u-boot/arch/arm/mach-at91
Ben Whitten 5aaef60077 board: laird: add WB45N CPU module
This board is based on the Atmel 9x5 eval board.
Supporting the following features:
 - Boot from NAND Flash
 - Ethernet
 - FIT
 - SPL

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Dan Kephart <dan.kephart@lairdtech.com>
2017-11-29 22:36:59 -05:00
..
arm920t Change my mailaddress 2016-05-02 18:37:09 -04:00
arm926ejs Drop CONFIG_HAS_DATAFLASH 2017-10-16 09:42:51 -04:00
armv7 ARM: at91: Get the Chip ID of SAMA5D2 SiP 2017-09-14 16:02:45 -04:00
include/mach board: laird: add WB45N CPU module 2017-11-29 22:36:59 -05:00
atmel_sfr.c ARM: at91: Remove hardware.h included in configs 2017-09-14 16:02:47 -04:00
bootparams_atmel.S ARM: sama5d2: Implement boot device autodetection 2016-05-24 08:08:37 +02:00
clock.c ARM: at91: clock: add PMC_PLLICPR init function 2016-02-18 21:34:41 +01:00
config.mk ARM: at91: collect SoC sources into mach-at91 2015-02-21 08:23:51 -05:00
Kconfig board: laird: add WB45N CPU module 2017-11-29 22:36:59 -05:00
Makefile ARM: at91: sama5: Extend boot device autodetection 2016-06-12 23:49:38 +02:00
matrix.c ARM: at91: Remove hardware.h included in configs 2017-09-14 16:02:47 -04:00
mpddrc.c arm: at91/spl: mpddrc: use IP version to check configuration 2016-02-02 11:49:12 +01:00
phy.c ARM: at91: Remove hardware.h included in configs 2017-09-14 16:02:47 -04:00
sdram.c ARM: cpu: at91: clean up peripheral clock code 2016-02-18 21:34:40 +01:00
spl.c ARM: at91: spl: Add macro CONFIG_XXXX_BOOT support 2017-09-14 16:02:47 -04:00
spl_at91.c ARM: at91: clean up the PMC_PLLICPR init code 2016-02-18 21:34:41 +01:00
spl_atmel.c ARM: at91: spl: Adjust switching to oscillator for SAMA5D2 2017-09-14 16:02:44 -04:00