u-boot/board/st/stm32f429-discovery/stm32f429-discovery.c
kunhuahuang 60570df19c stm32f4: add serial print port
Add the stm32F4 board's serial ports support.
User can use it easily.
The user only need to edit the number of the usart.
The patch also fix the serial print out.

Last, this version of patch fix the first patch checkpatch.pl error.
Thanks to Kamil Lulko.

Signed-off-by: kunhuahuang <huangkunhua@gmail.com>
2015-05-10 07:29:38 -04:00

287 lines
7.8 KiB
C

/*
* (C) Copyright 2011, 2012, 2013
* Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
* Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com
* Vladimir Khusainov, Emcraft Systems, vlad@emcraft.com
* Pavel Boldin, Emcraft Systems, paboldin@emcraft.com
*
* (C) Copyright 2015
* Kamil Lulko, <rev13@wp.pl>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/armv7m.h>
#include <asm/arch/stm32.h>
#include <asm/arch/gpio.h>
#include <asm/arch/fmc.h>
DECLARE_GLOBAL_DATA_PTR;
const struct stm32_gpio_ctl gpio_ctl_gpout = {
.mode = STM32_GPIO_MODE_OUT,
.otype = STM32_GPIO_OTYPE_PP,
.speed = STM32_GPIO_SPEED_50M,
.pupd = STM32_GPIO_PUPD_NO,
.af = STM32_GPIO_AF0
};
const struct stm32_gpio_ctl gpio_ctl_usart = {
.mode = STM32_GPIO_MODE_AF,
.otype = STM32_GPIO_OTYPE_PP,
.speed = STM32_GPIO_SPEED_50M,
.pupd = STM32_GPIO_PUPD_UP,
.af = STM32_GPIO_USART
};
static const struct stm32_gpio_dsc usart_gpio[] = {
{STM32_GPIO_PORT_X, STM32_GPIO_PIN_TX}, /* TX */
{STM32_GPIO_PORT_X, STM32_GPIO_PIN_RX}, /* RX */
};
int uart_setup_gpio(void)
{
int i;
int rv = 0;
for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) {
rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart);
if (rv)
goto out;
}
out:
return rv;
}
const struct stm32_gpio_ctl gpio_ctl_fmc = {
.mode = STM32_GPIO_MODE_AF,
.otype = STM32_GPIO_OTYPE_PP,
.speed = STM32_GPIO_SPEED_100M,
.pupd = STM32_GPIO_PUPD_NO,
.af = STM32_GPIO_AF12
};
static const struct stm32_gpio_dsc ext_ram_fmc_gpio[] = {
/* Chip is LQFP144, see DM00077036.pdf for details */
{STM32_GPIO_PORT_D, STM32_GPIO_PIN_10}, /* 79, FMC_D15 */
{STM32_GPIO_PORT_D, STM32_GPIO_PIN_9}, /* 78, FMC_D14 */
{STM32_GPIO_PORT_D, STM32_GPIO_PIN_8}, /* 77, FMC_D13 */
{STM32_GPIO_PORT_E, STM32_GPIO_PIN_15}, /* 68, FMC_D12 */
{STM32_GPIO_PORT_E, STM32_GPIO_PIN_14}, /* 67, FMC_D11 */
{STM32_GPIO_PORT_E, STM32_GPIO_PIN_13}, /* 66, FMC_D10 */
{STM32_GPIO_PORT_E, STM32_GPIO_PIN_12}, /* 65, FMC_D9 */
{STM32_GPIO_PORT_E, STM32_GPIO_PIN_11}, /* 64, FMC_D8 */
{STM32_GPIO_PORT_E, STM32_GPIO_PIN_10}, /* 63, FMC_D7 */
{STM32_GPIO_PORT_E, STM32_GPIO_PIN_9}, /* 60, FMC_D6 */
{STM32_GPIO_PORT_E, STM32_GPIO_PIN_8}, /* 59, FMC_D5 */
{STM32_GPIO_PORT_E, STM32_GPIO_PIN_7}, /* 58, FMC_D4 */
{STM32_GPIO_PORT_D, STM32_GPIO_PIN_1}, /* 115, FMC_D3 */
{STM32_GPIO_PORT_D, STM32_GPIO_PIN_0}, /* 114, FMC_D2 */
{STM32_GPIO_PORT_D, STM32_GPIO_PIN_15}, /* 86, FMC_D1 */
{STM32_GPIO_PORT_D, STM32_GPIO_PIN_14}, /* 85, FMC_D0 */
{STM32_GPIO_PORT_E, STM32_GPIO_PIN_1}, /* 142, FMC_NBL1 */
{STM32_GPIO_PORT_E, STM32_GPIO_PIN_0}, /* 141, FMC_NBL0 */
