u-boot/arch/arm/cpu/armv7/omap5
Tom Rini 0a9e34056f gpio: omap: Drop 'method' parameter
The "method" parameter was part of the original port of the driver from
the kernel.  At some point this may have been added to allow for future
differentiation (as omap1 and omap2 have different GPIO IP blocks, so
this wasn't an unreasonable thing to do).  At this point however it's
just extra overhead, so drop.

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-12 20:48:06 -04:00
..
abb.c DRA7: add ABB setup for MPU voltage domain 2014-01-24 11:41:17 -05:00
boot.c omap5: Definitions for SYS_BOOT-based fallback boot device selection 2015-07-27 15:02:09 -04:00
config.mk kbuild: use shorten logs for mkimage rules 2014-02-25 11:01:29 -05:00
dra7xx_iodelay.c ARM: DRA7: Add support for manual mode configuration 2015-06-12 13:02:05 -04:00
emif.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
hw_data.c ARM: DRA7: Change configuration to prevent DDR reset control from EMIF 2015-06-19 16:46:48 -04:00
hwinit.c gpio: omap: Drop 'method' parameter 2015-08-12 20:48:06 -04:00
Kconfig arch: Make board selection choices optional 2015-05-12 18:10:02 -04:00
Makefile omap5: Definitions for SYS_BOOT-based fallback boot device selection 2015-07-27 15:02:09 -04:00
prcm-regs.c ARM: BeagleBoard-x15: Enable i2c5 clocks 2015-06-15 10:57:26 -04:00
sdram.c ARM: DRA7xx: EMIF: Fix DLL_CALIB_CTRL register 2015-06-12 12:43:07 -04:00