mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-24 21:54:01 +00:00
08a5b4bd6c
Firmware on RPi5 return error on board revision query
through firmware interface, but on the other hand it fills
"linux,revision" in "system" node, so use it to detect board
revision.
system {
linux,revision = <0xc04170>;
linux,serial = <0x6cf44e80 0x3c533ede>;
};
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Tested-by: Jens Maus <mail@jens-maus.de>
Tested-by: Darko Alavanja <darko.alavanja@konsulko.com>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
590 lines
12 KiB
C
590 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* (C) Copyright 2012-2016 Stephen Warren
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <dm.h>
|
|
#include <env.h>
|
|
#include <efi_loader.h>
|
|
#include <fdt_support.h>
|
|
#include <fdt_simplefb.h>
|
|
#include <init.h>
|
|
#include <memalign.h>
|
|
#include <mmc.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/mbox.h>
|
|
#include <asm/arch/msg.h>
|
|
#include <asm/arch/sdhci.h>
|
|
#include <asm/global_data.h>
|
|
#include <dm/platform_data/serial_bcm283x_mu.h>
|
|
#ifdef CONFIG_ARM64
|
|
#include <asm/armv8/mmu.h>
|
|
#endif
|
|
#include <watchdog.h>
|
|
#include <dm/pinctrl.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* Assigned in lowlevel_init.S
|
|
* Push the variable into the .data section so that it
|
|
* does not get cleared later.
|
|
*/
|
|
unsigned long __section(".data") fw_dtb_pointer;
|
|
|
|
/* TODO(sjg@chromium.org): Move these to the msg.c file */
|
|
struct msg_get_arm_mem {
|
|
struct bcm2835_mbox_hdr hdr;
|
|
struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
|
|
u32 end_tag;
|
|
};
|
|
|
|
struct msg_get_board_rev {
|
|
struct bcm2835_mbox_hdr hdr;
|
|
struct bcm2835_mbox_tag_get_board_rev get_board_rev;
|
|
u32 end_tag;
|
|
};
|
|
|
|
struct msg_get_board_serial {
|
|
struct bcm2835_mbox_hdr hdr;
|
|
struct bcm2835_mbox_tag_get_board_serial get_board_serial;
|
|
u32 end_tag;
|
|
};
|
|
|
|
struct msg_get_mac_address {
|
|
struct bcm2835_mbox_hdr hdr;
|
|
struct bcm2835_mbox_tag_get_mac_address get_mac_address;
|
|
u32 end_tag;
|
|
};
|
|
|
|
struct msg_get_clock_rate {
|
|
struct bcm2835_mbox_hdr hdr;
|
|
struct bcm2835_mbox_tag_get_clock_rate get_clock_rate;
|
|
u32 end_tag;
|
|
};
|
|
|
|
#ifdef CONFIG_ARM64
|
|
#define DTB_DIR "broadcom/"
|
|
#else
|
|
#define DTB_DIR ""
|
|
#endif
|
|
|
|
/*
|
|
* https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-revision-codes
|
|
*/
|
|
struct rpi_model {
|
|
const char *name;
|
|
const char *fdtfile;
|
|
bool has_onboard_eth;
|
|
};
|
|
|
|
static const struct rpi_model rpi_model_unknown = {
|
|
"Unknown model",
|
|
DTB_DIR "bcm283x-rpi-other.dtb",
|
|
false,
|
|
};
|
|
|
|
static const struct rpi_model rpi_models_new_scheme[] = {
|
|
[0x0] = {
|
|
"Model A",
|
|
DTB_DIR "bcm2835-rpi-a.dtb",
|
|
false,
|
|
},
|
|
[0x1] = {
|
|
"Model B",
|
|
DTB_DIR "bcm2835-rpi-b.dtb",
|
|
true,
|
|
},
|
|
[0x2] = {
|
|
"Model A+",
|
|
DTB_DIR "bcm2835-rpi-a-plus.dtb",
|
|
false,
|
|
},
|
|
[0x3] = {
|
|
"Model B+",
|
|
DTB_DIR "bcm2835-rpi-b-plus.dtb",
|
|
true,
|
|
},
|
|
[0x4] = {
|
|
"2 Model B",
|
|
DTB_DIR "bcm2836-rpi-2-b.dtb",
|
|
true,
|
|
},
|
|
[0x6] = {
|
|
"Compute Module",
|
|
DTB_DIR "bcm2835-rpi-cm.dtb",
|
|
false,
|
|
},
|
|
[0x8] = {
|
|
"3 Model B",
|
|
DTB_DIR "bcm2837-rpi-3-b.dtb",
|
|
true,
|
|
},
|
|
[0x9] = {
|
|
"Zero",
|
|
DTB_DIR "bcm2835-rpi-zero.dtb",
|
|
false,
|
|
},
|
|
[0xA] = {
|
|
"Compute Module 3",
|
|
DTB_DIR "bcm2837-rpi-cm3.dtb",
|
|
false,
|
|
},
|
|
[0xC] = {
|
|
"Zero W",
|
|
DTB_DIR "bcm2835-rpi-zero-w.dtb",
|
|
false,
|
|
},
|
|
[0xD] = {
|
|
"3 Model B+",
|