{STM32_GPIO_PORT_G, STM32_GPIO_PIN_5}, /* 90, FMC_A15, BA1 */
{STM32_GPIO_PORT_G, STM32_GPIO_PIN_4}, /* 89, FMC_A14, BA0 */
{STM32_GPIO_PORT_G, STM32_GPIO_PIN_1}, /* 57, FMC_A11 */
{STM32_GPIO_PORT_G, STM32_GPIO_PIN_0}, /* 56, FMC_A10 */
{STM32_GPIO_PORT_F, STM32_GPIO_PIN_15}, /* 55, FMC_A9 */
{STM32_GPIO_PORT_F, STM32_GPIO_PIN_14}, /* 54, FMC_A8 */
{STM32_GPIO_PORT_F, STM32_GPIO_PIN_13}, /* 53, FMC_A7 */
{STM32_GPIO_PORT_F, STM32_GPIO_PIN_12}, /* 50, FMC_A6 */
{STM32_GPIO_PORT_F, STM32_GPIO_PIN_5}, /* 15, FMC_A5 */
{STM32_GPIO_PORT_F, STM32_GPIO_PIN_4}, /* 14, FMC_A4 */
{STM32_GPIO_PORT_F, STM32_GPIO_PIN_3}, /* 13, FMC_A3 */
{STM32_GPIO_PORT_F, STM32_GPIO_PIN_2}, /* 12, FMC_A2 */
{STM32_GPIO_PORT_F, STM32_GPIO_PIN_1}, /* 11, FMC_A1 */
{STM32_GPIO_PORT_F, STM32_GPIO_PIN_0}, /* 10, FMC_A0 */
{STM32_GPIO_PORT_B, STM32_GPIO_PIN_6}, /* 136, SDRAM_NE */
{STM32_GPIO_PORT_F, STM32_GPIO_PIN_11}, /* 49, SDRAM_NRAS */
{STM32_GPIO_PORT_G, STM32_GPIO_PIN_15}, /* 132, SDRAM_NCAS */
{STM32_GPIO_PORT_C, STM32_GPIO_PIN_0}, /* 26, SDRAM_NWE */
{STM32_GPIO_PORT_B, STM32_GPIO_PIN_5}, /* 135, SDRAM_CKE */
{STM32_GPIO_PORT_G, STM32_GPIO_PIN_8}, /* 93, SDRAM_CLK */
};
static int fmc_setup_gpio(void)
{
int rv = 0;
int i;
for (i = 0; i < ARRAY_SIZE(ext_ram_fmc_gpio); i++) {
rv = stm32_gpio_config(&ext_ram_fmc_gpio[i],
&gpio_ctl_fmc);
if (rv)
goto out;
}
out:
return rv;
}
/*
* STM32 RCC FMC specific definitions
*/
#define STM32_RCC_ENR_FMC (1 << 0) /* FMC module clock */
static inline u32 _ns2clk(u32 ns, u32 freq)
{
u32 tmp = freq/1000000;
return (tmp * ns) / 1000;
}
#define NS2CLK(ns) (_ns2clk(ns, freq))
/*
* Following are timings for IS42S16400J, from corresponding datasheet
*/
#define SDRAM_CAS 3 /* 3 cycles */
#define SDRAM_NB 1 /* Number of banks */
#define SDRAM_MWID 1 /* 16 bit memory */
#define SDRAM_NR 0x1 /* 12-bit row */
#define SDRAM_NC 0x0 /* 8-bit col */
#define SDRAM_RBURST 0x1 /* Single read requests always as bursts */
#define SDRAM_RPIPE 0x0 /* No HCLK clock cycle delay */
#define SDRAM_TRRD (NS2CLK(14) - 1)
#define SDRAM_TRCD (NS2CLK(15) - 1)
#define SDRAM_TRP (NS2CLK(15) - 1)
#define SDRAM_TRAS (NS2CLK(42) - 1)
#define SDRAM_TRC (NS2CLK(63) - 1)
#define SDRAM_TRFC (NS2CLK(63) - 1)
#define SDRAM_TCDL (1 - 1)
#define SDRAM_TRDL (2 - 1)
#define SDRAM_TBDL (1 - 1)
#define SDRAM_TREF 1386
#define SDRAM_TCCD (1 - 1)
#define SDRAM_TXSR (NS2CLK(70) - 1)/* Row cycle time after precharge */
#define SDRAM_TMRD (3 - 1) /* Page 10, Mode Register Set */
/* Last data-in to row precharge, need also comply ineq from RM 37.7.5 */
#define SDRAM_TWR max(\
(int)max((int)SDRAM_TRDL, (int)(SDRAM_TRAS - SDRAM_TRCD - 1)), \
(int)(SDRAM_TRC - SDRAM_TRCD - SDRAM_TRP - 2)\
)
#define SDRAM_MODE_BL_SHIFT 0
#define SDRAM_MODE_CAS_SHIFT 4
#define SDRAM_MODE_BL 0
#define SDRAM_MODE_CAS SDRAM_CAS
int dram_init(void)
{
u32 freq;
int rv;
rv = fmc_setup_gpio();
if (rv)
return rv;
setbits_le32(&STM32_RCC->ahb3enr, STM32_RCC_ENR_FMC);
/*
* Get frequency for NS2CLK calculation.
