mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
e895a4b06f
This function can fail if the device tree runs out of space. Rather than silently booting with an incomplete device tree, allow the failure to be detected. Unfortunately this involves changing a lot of places in the code. I have not changed behvaiour to return an error where one is not currently returned, to avoid unexpected breakage. Eventually it would be nice to allow boards to register functions to be called to update the device tree. This would avoid all the many functions to do this. However it's not clear yet if this should be done using driver model or with a linker list. This work is left for later. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| mpc8323erdb.c | ||
| README | ||
Freescale MPC8323ERDB Board ----------------------------------------- 1. Memory Map The memory map looks like this: 0x0000_0000 0x03ff_ffff DDR 64M 0x8000_0000 0x8fff_ffff PCI MEM 256M 0x9000_0000 0x9fff_ffff PCI_MMIO 256M 0xe000_0000 0xe00f_ffff IMMR 1M 0xd000_0000 0xd3ff_ffff PCI IO 64M 0xfe00_0000 0xfeff_ffff NOR FLASH (CS0) 16M 2. Compilation Assuming you're using BASH (or similar) as your shell: export CROSS_COMPILE=your-cross-compiler-prefix- make distclean make MPC8323ERDB_config make 3. Downloading and Flashing Images 3.1 Reflash U-boot Image using U-boot N.b, have an alternate means of programming the flash available if the new u-boot doesn't boot. First try a: tftpboot $loadaddr $uboot to make sure that the TFTP load will succeed before an erase goes ahead and wipes out your current firmware. Then do a: run tftpflash which is a shorter version of the manual sequence: tftp $loadaddr u-boot.bin protect off fe000000 +$filesize erase fe000000 +$filesize cp.b $loadaddr fe000000 $filesize To keep your old u-boot's environment variables, do a: saveenv prior to resetting the board. 3.2 Downloading and Booting Linux Kernel Ensure that all networking-related environment variables are set properly (including ipaddr, serverip, gatewayip (if needed), netmask, ethaddr, eth1addr, rootpath (if using NFS root), fdtfile, and bootfile). Then, do one of the following, depending on whether you want an NFS root or a ramdisk root: run nfsboot or run ramboot 4 Notes The console baudrate for MPC8323ERDB is 115200bps.