2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-19 09:43:08 +00:00
u-boot/arch/arm/dts/imx8mm-evk-u-boot.dtsi
Jagan Teki c1f09505d5 arm64: dts: imx8mm: Add common -u-boot.dtsi
/soc@0
aips1
aips2
aips3
clk
iomuxc
osc_24m

are common node enablements across imx8mm platform for dm-spi,
dm-pre-reloc stages.

Move them into common dtsi, imx8mm-u-boot.dtsi

Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Teresa Remmet <t.remmet@phytec.de>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02 12:46:54 +02:00

220 lines
3 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2019 NXP
*/
#include "imx8mm-u-boot.dtsi"
/ {
binman: binman {
multiple-images;
};
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdog1>;
u-boot,dm-spl;
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
};
&reg_usdhc2_vmmc {
u-boot,off-on-delay-us = <20000>;
};
&pinctrl_reg_usdhc2_vmmc {
u-boot,dm-spl;
};
&pinctrl_uart2 {
u-boot,dm-spl;
};
&pinctrl_usdhc2_gpio {
u-boot,dm-spl;
};
&pinctrl_usdhc2 {
u-boot,dm-spl;
};
&pinctrl_usdhc3 {
u-boot,dm-spl;
};
&gpio1 {
u-boot,dm-spl;
};
&gpio2 {
u-boot,dm-spl;
};
&gpio3 {
u-boot,dm-spl;
};
&gpio4 {
u-boot,dm-spl;
};
&gpio5 {
u-boot,dm-spl;
};
&uart2 {
u-boot,dm-spl;
};
&usdhc1 {
u-boot,dm-spl;
};
&usdhc2 {
u-boot,dm-spl;
sd-uhs-sdr104;
sd-uhs-ddr50;
fsl,signal-voltage-switch-extra-delay-ms = <8>;
};
&usdhc3 {
u-boot,dm-spl;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
};
&i2c1 {
u-boot,dm-spl;
};
&{/soc@0/bus@30800000/i2c@30a20000/pca9450@25} {
u-boot,dm-spl;
};
&{/soc@0/bus@30800000/i2c@30a20000/pca9450@25/regulators} {
u-boot,dm-spl;
};
&pinctrl_i2c1 {
u-boot,dm-spl;
};
&pinctrl_pmic {
u-boot,dm-spl;
};
&fec1 {
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
};
&wdog1 {
u-boot,dm-spl;
};
&binman {
u-boot-spl-ddr {
filename = "u-boot-spl-ddr.bin";
pad-byte = <0xff>;
align-size = <4>;
align = <4>;
u-boot-spl {
align-end = <4>;
};
blob_1: blob-ext@1 {
filename = "lpddr4_pmu_train_1d_imem.bin";
size = <0x8000>;
};
blob_2: blob-ext@2 {
filename = "lpddr4_pmu_train_1d_dmem.bin";
size = <0x4000>;
};
blob_3: blob-ext@3 {
filename = "lpddr4_pmu_train_2d_imem.bin";
size = <0x8000>;
};
blob_4: blob-ext@4 {
filename = "lpddr4_pmu_train_2d_dmem.bin";
size = <0x4000>;
};
};
flash {
mkimage {
args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
blob {
filename = "u-boot-spl-ddr.bin";
};
};
};
itb {
filename = "u-boot.itb";
fit {
description = "Configuration to load ATF before U-Boot";
#address-cells = <1>;
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
images {
uboot {
description = "U-Boot (64-bit)";
type = "standalone";
arch = "arm64";
compression = "none";
load = <CONFIG_SYS_TEXT_BASE>;
uboot_blob: blob-ext {
filename = "u-boot-nodtb.bin";
};
};
atf {
description = "ARM Trusted Firmware";
type = "firmware";
arch = "arm64";
compression = "none";
load = <0x920000>;
entry = <0x920000>;
atf_blob: blob-ext {
filename = "bl31.bin";
};
};
fdt {
description = "NAME";
type = "flat_dt";
compression = "none";
uboot_fdt_blob: blob-ext {
filename = "u-boot.dtb";
};
};
};
configurations {
default = "conf";
conf {
description = "NAME";
firmware = "uboot";
loadables = "atf";
fdt = "fdt";
};
};
};
};
};