u-boot/board/kup/kup4x/kup4x.c
wdenk 02b11f8e09 Patch by Klaus Heydeck, 12 May 2004:
Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
various changes to KUP4 board specific files
2004-05-12 22:54:36 +00:00

312 lines
8.1 KiB
C

/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc8xx.h>
#include <post.h>
#include "../common/kup.h"
#ifdef CONFIG_KUP4K_LOGO
/* #include "s1d13706.h" */
#endif
#define KUP4X_USB
typedef struct {
volatile unsigned char *VmemAddr;
volatile unsigned char *RegAddr;
} FB_INFO_S1D13xxx;
/* ------------------------------------------------------------------------- */
int usb_init_kup4x (void);
#ifdef CONFIG_KUP4K_LOGO
void lcd_logo (bd_t * bd);
#endif
/* ------------------------------------------------------------------------- */
#define _NOT_USED_ 0xFFFFFFFF
const uint sdram_table[] = {
/*
* Single Read. (Offset 0 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
0x1FF77C47, /* last */
/*
* SDRAM Initialization (offset 5 in UPMA RAM)
*
* This is no UPM entry point. The following definition uses
* the remaining space to establish an initialization
* sequence, which is executed by a RUN command.
*
*/
0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
/*
* Burst Read. (Offset 8 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18 in UPMA RAM)
*/
0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
_NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Refresh (Offset 30 in UPMA RAM)
*/
0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
0xFFFFFC84, 0xFFFFFC07, /* last */
_NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3c in UPMA RAM)
*/
0x7FFFFC07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*/
int checkboard (void)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
volatile uchar *latch;
uchar rev, mod;
/*
* Init ChipSelect #4 (CAN + HW-Latch)
*/
memctl->memc_or4 = 0xFFFF8926;
memctl->memc_br4 = 0x90000401;
__asm__ ("eieio");
latch = (volatile uchar *) 0x90000200;
rev = (*latch & 0xF8) >> 3;
mod = (*latch & 0x03);
printf ("Board: KUP4X Rev %d.%d\n",rev,mod);
return (0);
}
/* ------------------------------------------------------------------------- */
long int initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size_b0 = 0;
long int size_b1 = 0;
long int size_b2 = 0;
long int size_b3 = 0;
upmconfig (UPMA, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
/*
* Preliminary prescaler for refresh (depends on number of
* banks): This value is selected for four cycles every 62.4 us
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
memctl->memc_mptpr = CFG_MPTPR;
memctl->memc_mar = 0x00000088;
/*
* Map controller banks 1 and 2 to the SDRAM banks 2 and 3 at
* preliminary addresses - these have to be modified after the
* SDRAM size has been determined.
*/
/* memctl->memc_or1 = CFG_OR1_PRELIM; */
/* memctl->memc_br1 = CFG_BR1_PRELIM; */
/* memctl->memc_or2 = CFG_OR2_PRELIM; */
/* memctl->memc_br2 = CFG_BR2_PRELIM; */
memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
/* perform SDRAM initializsation sequence */
memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
udelay (1);
memctl->memc_mcr = 0x80002830; /* SDRAM bank 0 - execute twice */
udelay (1);
memctl->memc_mcr = 0x80002106; /* SDRAM bank 0 - RUN MRS Pattern from loc 6 */
udelay (1);
memctl->memc_mcr = 0x80004105; /* SDRAM bank 1 */
udelay (1);
memctl->memc_mcr = 0x80004830; /* SDRAM bank 1 - execute twice */
udelay (1);
memctl->memc_mcr = 0x80004106; /* SDRAM bank 1 - RUN MRS Pattern from loc 6 */
udelay (1);
memctl->memc_mcr = 0x80006105; /* SDRAM bank 2 */
udelay (1);
memctl->memc_mcr = 0x80006830; /* SDRAM bank 2 - execute twice */
udelay (1);
memctl->memc_mcr = 0x80006106; /* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
udelay (1);
memctl->memc_mcr = 0x8000C105; /* SDRAM bank 2 */
udelay (1);
memctl->memc_mcr = 0x8000C830; /* SDRAM bank 2 - execute twice */
udelay (1);
memctl->memc_mcr = 0x8000C106; /* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
udelay (1);
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
udelay (1000);
#if 0 /* 4 x 8MB */
size_b0 = 0x00800000;
size_b1 = 0x00800000;
size_b2 = 0x00800000;
size_b3 = 0x00800000;
memctl->memc_mptpr = CFG_MPTPR;
udelay (1000);
memctl->memc_or1 = 0xFF800A00;
memctl->memc_br1 = 0x00000081;
memctl->memc_or2 = 0xFF000A00;
memctl->memc_br2 = 0x00800081;
memctl->memc_or3 = 0xFE000A00;
memctl->memc_br3 = 0x01000081;
memctl->memc_or6 = 0xFE000A00;
memctl->memc_br6 = 0x01800081;
#else /* 4 x 16 MB */
size_b0 = 0x01000000;
size_b1 = 0x01000000;
size_b2 = 0x01000000;
size_b3 = 0x01000000;
memctl->memc_mptpr = CFG_MPTPR;
udelay (1000);
memctl->memc_or1 = 0xFF000A00;
memctl->memc_br1 = 0x00000081;
memctl->memc_or2 = 0xFE000A00;
memctl->memc_br2 = 0x01000081;
memctl->memc_or3 = 0xFD000A00;
memctl->memc_br3 = 0x02000081;
memctl->memc_or6 = 0xFC000A00;
memctl->memc_br6 = 0x03000081;
#endif
udelay (10000);
return (size_b0 + size_b1 + size_b2 + size_b3);
}
/* ------------------------------------------------------------------------- */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
#if 0
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
volatile long int *addr;
ulong cnt, val;
ulong save[32]; /* to make test non-destructive */
unsigned char i = 0;
memctl->memc_mamr = mamr_value;
for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
addr = base + cnt; /* pointer arith! */
save[i++] = *addr;
*addr = ~cnt;
}
/* write 0 to base address */
addr = base;
save[i] = *addr;
*addr = 0;
/* check at base address */
if ((val = *addr) != 0) {
*addr = save[i];
return (0);
}
for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
addr = base + cnt; /* pointer arith! */
val = *addr;
*addr = save[--i];
if (val != (~cnt)) {
return (cnt * sizeof (long));
}
}
return (maxsize);
}
#endif
int misc_init_r (void)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
#ifdef CONFIG_IDE_LED
/* Configure PA8 as output port */
immap->im_ioport.iop_padir |= 0x80;
immap->im_ioport.iop_paodr |= 0x80;
immap->im_ioport.iop_papar &= ~0x80;
immap->im_ioport.iop_padat |= 0x80; /* turn it off */
#endif
#ifdef KUP4X_USB
usb_init_kup4x ();
#endif
setenv ("hw", "4x");
poweron_key ();
return (0);
}