u-boot/arch/arm/cpu/armv7/omap-common
Paul Kocialkowski ed19bdaea3 omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot
OMAP devices might boot from peripheral devices, such as UART or USB.
When that happens, the U-Boot SPL tries to boot the next stage (complete U-Boot)
from that peripheral device, but in most cases, this is not a valid boot device.

This introduces a fallback option that reads the SYS_BOOT pins, that are used by
the bootrom to determine which device to boot from. It is intended for the
SYS_BOOT value to be interpreted in the memory-preferred scheme, so that the
U-Boot SPL can load the next stage from a valid location.

Practically, this options allows loading the U-Boot SPL through USB and have it
load the next stage according to the memory device selected by SYS_BOOT instead
of stalling.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-27 15:02:06 -04:00
..
abb.c replace DIV_ROUND with DIV_ROUND_CLOSEST 2014-11-20 11:28:25 -05:00
boot-common.c omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot 2015-07-27 15:02:06 -04:00
clocks-common.c am33xx: Re-enable SW levelling for DDR2 2015-06-15 10:57:26 -04:00
emif-common.c ARM: DRA7: emif: Fix DDR init sequence during warm reset 2015-06-15 10:57:27 -04:00
hwinit-common.c omap-common: Common boot code OMAP3 support and cleanup 2015-07-27 15:02:03 -04:00
lowlevel_init.S omap-common: Common boot code OMAP3 support and cleanup 2015-07-27 15:02:03 -04:00
Makefile omap-common: Common boot code OMAP3 support and cleanup 2015-07-27 15:02:03 -04:00
mem-common.c ARM: omap: clean redundant PISMO_xx macros used in OMAP3 2014-07-25 16:26:12 -04:00
omap-cache.c am33xx/omap: Allow cache enable for all Sitara/OMAP 2014-06-11 16:25:39 -04:00
pipe3-phy.c ARM: OMAP5: Add Pipe3 PHY driver 2013-12-04 08:12:08 -05:00
pipe3-phy.h ARM: OMAP5: Add Pipe3 PHY driver 2013-12-04 08:12:08 -05:00
reset.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
sata.c ahci: mmio_base is a virtual address 2015-04-18 16:54:29 -04:00
timer.c omap-common/hwinit-common.c: timer_init() doesn't need to touch gd 2015-01-05 15:13:45 -05:00
u-boot-spl.lds arm: Add missing .vectors section to linker scripts 2014-08-30 07:46:41 -04:00
utils.c ARM: DRA7: Set serial number environment variable 2015-04-23 13:59:19 -04:00
vc.c ARM: OMAP4+: pmic: Make generic bus init and write functions 2013-06-10 08:43:09 -04:00