u-boot/common/cmd_nand.c
Wolfgang Denk a89c33db96 General help message cleanup
Many of the help messages were not really helpful; for example, many
commands that take no arguments would not print a correct synopsis
line, but "No additional help available." which is not exactly wrong,
but not helpful either.

Commit ``Make "usage" messages more helpful.'' changed this
partially. But it also became clear that lots of "Usage" and "Help"
messages (fields "usage" and "help" in struct cmd_tbl_s respective)
were actually redundant.

This patch cleans this up - for example:

Before:
	=> help dtt
	dtt - Digital Thermometer and Thermostat

	Usage:
	dtt         - Read temperature from digital thermometer and thermostat.

After:
	=> help dtt
	dtt - Read temperature from Digital Thermometer and Thermostat

	Usage:
	dtt

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-06-12 20:47:16 +02:00

1090 lines
26 KiB
C

/*
* Driver for NAND support, Rick Bronson
* borrowed heavily from:
* (c) 1999 Machine Vision Holdings, Inc.
* (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
*
* Added 16-bit nand support
* (C) 2004 Texas Instruments
*/
#include <common.h>
#ifndef CONFIG_NAND_LEGACY
/*
*
* New NAND support
*
*/
#include <common.h>
#include <linux/mtd/mtd.h>
#if defined(CONFIG_CMD_NAND)
#include <command.h>
#include <watchdog.h>
#include <malloc.h>
#include <asm/byteorder.h>
#include <jffs2/jffs2.h>
#include <nand.h>
#if defined(CONFIG_CMD_MTDPARTS)
/* parition handling routines */
int mtdparts_init(void);
int id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num);
int find_dev_and_part(const char *id, struct mtd_device **dev,
u8 *part_num, struct part_info **part);
#endif
static int nand_dump(nand_info_t *nand, ulong off, int only_oob)
{
int i;
u_char *datbuf, *oobbuf, *p;
datbuf = malloc(nand->writesize + nand->oobsize);
oobbuf = malloc(nand->oobsize);
if (!datbuf || !oobbuf) {
puts("No memory for page buffer\n");
return 1;
}
off &= ~(nand->writesize - 1);
loff_t addr = (loff_t) off;
struct mtd_oob_ops ops;
memset(&ops, 0, sizeof(ops));
ops.datbuf = datbuf;
ops.oobbuf = oobbuf; /* must exist, but oob data will be appended to ops.datbuf */
ops.len = nand->writesize;
ops.ooblen = nand->oobsize;
ops.mode = MTD_OOB_RAW;
i = nand->read_oob(nand, addr, &ops);
if (i < 0) {
printf("Error (%d) reading page %08lx\n", i, off);
free(datbuf);
free(oobbuf);
return 1;
}
printf("Page %08lx dump:\n", off);
i = nand->writesize >> 4;
p = datbuf;
while (i--) {
if (!only_oob)
printf("\t%02x %02x %02x %02x %02x %02x %02x %02x"
" %02x %02x %02x %02x %02x %02x %02x %02x\n",
p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],
p[8], p[9], p[10], p[11], p[12], p[13], p[14],
p[15]);
p += 16;
}
puts("OOB:\n");
i = nand->oobsize >> 3;
while (i--) {
printf("\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
p += 8;
}
free(datbuf);
free(oobbuf);
return 0;
}
/* ------------------------------------------------------------------------- */
static inline int str2long(char *p, ulong *num)
{
char *endptr;
*num = simple_strtoul(p, &endptr, 16);
return (*p != '\0' && *endptr == '\0') ? 1 : 0;
}
static int
arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, size_t *size)
{
int idx = nand_curr_device;
#if defined(CONFIG_CMD_MTDPARTS)
struct mtd_device *dev;
struct part_info *part;
u8 pnum;
if (argc >= 1 && !(str2long(argv[0], off))) {
if ((mtdparts_init() == 0) &&
(find_dev_and_part(argv[0], &dev, &pnum, &part) == 0)) {
if (dev->id->type != MTD_DEV_TYPE_NAND) {
puts("not a NAND device\n");
return -1;
}
*off = part->offset;
if (argc >= 2) {
if (!(str2long(argv[1], (ulong *)size))) {
printf("'%s' is not a number\n", argv[1]);
return -1;
}
