u-boot/arch/powerpc/dts/kmsupm5.dts
Heiko Schocher 7bdfe85929 mpc83xx, keymile boards: enable DM_ETH and add DTS
enable DTS support for keymile mpc83xx based boards.

get rid of compile warning:
===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Therefore done:
- add DTS for all mpc83xx based boards from keymile
  mainly they are not mainlined to linux.
- add u-boot specific dtsi
- add stdout-path
- add missing ucc4 par_io definitions, which were
  in board code, but not in linux DTS
- remove not used ethernet nodes

Signed-off-by: Heiko Schocher <hs@denx.de>
Patch-cc: Mario Six <mario.six@gdsys.cc>
Patch-cc: Qiang Zhao <qiang.zhao@nxp.com>

Series-to: u-boot

Series-version: 3

Series-changes: 3
- rebase patchset to current mainline commit
  c0192950df
- update defconfig files

Series-changes: 2
- add patch which fixes Codingstyle errors in drivers/qe
- add patch which converts the mpc83xx based boards from
  keymile to DM_ETH

Cover-letter:
powerpc, mpc83xx: add DM_ETH support

This patch series adds DM ethernet support for mpc83xx based
keymile boards.

Travis build:

END
2020-09-17 06:09:54 +02:00

129 lines
2.5 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* ABB PGGA SUPM5 Device Tree Source
*
* Copyright (C) 2020 Heiko Schocher <hs@denx.de>
*
*/
/dts-v1/;
#include "km8321.dtsi"
/ {
model = "SUPM5";
compatible = "ABB,kmpbec8321";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet_piggy2;
serial0 = &serial0;
};
};
&i2c0 {
mux@70 {
compatible = "nxp,pca9547";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
/* Inventory EEPROM of the unit itself */
ivm@50 {
label = "MAIN_CTRL";
compatible = "dummy";
reg = <0x50>;
};
};
i2c@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
/* Temperature sensors */
temp@49 {
label = "board";
compatible = "national,lm75";
reg = <0x49>;
};
};
};
};
&par_io {
/* UCC5 as HDLC controller for ICN */
pio_ucc5: ucc_pin@04 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
2 0 1 0 2 0 /* TxD0 */
2 8 2 0 2 0 /* RxD0 */
2 29 2 0 2 0 /* CTS */
3 30 2 0 1 0 /* ICN CLK */
>;
};
/* UCC4 Piggy Ethernet */
pio_ucc4: ucc_pin@03 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
3 4 3 0 2 0 /* MDIO */
3 5 1 0 2 0 /* MDC */
1 18 1 0 1 0 /* TxD0 */
1 19 1 0 1 0 /* TxD1 */
1 22 2 0 1 0 /* RxD0 */
1 23 2 0 1 0 /* RxD1 */
1 26 2 0 1 0 /* RX_ER */
1 28 2 0 1 0 /* RX_DV */
1 30 1 0 1 0 /* TX_EN */
1 31 2 0 1 0 /* CRS */
3 10 2 0 3 0 /* UCC4_RMII_CLK (CLK17) */
>;
};
pio_spi: spi_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
3 0 3 0 1 0 /* SPI_MOSI (PD0, bi, f3) */
3 1 3 0 1 0 /* SPI_MISO (PD1, bi, f3) */
3 2 3 0 1 0 /* SPI_CLK (PD2, bi, f3) */
>;
};
};
&localbus {
ranges = <0 0 0xf0000000 0x04000000 /* LB 0 Flash (boot) */
1 0 0xe8000000 0x01000000 /* LB 1 PRIO1 and Piggy */
2 0 0xa0000000 0x10000000>; /* LB 2 LPXF */
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0x00000000 0x04000000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 { /* 768KB */
label = "u-boot";
reg = <0 0xC0000>;
};
partition@c0000 { /* 128KB */
label = "env";
reg = <0xc0000 0x20000>;
};
partition@e0000 { /* 128KB */
label = "envred";
reg = <0xe0000 0x20000>;
};
partition@100000 { /* 64512KB */
label = "ubi0";
reg = <0x100000 0x3F00000>;
};
};
};