u-boot/test/dm/nvmxip.c
Abdellatif El Khlifi 56722fafd9 sandbox64: add a test case for UCLASS_NVMXIP
provide a test for NVM XIP devices

The test case allows to make sure of the following:

- The NVM XIP QSPI devices are probed
- The DT entries are read correctly
- the data read from the flash by the NVMXIP block driver is correct

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
2023-04-27 17:01:15 -04:00

145 lines
4.1 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Functional tests for UCLASS_FFA class
*
* Copyright 2023 Arm Limited and/or its affiliates <open-source-office@arm.com>
*
* Authors:
* Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
*/
#include <common.h>
#include <blk.h>
#include <console.h>
#include <dm.h>
#include <mapmem.h>
#include <dm/test.h>
#include <linux/bitops.h>
#include <test/test.h>
#include <test/ut.h>
#include "../../drivers/mtd/nvmxip/nvmxip.h"
/* NVMXIP devices described in the device tree */
#define SANDBOX_NVMXIP_DEVICES 2
/* reference device tree data for the probed devices */
static struct nvmxip_plat nvmqspi_refdata[SANDBOX_NVMXIP_DEVICES] = {
{0x08000000, 9, 4096}, {0x08200000, 9, 2048}
};
#define NVMXIP_BLK_START_PATTERN 0x1122334455667788ULL
#define NVMXIP_BLK_END_PATTERN 0xa1a2a3a4a5a6a7a8ULL
/**
* dm_nvmxip_flash_sanity() - check flash data
* @uts: test state
* @device_idx: the NVMXIP device index
* @buffer: the user buffer where the blocks data is copied to
*
* Mode 1: When buffer is NULL, initialize the flash with pattern data at the start
* and at the end of each block. This pattern data will be used to check data consistency
* when verifying the data read.
* Mode 2: When the user buffer is provided in the argument (not NULL), compare the data
* of the start and the end of each block in the user buffer with the expected pattern data.
* Return an error when the check fails.
*
* Return:
*
* 0 on success. Otherwise, failure
*/
static int dm_nvmxip_flash_sanity(struct unit_test_state *uts, u8 device_idx, void *buffer)
{
int i;
u64 *ptr;
u8 *base;
unsigned long blksz;
blksz = BIT(nvmqspi_refdata[device_idx].lba_shift);
if (!buffer) {
/* Mode 1: point at the flash start address. Pattern data will be written */
base = map_sysmem(nvmqspi_refdata[device_idx].phys_base, 0);
} else {
/* Mode 2: point at the user buffer containing the data read and to be verified */
base = buffer;
}
for (i = 0; i < nvmqspi_refdata[device_idx].lba ; i++) {
ptr = (u64 *)(base + i * blksz);
/* write an 8 bytes pattern at the start of the current block */
if (!buffer)
*ptr = NVMXIP_BLK_START_PATTERN;
else
ut_asserteq_64(NVMXIP_BLK_START_PATTERN, *ptr);
ptr = (u64 *)((u8 *)ptr + blksz - sizeof(u64));
/* write an 8 bytes pattern at the end of the current block */
if (!buffer)
*ptr = NVMXIP_BLK_END_PATTERN;
else
ut_asserteq_64(NVMXIP_BLK_END_PATTERN, *ptr);
}
if (!buffer)
unmap_sysmem(base);
return 0;
}
/**
* dm_test_nvmxip() - check flash data
* @uts: test state
* Return:
*
* CMD_RET_SUCCESS on success. Otherwise, failure
*/
static int dm_test_nvmxip(struct unit_test_state *uts)
{
struct nvmxip_plat *plat_data = NULL;
struct udevice *dev = NULL, *bdev = NULL;
u8 device_idx;
void *buffer = NULL;
unsigned long flashsz;
/* set the flash content first for both devices */
dm_nvmxip_flash_sanity(uts, 0, NULL);
dm_nvmxip_flash_sanity(uts, 1, NULL);
/* probing all NVM XIP QSPI devices */
for (device_idx = 0, uclass_first_device(UCLASS_NVMXIP, &dev);
dev;
uclass_next_device(&dev), device_idx++) {
plat_data = dev_get_plat(dev);
/* device tree entries checks */
ut_assertok(nvmqspi_refdata[device_idx].phys_base != plat_data->phys_base);
ut_assertok(nvmqspi_refdata[device_idx].lba_shift != plat_data->lba_shift);
ut_assertok(nvmqspi_refdata[device_idx].lba != plat_data->lba);
/* before reading all the flash blocks, let's calculate the flash size */
flashsz = plat_data->lba << plat_data->lba_shift;
/* allocate the user buffer where to copy the blocks data to */
buffer = calloc(flashsz, 1);
ut_assertok(!buffer);
/* the block device is the child of the parent device probed with DT */
ut_assertok(device_find_first_child(dev, &bdev));
/* reading all the flash blocks */
ut_asserteq(plat_data->lba, blk_read(bdev, 0, plat_data->lba, buffer));
/* compare the data read from flash with the expected data */
dm_nvmxip_flash_sanity(uts, device_idx, buffer);
free(buffer);
}
ut_assertok(device_idx != SANDBOX_NVMXIP_DEVICES);
return CMD_RET_SUCCESS;
}
DM_TEST(dm_test_nvmxip, UT_TESTF_SCAN_FDT | UT_TESTF_CONSOLE_REC);