if (*size > part->size)
*size = part->size;
} else {
*size = part->size;
}
idx = dev->id->num;
*nand = nand_info[idx];
goto out;
}
}
#endif
if (argc >= 1) {
if (!(str2long(argv[0], off))) {
printf("'%s' is not a number\n", argv[0]);
return -1;
}
} else {
*off = 0;
}
if (argc >= 2) {
if (!(str2long(argv[1], (ulong *)size))) {
printf("'%s' is not a number\n", argv[1]);
return -1;
}
} else {
*size = nand->size - *off;
}
#if defined(CONFIG_CMD_MTDPARTS)
out:
#endif
printf("device %d ", idx);
if (*size == nand->size)
puts("whole chip\n");
else
printf("offset 0x%lx, size 0x%zx\n", *off, *size);
return 0;
}
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
static void print_status(ulong start, ulong end, ulong erasesize, int status)
{
printf("%08lx - %08lx: %08lx blocks %s%s%s\n",
start,
end - 1,
(end - start) / erasesize,
((status & NAND_LOCK_STATUS_TIGHT) ? "TIGHT " : ""),
((status & NAND_LOCK_STATUS_LOCK) ? "LOCK " : ""),
((status & NAND_LOCK_STATUS_UNLOCK) ? "UNLOCK " : ""));
}
static void do_nand_status(nand_info_t *nand)
{
ulong block_start = 0;
ulong off;
int last_status = -1;
struct nand_chip *nand_chip = nand->priv;
/* check the WP bit */
nand_chip->cmdfunc(nand, NAND_CMD_STATUS, -1, -1);
printf("device is %swrite protected\n",
(nand_chip->read_byte(nand) & 0x80 ?
"NOT " : ""));
for (off = 0; off < nand->size; off += nand->erasesize) {
int s = nand_get_lock_status(nand, off);
/* print message only if status has changed */
if (s != last_status && off != 0) {
print_status(block_start, off, nand->erasesize,
last_status);
block_start = off;
}
last_status = s;
}
/* Print the last block info */
print_status(block_start, off, nand->erasesize, last_status);
}
#endif
static void nand_print_info(int idx)
{
nand_info_t *nand = &nand_info[idx];
struct nand_chip *chip = nand->priv;
printf("Device %d: ", idx);
if (chip->numchips > 1)
printf("%dx ", chip->numchips);
printf("%s, sector size %u KiB\n",
nand->name, nand->erasesize >> 10);
}
int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
int i, dev, ret = 0;
ulong addr, off;
size_t size;
char *cmd, *s;
nand_info_t *nand;
#ifdef CONFIG_SYS_NAND_QUIET
int quiet = CONFIG_SYS_NAND_QUIET;
#else
int quiet = 0;
#endif
const char *quiet_str = getenv("quiet");
/* at least two arguments please */
if (argc < 2)
goto usage;
if (quiet_str)
quiet = simple_strtoul(quiet_str, NULL, 0) != 0;
cmd = argv[1];
if (strcmp(cmd, "info") == 0) {
putc('\n');
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
if (nand_info[i].name)
nand_print_info(i);
}
return 0;
}
if (strcmp(cmd, "device") == 0) {
if (argc < 3) {
putc('\n');
if ((nand_curr_device < 0) ||
(nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE))
puts("no devices available\n");
else
nand_print_info(nand_curr_device);
return 0;
}
dev = (int)simple_strtoul(argv[2], NULL, 10);
if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev].name) {
puts("No such device\n");
return 1;
}
printf("Device %d: %s", dev, nand_info[dev].name);
puts("... is now current device\n");
nand_curr_device = dev;
#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
/*
* Select the chip in the board/cpu specific driver
*/
board_nand_select_device(nand_info[dev].priv, dev);
#endif
return 0;
}
if (strcmp(cmd, "bad") != 0 && strcmp(cmd, "erase") != 0 &&
strncmp(cmd, "dump", 4) != 0 &&
strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 &&
strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 &&
strcmp(cmd, "biterr") != 0 &&
strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 )
goto usage;
/* the following commands operate on the current device */
if (nand_curr_device < 0 || nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