*/
freq = clock_get(CLOCK_AHB) / CONFIG_SYS_RAM_FREQ_DIV;
writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
| SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
| SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
&STM32_SDRAM_FMC->sdcr1);
writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
| SDRAM_CAS << FMC_SDCR_CAS_SHIFT
| SDRAM_NB << FMC_SDCR_NB_SHIFT
| SDRAM_MWID << FMC_SDCR_MWID_SHIFT
| SDRAM_NR << FMC_SDCR_NR_SHIFT
| SDRAM_NC << FMC_SDCR_NC_SHIFT
| SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
| SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
&STM32_SDRAM_FMC->sdcr2);
writel(SDRAM_TRP << FMC_SDTR_TRP_SHIFT
| SDRAM_TRC << FMC_SDTR_TRC_SHIFT,
&STM32_SDRAM_FMC->sdtr1);
writel(SDRAM_TRCD << FMC_SDTR_TRCD_SHIFT
| SDRAM_TRP << FMC_SDTR_TRP_SHIFT
| SDRAM_TWR << FMC_SDTR_TWR_SHIFT
| SDRAM_TRC << FMC_SDTR_TRC_SHIFT
| SDRAM_TRAS << FMC_SDTR_TRAS_SHIFT
| SDRAM_TXSR << FMC_SDTR_TXSR_SHIFT
| SDRAM_TMRD << FMC_SDTR_TMRD_SHIFT,
&STM32_SDRAM_FMC->sdtr2);
writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_START_CLOCK,
&STM32_SDRAM_FMC->sdcmr);
udelay(200); /* 200 us delay, page 10, "Power-Up" */
FMC_BUSY_WAIT();
writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_PRECHARGE,
&STM32_SDRAM_FMC->sdcmr);
udelay(100);
FMC_BUSY_WAIT();
writel((FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_AUTOREFRESH
| 7 << FMC_SDCMR_NRFS_SHIFT), &STM32_SDRAM_FMC->sdcmr);
udelay(100);
FMC_BUSY_WAIT();
writel(FMC_SDCMR_BANK_2 | (SDRAM_MODE_BL << SDRAM_MODE_BL_SHIFT
| SDRAM_MODE_CAS << SDRAM_MODE_CAS_SHIFT)
<< FMC_SDCMR_MODE_REGISTER_SHIFT | FMC_SDCMR_MODE_WRITE_MODE,
&STM32_SDRAM_FMC->sdcmr);
udelay(100);
FMC_BUSY_WAIT();
writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_NORMAL,
&STM32_SDRAM_FMC->sdcmr);
FMC_BUSY_WAIT();
/* Refresh timer */
writel(SDRAM_TREF, &STM32_SDRAM_FMC->sdrtr);
/*
* Fill in global info with description of SRAM configuration
*/
gd->bd->bi_dram[0].start = CONFIG_SYS_RAM_BASE;
gd->bd->bi_dram[0].size = CONFIG_SYS_RAM_SIZE;
gd->ram_size = CONFIG_SYS_RAM_SIZE;
return rv;
}
u32 get_board_rev(void)
{
return 0;
}
int board_early_init_f(void)
{
int res;
res = uart_setup_gpio();
if (res)
return res;
return 0;
}
int board_init(void)
{
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}