
}
|
||||
|
||||
static inline void sio1007_write(int port, int reg, int val)
|
||||
{
|
||||
outb(reg, port);
|
||||
outb(val, port + 1);
|
||||
}
|
||||
|
||||
static inline void sio1007_clrsetbits(int port, int reg, u8 clr, u8 set)
|
||||
{
|
||||
sio1007_write(port, reg, (sio1007_read(port, reg) & ~clr) | set);
|
||||
}
|
||||
|
||||
void sio1007_enable_serial(int port, int num, int iobase, int irq)
|
||||
{
|
||||
if (num < 0 || num > SIO1007_UART_NUM)
|
||||
return;
|
||||
|
||||
/* enter configuration state */
|
||||
outb(0x55, port);
|
||||
|
||||
/* power on serial port and set up its i/o base & irq */
|
||||
if (!num) {
|
||||
sio1007_clrsetbits(port, DEV_POWER_CTRL, 0, UART1_POWER_ON);
|
||||
sio1007_clrsetbits(port, UART1_IOBASE, 0xfe, iobase >> 2);
|
||||
sio1007_clrsetbits(port, UART_IRQ, 0xf0, irq << 4);
|
||||
} else {
|
||||
sio1007_clrsetbits(port, DEV_POWER_CTRL, 0, UART2_POWER_ON);
|
||||
sio1007_clrsetbits(port, UART2_IOBASE, 0xfe, iobase >> 2);
|
||||
sio1007_clrsetbits(port, UART_IRQ, 0x0f, irq);
|
||||
}
|
||||
|
||||
/* exit configuration state */
|
||||
outb(0xaa, port);
|
||||
}
|
||||
|
||||
void sio1007_enable_runtime(int port, int iobase)
|
||||
{
|
||||
/* enter configuration state */
|
||||
outb(0x55, port);
|
||||
|
||||
/* set i/o base for the runtime register block */
|
||||
sio1007_clrsetbits(port, RTR_IOBASE_LOW, 0, iobase >> 4);
|
||||
sio1007_clrsetbits(port, RTR_IOBASE_HIGH, 0, iobase >> 12);
|
||||
/* turn on address decoding for this block */
|
||||
sio1007_clrsetbits(port, DEV_ACTIVATE, 0, RTR_EN);
|
||||
|
||||
/* exit configuration state */
|
||||
outb(0xaa, port);
|
||||
}
|
||||
|
||||
void sio1007_gpio_config(int port, int gpio, int dir, int pol, int type)
|
||||
{
|
||||
int reg = GPIO0_DIR;
|
||||
|
||||
if (gpio < 0 || gpio > SIO1007_GPIO_NUM)
|
||||
return;
|
||||
if (gpio >= GPIO_NUM_PER_GROUP) {
|
||||
reg = GPIO1_DIR;
|
||||
gpio -= GPIO_NUM_PER_GROUP;
|
||||
}
|
||||
|
||||
/* enter configuration state */
|
||||
outb(0x55, port);
|
||||
|
||||
/* set gpio pin direction, polority and type */
|
||||
sio1007_clrsetbits(port, reg, 1 << gpio, dir << gpio);
|
||||
sio1007_clrsetbits(port, reg + 1, 1 << gpio, pol << gpio);
|
||||
sio1007_clrsetbits(port, reg + 2, 1 << gpio, type << gpio);
|
||||
|
||||
/* exit configuration state */
|
||||
outb(0xaa, port);
|
||||
}
|
||||
|
||||
int sio1007_gpio_get_value(int port, int gpio)
|
||||
{
|
||||
int reg = GPIO0_DATA;
|
||||
int val;
|
||||
|
||||
if (gpio < 0 || gpio > SIO1007_GPIO_NUM)
|
||||
return -EINVAL;
|
||||
if (gpio >= GPIO_NUM_PER_GROUP) {
|
||||
reg = GPIO1_DATA;
|
||||
gpio -= GPIO_NUM_PER_GROUP;
|
||||
}
|
||||
|
||||
val = inb(port + reg);
|
||||
if (val & (1 << gpio))
|
||||
return 1;
|
||||
else
|
||||
return 0;
|
||||
}
|
||||
|
||||
void sio1007_gpio_set_value(int port, int gpio, int val)
|
||||
{
|
||||
int reg = GPIO0_DATA;
|
||||
u8 data;
|
||||
|
||||
if (gpio < 0 || gpio > SIO1007_GPIO_NUM)
|
||||
return;
|
||||
if (gpio >= GPIO_NUM_PER_GROUP) {
|
||||
reg = GPIO1_DATA;
|
||||
gpio -= GPIO_NUM_PER_GROUP;
|
||||
}
|
||||
|
||||
data = inb(port + reg);
|
||||
data &= ~(1 << gpio);
|
||||
data |= (val << gpio);
|
||||
outb(data, port + reg);
|
||||
}
|
115
include/smsc_sio1007.h
Normal file
115
include/smsc_sio1007.h
Normal file
|
@ -0,0 +1,115 @@
|
|||
/*
|
||||
* Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef _SMSC_SIO1007_H_
|
||||
#define _SMSC_SIO1007_H_
|
||||
|
||||
/*
|
||||
* The I/O base address of SIO1007 at power-up is determined by the SYSOPT0
|
||||
* and SYSOPT1 pins at the deasserting edge of PCIRST#. The combination of
|
||||
* SYSOPT0 and SYSOPT1 determines one of the following addresses.