!nand_info[nand_curr_device].name) {
puts("\nno devices available\n");
return 1;
}
nand = &nand_info[nand_curr_device];
if (strcmp(cmd, "bad") == 0) {
printf("\nDevice %d bad blocks:\n", nand_curr_device);
for (off = 0; off < nand->size; off += nand->erasesize)
if (nand_block_isbad(nand, off))
printf(" %08lx\n", off);
return 0;
}
/*
* Syntax is:
* 0 1 2 3 4
* nand erase [clean] [off size]
*/
if (strcmp(cmd, "erase") == 0 || strcmp(cmd, "scrub") == 0) {
nand_erase_options_t opts;
/* "clean" at index 2 means request to write cleanmarker */
int clean = argc > 2 && !strcmp("clean", argv[2]);
int o = clean ? 3 : 2;
int scrub = !strcmp(cmd, "scrub");
printf("\nNAND %s: ", scrub ? "scrub" : "erase");
/* skip first two or three arguments, look for offset and size */
if (arg_off_size(argc - o, argv + o, nand, &off, &size) != 0)
return 1;
memset(&opts, 0, sizeof(opts));
opts.offset = off;
opts.length = size;
opts.jffs2 = clean;
opts.quiet = quiet;
if (scrub) {
puts("Warning: "
"scrub option will erase all factory set "
"bad blocks!\n"
" "
"There is no reliable way to recover them.\n"
" "
"Use this command only for testing purposes "
"if you\n"
" "
"are sure of what you are doing!\n"
"\nReally scrub this NAND flash? <y/N>\n");
if (getc() == 'y' && getc() == '\r') {
opts.scrub = 1;
} else {
puts("scrub aborted\n");
return -1;
}
}
ret = nand_erase_opts(nand, &opts);
printf("%s\n", ret ? "ERROR" : "OK");
return ret == 0 ? 0 : 1;
}
if (strncmp(cmd, "dump", 4) == 0) {
if (argc < 3)
goto usage;
s = strchr(cmd, '.');
off = (int)simple_strtoul(argv[2], NULL, 16);
if (s != NULL && strcmp(s, ".oob") == 0)
ret = nand_dump(nand, off, 1);
else
ret = nand_dump(nand, off, 0);
return ret == 0 ? 1 : 0;
}
if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
int read;
if (argc < 4)
goto usage;
addr = (ulong)simple_strtoul(argv[2], NULL, 16);
read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
printf("\nNAND %s: ", read ? "read" : "write");
if (arg_off_size(argc - 3, argv + 3, nand, &off, &size) != 0)
return 1;
s = strchr(cmd, '.');
if (!s || !strcmp(s, ".jffs2") ||
!strcmp(s, ".e") || !strcmp(s, ".i")) {
if (read)
ret = nand_read_skip_bad(nand, off, &size,
(u_char *)addr);
else
ret = nand_write_skip_bad(nand, off, &size,
(u_char *)addr);
} else if (!strcmp(s, ".oob")) {
/* out-of-band data */
mtd_oob_ops_t ops = {
.oobbuf = (u8 *)addr,
.ooblen = size,
.mode = MTD_OOB_RAW
};
if (read)
ret = nand->read_oob(nand, off, &ops);
else
ret = nand->write_oob(nand, off, &ops);
} else {
printf("Unknown nand command suffix '%s'.\n", s);
return 1;
}
printf(" %zu bytes %s: %s\n", size,
read ? "read" : "written", ret ? "ERROR" : "OK");
return ret == 0 ? 0 : 1;
}
if (strcmp(cmd, "markbad") == 0) {
addr = (ulong)simple_strtoul(argv[2], NULL, 16);
int ret = nand->block_markbad(nand, addr);
if (ret == 0) {
printf("block 0x%08lx successfully marked as bad\n",
(ulong) addr);
return 0;
} else {
printf("block 0x%08lx NOT marked as bad! ERROR %d\n",
(ulong) addr, ret);
}
return 1;
}
if (strcmp(cmd, "biterr") == 0) {
/* todo */
return 1;
}
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
if (strcmp(cmd, "lock") == 0) {
int tight = 0;
int status = 0;
if (argc == 3) {
if (!strcmp("tight", argv[2]))
tight = 1;
if (!strcmp("status", argv[2]))
status = 1;
}
if (status) {
do_nand_status(nand);
} else {
if (!nand_lock(nand, tight)) {
puts("NAND flash successfully locked\n");
} else {
puts("Error locking NAND flash\n");
return 1;
}
}
return 0;
}
if (strcmp(cmd, "unlock") == 0) {
if (arg_off_size(argc - 2, argv + 2, nand, &off, &size) < 0)
return 1;
if (!nand_unlock(nand, off, size)) {
puts("NAND flash successfully unlocked\n");
} else {
puts("Error unlocking NAND flash, "
"write and erase will probably fail\n");
return 1;
}
return 0;
}
#endif
usage:
cmd_usage(cmdtp);
return 1;
}
U_BOOT_CMD(nand, CONFIG_SYS_MAXARGS, 1, do_nand,
"NAND sub-system",
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
"nand read - addr off|partition size\n"
"nand write - addr off|partition size\n"
" read/write 'size' bytes starting at offset 'off'\n"
" to/from memory address 'addr', skipping bad blocks.\n"
"nand erase [clean] [off size] - erase 'size' bytes from\n"
" offset 'off' (entire device if not specified)\n"
"nand bad - show bad blocks\n"
"nand dump[.oob] off - dump page\n"
"nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
"nand markbad off [...] - mark bad block(s) at offset (UNSAFE)\n"
"nand biterr off - make a bit error at offset (UNSAFE)"
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
"\n"
"nand lock [tight] [status]\n"
" bring nand to lock state or display locked pages\n"
"nand unlock [offset] [size] - unlock section"
#endif
);
static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
ulong offset, ulong addr, char *cmd)
{
int r;
char *ep, *s;
size_t cnt;
image_header_t *hdr;
#if defined(CONFIG_FIT)
const void *fit_hdr = NULL;
#endif
s = strchr(cmd, '.');
if (s != NULL &&
(strcmp(s, ".jffs2") && strcmp(s, ".e") && strcmp(s, ".i"))) {
printf("Unknown nand load suffix '%s'\n", s);
show_boot_progress(-53);
return 1;
}
printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset);
cnt = nand->writesize;
r = nand_read_skip_bad(nand, offset, &cnt, (u_char *) addr);
if (r) {
puts("** Read error\n");
show_boot_progress (-56);
return 1;
}
show_boot_progress (56);
switch (genimg_get_format ((void *)addr)) {
case IMAGE_FORMAT_LEGACY:
hdr = (image_header_t *)addr;
show_boot_progress (57);
image_print_contents (hdr);
cnt = image_get_image_size (hdr);
break;
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
fit_hdr = (const void *)addr;
puts ("Fit image detected...\n");
cnt = fit_get_size (fit_hdr);
break;
#endif
default:
show_boot_progress (-57);
puts ("** Unknown image type\n");
return 1;
}
show_boot_progress (57);
r = nand_read_skip_bad(nand, offset, &cnt, (u_char *) addr);
if (r) {
puts("** Read error\n");
show_boot_progress (-58);
return 1;
}
show_boot_progress (58);
#if defined(CONFIG_FIT)
/* This cannot be done earlier, we need complete FIT image in RAM first */
if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT) {
if (!fit_check_format (fit_hdr)) {
show_boot_progress (-150);
puts ("** Bad FIT image format\n");
return 1;
}
show_boot_progress (151);
fit_print_contents (fit_hdr);
}
#endif
/* Loading ok, update default load address */
load_addr = addr;
/* Check if we should attempt an auto-start */
if (((ep = getenv("autostart")) != NULL) && (strcmp(ep, "yes") == 0)) {
char *local_args[2];
extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
local_args[0] = cmd;
local_args[1] = NULL;
printf("Automatic boot of image at addr 0x%08lx ...\n", addr);
do_bootm(cmdtp, 0, 1, local_args);
return 1;
}
return 0;
}
int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
char *boot_device = NULL;
int idx;
ulong addr, offset = 0;
#if defined(CONFIG_CMD_MTDPARTS)
struct mtd_device *dev;
struct part_info *part;
u8 pnum;
if (argc >= 2) {
char *p = (argc == 2) ? argv[1] : argv[2];
if (!(str2long(p, &addr)) && (mtdparts_init() == 0) &&
(find_dev_and_part(p, &dev, &pnum, &part) == 0)) {
if (dev->id->type != MTD_DEV_TYPE_NAND) {
puts("Not a NAND device\n");
return 1;
}
if (argc > 3)
goto usage;
if (argc == 3)
addr = simple_strtoul(argv[1], NULL, 16);
else
addr = CONFIG_SYS_LOAD_ADDR;
return nand_load_image(cmdtp, &nand_info[dev->id->num],
part->offset, addr, argv[0]);