|
||||
*/
|
||||
#define SIO1007_IOPORT0 0x002e
|
||||
#define SIO1007_IOPORT1 0x004e
|
||||
#define SIO1007_IOPORT2 0x162e
|
||||
#define SIO1007_IOPORT3 0x164e
|
||||
|
||||
/* SIO1007 registers */
|
||||
|
||||
#define DEV_POWER_CTRL 0x02
|
||||
#define UART1_POWER_ON (1 << 3)
|
||||
#define UART2_POWER_ON (1 << 7)
|
||||
|
||||
#define UART1_IOBASE 0x24
|
||||
#define UART2_IOBASE 0x25
|
||||
#define UART_IRQ 0x28
|
||||
|
||||
#define RTR_IOBASE_HIGH 0x21
|
||||
#define RTR_IOBASE_LOW 0x30
|
||||
|
||||
#define GPIO0_DIR 0x31
|
||||
#define GPIO1_DIR 0x35
|
||||
#define GPIO_DIR_INPUT 0
|
||||
#define GPIO_DIR_OUTPUT 1
|
||||
|
||||
#define GPIO0_POL 0x32
|
||||
#define GPIO1_POL 0x36
|
||||
#define GPIO_POL_NO_INVERT 0
|
||||
#define GPIO_POL_INVERT 1
|
||||
|
||||
#define GPIO0_TYPE 0x33
|
||||
#define GPIO1_TYPE 0x37
|
||||
#define GPIO_TYPE_PUSH_PULL 0
|
||||
#define GPIO_TYPE_OPEN_DRAIN 1
|
||||
|
||||
#define DEV_ACTIVATE 0x3a
|
||||
#define RTR_EN (1 << 1)
|
||||
|
||||
/* Runtime register offset */
|
||||
|
||||
#define GPIO0_DATA 0xc
|
||||
#define GPIO1_DATA 0xe
|
||||
|
||||
/* Number of serial ports supported */
|
||||
#define SIO1007_UART_NUM 2
|
||||
|
||||
/* Number of gpio pins supported */
|
||||
#define GPIO_NUM_PER_GROUP 8
|
||||
#define GPIO_GROUP_NUM 2
|
||||
#define SIO1007_GPIO_NUM (GPIO_NUM_PER_GROUP * GPIO_GROUP_NUM)
|
||||
|
||||
/**
|
||||
* Configure the I/O port address of the specified serial device and
|
||||
* enable the serial device.
|
||||
*
|
||||
* @port: SIO1007 I/O port address
|
||||
* @num: serial device number (0 or 1)
|
||||
* @iobase: processor I/O port address to assign to this serial device
|
||||
* @irq: processor IRQ number to assign to this serial device
|
||||
*/
|
||||
void sio1007_enable_serial(int port, int num, int iobase, int irq);
|
||||
|
||||
/**
|
||||
* Configure the I/O port address of the runtime register block and
|
||||
* enable the address decoding.
|
||||
*
|
||||
* @port: SIO1007 I/O port address
|
||||
* @iobase: processor I/O port address to assign to the runtime registers
|
||||
*/
|
||||
void sio1007_enable_runtime(int port, int iobase);
|
||||
|
||||
/**
|
||||
* Configure the direction/polority/type of a specified GPIO pin
|
||||
*
|
||||
* @port: SIO1007 I/O port address
|
||||
* @gpio: GPIO number (0-7 for GP10-GP17, 8-15 for GP30-GP37)
|
||||
* @dir: GPIO_DIR_INPUT or GPIO_DIR_OUTPUT
|
||||
* @pol: GPIO_POL_NO_INVERT or GPIO_POL_INVERT
|
||||
* @type: GPIO_TYPE_PUSH_PULL or GPIO_TYPE_OPEN_DRAIN
|
||||
*/
|
||||
void sio1007_gpio_config(int port, int gpio, int dir, int pol, int type);
|
||||
|
||||
/**
|
||||
* Get a GPIO pin value.
|
||||
* This will work whether the GPIO is an input or an output.
|
||||
*
|
||||
* @port: runtime register block I/O port address
|
||||
* @gpio: GPIO number (0-7 for GP10-GP17, 8-15 for GP30-GP37)
|
||||
* @return: 0 if low, 1 if high, -EINVAL if gpio number is invalid
|
||||
*/
|
||||
int sio1007_gpio_get_value(int port, int gpio);
|
||||
|
||||
/**
|
||||
* Set a GPIO pin value.
|
||||
* This will only work when the GPIO is configured as an output.
|
||||
*
|
||||
* @port: runtime register block I/O port address
|
||||
* @gpio: GPIO number (0-7 for GP10-GP17, 8-15 for GP30-GP37)
|
||||
* @val: 0 if low, 1 if high
|
||||
*/
|
||||
void sio1007_gpio_set_value(int port, int gpio, int val);
|
||||
|
||||
#endif /* _SMSC_SIO1007_H_ */
|
Loading…
Reference in a new issue