}
}
#endif
show_boot_progress(52);
switch (argc) {
case 1:
addr = CONFIG_SYS_LOAD_ADDR;
boot_device = getenv("bootdevice");
break;
case 2:
addr = simple_strtoul(argv[1], NULL, 16);
boot_device = getenv("bootdevice");
break;
case 3:
addr = simple_strtoul(argv[1], NULL, 16);
boot_device = argv[2];
break;
case 4:
addr = simple_strtoul(argv[1], NULL, 16);
boot_device = argv[2];
offset = simple_strtoul(argv[3], NULL, 16);
break;
default:
#if defined(CONFIG_CMD_MTDPARTS)
usage:
#endif
cmd_usage(cmdtp);
show_boot_progress(-53);
return 1;
}
show_boot_progress(53);
if (!boot_device) {
puts("\n** No boot device **\n");
show_boot_progress(-54);
return 1;
}
show_boot_progress(54);
idx = simple_strtoul(boot_device, NULL, 16);
if (idx < 0 || idx >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[idx].name) {
printf("\n** Device %d not available\n", idx);
show_boot_progress(-55);
return 1;
}
show_boot_progress(55);
return nand_load_image(cmdtp, &nand_info[idx], offset, addr, argv[0]);
}
U_BOOT_CMD(nboot, 4, 1, do_nandboot,
"boot from NAND device",
"[partition] | [[[loadAddr] dev] offset]"
);
#endif
#else /* CONFIG_NAND_LEGACY */
/*
*
* Legacy NAND support - to be phased out
*
*/
#include <command.h>
#include <malloc.h>
#include <asm/io.h>
#include <watchdog.h>
#ifdef CONFIG_show_boot_progress
# include <status_led.h>
# define show_boot_progress(arg) show_boot_progress(arg)
#else
# define show_boot_progress(arg)
#endif
#if defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand_legacy.h>
#if 0
#include <linux/mtd/nand_ids.h>
#include <jffs2/jffs2.h>
#endif
#ifdef CONFIG_OMAP1510
void archflashwp(void *archdata, int wp);
#endif
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
#undef NAND_DEBUG
#undef PSYCHO_DEBUG
/* ****************** WARNING *********************
* When ALLOW_ERASE_BAD_DEBUG is non-zero the erase command will
* erase (or at least attempt to erase) blocks that are marked
* bad. This can be very handy if you are _sure_ that the block
* is OK, say because you marked a good block bad to test bad
* block handling and you are done testing, or if you have
* accidentally marked blocks bad.
*
* Erasing factory marked bad blocks is a _bad_ idea. If the
* erase succeeds there is no reliable way to find them again,
* and attempting to program or erase bad blocks can affect
* the data in _other_ (good) blocks.
*/
#define ALLOW_ERASE_BAD_DEBUG 0
#define CONFIG_MTD_NAND_ECC /* enable ECC */
#define CONFIG_MTD_NAND_ECC_JFFS2
/* bits for nand_legacy_rw() `cmd'; or together as needed */
#define NANDRW_READ 0x01
#define NANDRW_WRITE 0x00
#define NANDRW_JFFS2 0x02
#define NANDRW_JFFS2_SKIP 0x04
/*
* Imports from nand_legacy.c
*/
extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
extern int curr_device;
extern int nand_legacy_erase(struct nand_chip *nand, size_t ofs,
size_t len, int clean);
extern int nand_legacy_rw(struct nand_chip *nand, int cmd, size_t start,
size_t len, size_t *retlen, u_char *buf);
extern void nand_print(struct nand_chip *nand);
extern void nand_print_bad(struct nand_chip *nand);
extern int nand_read_oob(struct nand_chip *nand, size_t ofs,
size_t len, size_t *retlen, u_char *buf);
extern int nand_write_oob(struct nand_chip *nand, size_t ofs,
size_t len, size_t *retlen, const u_char *buf);
int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
int rcode = 0;
switch (argc) {
case 0:
case 1:
cmd_usage(cmdtp);
return 1;
case 2:
if (strcmp (argv[1], "info") == 0) {
int i;
putc ('\n');
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; ++i) {
if (nand_dev_desc[i].ChipID ==
NAND_ChipID_UNKNOWN)
continue; /* list only known devices */
printf ("Device %d: ", i);
nand_print (&nand_dev_desc[i]);
}
return 0;
} else if (strcmp (argv[1], "device") == 0) {
if ((curr_device < 0)
|| (curr_device >= CONFIG_SYS_MAX_NAND_DEVICE)) {
puts ("\nno devices available\n");
return 1;
}
printf ("\nDevice %d: ", curr_device);
nand_print (&nand_dev_desc[curr_device]);
return 0;
} else if (strcmp (argv[1], "bad") == 0) {
if ((curr_device < 0)
|| (curr_device >= CONFIG_SYS_MAX_NAND_DEVICE)) {
puts ("\nno devices available\n");
return 1;
}
printf ("\nDevice %d bad blocks:\n", curr_device);
nand_print_bad (&nand_dev_desc[curr_device]);
return 0;
}
cmd_usage(cmdtp);
return 1;
case 3:
if (strcmp (argv[1], "device") == 0) {
int dev = (int) simple_strtoul (argv[2], NULL, 10);
printf ("\nDevice %d: ", dev);
if (dev >= CONFIG_SYS_MAX_NAND_DEVICE) {
puts ("unknown device\n");
return 1;
}
nand_print (&nand_dev_desc[dev]);
/*nand_print (dev); */
if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) {
return 1;
}
curr_device = dev;
puts ("... is now current device\n");
return 0;
} else if (strcmp (argv[1], "erase") == 0
&& strcmp (argv[2], "clean") == 0) {
struct nand_chip *nand = &nand_dev_desc[curr_device];
ulong off = 0;
ulong size = nand->totlen;
int ret;
printf ("\nNAND erase: device %d offset %ld, size %ld ... ", curr_device, off, size);
ret = nand_legacy_erase (nand, off, size, 1);
printf ("%s\n", ret ? "ERROR" : "OK");
return ret;
}
cmd_usage(cmdtp);
return 1;
default:
/* at least 4 args */
if (strncmp (argv[1], "read", 4) == 0 ||
strncmp (argv[1], "write", 5) == 0) {
ulong addr = simple_strtoul (argv[2], NULL, 16);
off_t off = simple_strtoul (argv[3], NULL, 16);
size_t size = simple_strtoul (argv[4], NULL, 16);
int cmd = (strncmp (argv[1], "read", 4) == 0) ?
NANDRW_READ : NANDRW_WRITE;
size_t total;
int ret;
char *cmdtail = strchr (argv[1], '.');
if (cmdtail && !strncmp (cmdtail, ".oob", 2)) {
/* read out-of-band data */
if (cmd & NANDRW_READ) {
ret = nand_read_oob (nand_dev_desc + curr_device,
off, size, &total,
(u_char *) addr);
} else {
ret = nand_write_oob (nand_dev_desc + curr_device,
off, size, &total,
(u_char *) addr);
}
return ret;
} else if (cmdtail && !strncmp (cmdtail, ".jffs2s", 7)) {
cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
if (cmd & NANDRW_READ)
cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
} else if (cmdtail && !strncmp (cmdtail, ".jffs2", 2))
cmd |= NANDRW_JFFS2; /* skip bad blocks */
#ifdef SXNI855T
/* need ".e" same as ".j" for compatibility with older units */
else if (cmdtail && !strcmp (cmdtail, ".e"))
cmd |= NANDRW_JFFS2; /* skip bad blocks */
#endif
#ifdef CONFIG_SYS_NAND_SKIP_BAD_DOT_I
/* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
/* ".i" for image -> read skips bad block (no 0xff) */
else if (cmdtail && !strcmp (cmdtail, ".i")) {
cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
if (cmd & NANDRW_READ)
cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
}
#endif /* CONFIG_SYS_NAND_SKIP_BAD_DOT_I */
else if (cmdtail) {
cmd_usage(cmdtp);
return 1;
}
printf ("\nNAND %s: device %d offset %ld, size %lu ...\n",
(cmd & NANDRW_READ) ? "read" : "write",
curr_device, off, (ulong)size);
ret = nand_legacy_rw (nand_dev_desc + curr_device,
cmd, off, size,
&total, (u_char *) addr);
printf (" %d bytes %s: %s\n", total,
(cmd & NANDRW_READ) ? "read" : "written",
ret ? "ERROR" : "OK");
return ret;
} else if (strcmp (argv[1], "erase") == 0 &&
(argc == 4 || strcmp ("clean", argv[2]) == 0)) {
int clean = argc == 5;
ulong off =
simple_strtoul (argv[2 + clean], NULL, 16);
ulong size =
simple_strtoul (argv[3 + clean], NULL, 16);
int ret;
printf ("\nNAND erase: device %d offset %ld, size %ld ...\n",
curr_device, off, size);
ret = nand_legacy_erase (nand_dev_desc + curr_device,
off, size, clean);
printf ("%s\n", ret ? "ERROR" : "OK");
return ret;
} else {
cmd_usage(cmdtp);
rcode = 1;
}
return rcode;
}
}
U_BOOT_CMD(
nand, 5, 1, do_nand,
"legacy NAND sub-system",
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
"nand read[.jffs2[s]] addr off size\n"
"nand write[.jffs2] addr off size - read/write `size' bytes starting\n"
" at offset `off' to/from memory address `addr'\n"
"nand erase [clean] [off size] - erase `size' bytes from\n"
" offset `off' (entire device if not specified)\n"
"nand bad - show bad blocks\n"
"nand read.oob addr off size - read out-of-band data\n"
"nand write.oob addr off size - read out-of-band data"
);
int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *boot_device = NULL;
char *ep;
int dev;
ulong cnt;
ulong addr;
ulong offset = 0;
image_header_t *hdr;
int rcode = 0;
#if defined(CONFIG_FIT)
const void *fit_hdr = NULL;
#endif
show_boot_progress (52);
switch (argc) {
case 1:
addr = CONFIG_SYS_LOAD_ADDR;
boot_device = getenv ("bootdevice");
break;
case 2:
addr = simple_strtoul(argv[1], NULL, 16);
boot_device = getenv ("bootdevice");
break;
case 3:
addr = simple_strtoul(argv[1], NULL, 16);
boot_device = argv[2];
break;
case 4:
addr = simple_strtoul(argv[1], NULL, 16);
boot_device = argv[2];
offset = simple_strtoul(argv[3], NULL, 16);
break;
default:
cmd_usage(cmdtp);
show_boot_progress (-53);
return 1;
}
show_boot_progress (53);
if (!boot_device) {
puts ("\n** No boot device **\n");
show_boot_progress (-54);
return 1;
}
show_boot_progress (54);
dev = simple_strtoul(boot_device, &ep, 16);
if ((dev >= CONFIG_SYS_MAX_NAND_DEVICE) ||
(nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) {
printf ("\n** Device %d not available\n", dev);
show_boot_progress (-55);
return 1;
}
show_boot_progress (55);
printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n",
dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR,
offset);
if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset,
SECTORSIZE, NULL, (u_char *)addr)) {
printf ("** Read error on %d\n", dev);
show_boot_progress (-56);
return 1;
}
show_boot_progress (56);
switch (genimg_get_format ((void *)addr)) {
case IMAGE_FORMAT_LEGACY:
hdr = (image_header_t *)addr;
image_print_contents (hdr);
cnt = image_get_image_size (hdr);
cnt -= SECTORSIZE;
break;
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
fit_hdr = (const void *)addr;
puts ("Fit image detected...\n");
cnt = fit_get_size (fit_hdr);
break;
#endif
default:
show_boot_progress (-57);
puts ("** Unknown image type\n");
return 1;
}
show_boot_progress (57);
if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ,
offset + SECTORSIZE, cnt, NULL,
(u_char *)(addr+SECTORSIZE))) {
printf ("** Read error on %d\n", dev);
show_boot_progress (-58);
return 1;
}
show_boot_progress (58);
#if defined(CONFIG_FIT)
/* This cannot be done earlier, we need complete FIT image in RAM first */
if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT) {
if (!fit_check_format (fit_hdr)) {
show_boot_progress (-150);
puts ("** Bad FIT image format\n");
return 1;
}
show_boot_progress (151);
fit_print_contents (fit_hdr);
}
#endif
/* Loading ok, update default load address */
load_addr = addr;
/* Check if we should attempt an auto-start */
if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) {
char *local_args[2];
extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
local_args[0] = argv[0];
local_args[1] = NULL;
printf ("Automatic boot of image at addr 0x%08lx ...\n", addr);
do_bootm (cmdtp, 0, 1, local_args);
rcode = 1;
}
return rcode;
}
U_BOOT_CMD(
nboot, 4, 1, do_nandboot,
"boot from NAND device",
"loadAddr dev"
);
#endif
#endif /* CONFIG_NAND_LEGACY */