|
DTB_DIR "bcm2837-rpi-3-b-plus.dtb",
|
|
true,
|
|
},
|
|
[0xE] = {
|
|
"3 Model A+",
|
|
DTB_DIR "bcm2837-rpi-3-a-plus.dtb",
|
|
false,
|
|
},
|
|
[0x10] = {
|
|
"Compute Module 3+",
|
|
DTB_DIR "bcm2837-rpi-cm3.dtb",
|
|
false,
|
|
},
|
|
[0x11] = {
|
|
"4 Model B",
|
|
DTB_DIR "bcm2711-rpi-4-b.dtb",
|
|
true,
|
|
},
|
|
[0x12] = {
|
|
"Zero 2 W",
|
|
DTB_DIR "bcm2837-rpi-zero-2-w.dtb",
|
|
false,
|
|
},
|
|
[0x13] = {
|
|
"400",
|
|
DTB_DIR "bcm2711-rpi-400.dtb",
|
|
true,
|
|
},
|
|
[0x14] = {
|
|
"Compute Module 4",
|
|
DTB_DIR "bcm2711-rpi-cm4.dtb",
|
|
true,
|
|
},
|
|
[0x17] = {
|
|
"5 Model B",
|
|
DTB_DIR "bcm2712-rpi-5-b.dtb",
|
|
true,
|
|
},
|
|
};
|
|
|
|
static const struct rpi_model rpi_models_old_scheme[] = {
|
|
[0x2] = {
|
|
"Model B",
|
|
DTB_DIR "bcm2835-rpi-b.dtb",
|
|
true,
|
|
},
|
|
[0x3] = {
|
|
"Model B",
|
|
DTB_DIR "bcm2835-rpi-b.dtb",
|
|
true,
|
|
},
|
|
[0x4] = {
|
|
"Model B rev2",
|
|
DTB_DIR "bcm2835-rpi-b-rev2.dtb",
|
|
true,
|
|
},
|
|
[0x5] = {
|
|
"Model B rev2",
|
|
DTB_DIR "bcm2835-rpi-b-rev2.dtb",
|
|
true,
|
|
},
|
|
[0x6] = {
|
|
"Model B rev2",
|
|
DTB_DIR "bcm2835-rpi-b-rev2.dtb",
|
|
true,
|
|
},
|
|
[0x7] = {
|
|
"Model A",
|
|
DTB_DIR "bcm2835-rpi-a.dtb",
|
|
false,
|
|
},
|
|
[0x8] = {
|
|
"Model A",
|
|
DTB_DIR "bcm2835-rpi-a.dtb",
|
|
false,
|
|
},
|
|
[0x9] = {
|
|
"Model A",
|
|
DTB_DIR "bcm2835-rpi-a.dtb",
|
|
false,
|
|
},
|
|
[0xd] = {
|
|
"Model B rev2",
|
|
DTB_DIR "bcm2835-rpi-b-rev2.dtb",
|
|
true,
|
|
},
|
|
[0xe] = {
|
|
"Model B rev2",
|
|
DTB_DIR "bcm2835-rpi-b-rev2.dtb",
|
|
true,
|
|
},
|
|
[0xf] = {
|
|
"Model B rev2",
|
|
DTB_DIR "bcm2835-rpi-b-rev2.dtb",
|
|
true,
|
|
},
|
|
[0x10] = {
|
|
"Model B+",
|
|
DTB_DIR "bcm2835-rpi-b-plus.dtb",
|
|
true,
|
|
},
|
|
[0x11] = {
|
|
"Compute Module",
|
|
DTB_DIR "bcm2835-rpi-cm.dtb",
|
|
false,
|
|
},
|
|
[0x12] = {
|
|
"Model A+",
|
|
DTB_DIR "bcm2835-rpi-a-plus.dtb",
|
|
false,
|
|
},
|
|
[0x13] = {
|
|
"Model B+",
|
|
DTB_DIR "bcm2835-rpi-b-plus.dtb",
|
|
true,
|
|
},
|
|
[0x14] = {
|
|
"Compute Module",
|
|
DTB_DIR "bcm2835-rpi-cm.dtb",
|
|
false,
|
|
},
|
|
[0x15] = {
|
|
"Model A+",
|
|
DTB_DIR "bcm2835-rpi-a-plus.dtb",
|
|
false,
|
|
},
|
|
};
|
|
|
|
static uint32_t revision;
|
|
static uint32_t rev_scheme;
|
|
static uint32_t rev_type;
|
|
static const struct rpi_model *model;
|
|
|
|
int dram_init(void)
|
|
{
|
|
ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1);
|
|
int ret;
|
|
|
|
BCM2835_MBOX_INIT_HDR(msg);
|
|
BCM2835_MBOX_INIT_TAG(&msg->get_arm_mem, GET_ARM_MEMORY);
|
|
|
|
ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
|
|
if (ret) {
|
|
printf("bcm2835: Could not query ARM memory size\n");
|
|
return -1;
|
|
}
|
|
|
|
gd->ram_size = msg->get_arm_mem.body.resp.mem_size;
|
|
|
|
/*
|
|
* In some configurations the memory size returned by VideoCore
|
|
* is not aligned to the section size, what is mandatory for
|
|
* the u-boot's memory setup.
|
|
*/
|
|
gd->ram_size &= ~MMU_SECTION_SIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF_BOARD
|
|
int dram_init_banksize(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = fdtdec_setup_memory_banksize();
|
|
if (ret)
|
|
return ret;
|
|
|
|
return fdtdec_setup_mem_size_base();
|
|
}
|
|
#endif
|
|
|
|
static void set_fdtfile(void)
|
|
{
|
|
const char *fdtfile;
|
|
|
|
if (env_get("fdtfile"))
|
|
return;
|
|
|
|
fdtfile = model->fdtfile;
|
|
env_set("fdtfile", fdtfile);
|
|
}
|
|
|
|
/*
|
|
* If the firmware provided a valid FDT at boot time, let's expose it in
|
|
* ${fdt_addr} so it may be passed unmodified to the kernel.
|
|
*/
|
|
static void set_fdt_addr(void)
|
|
{
|
|
if (env_get("fdt_addr"))
|
|
return;
|
|
|
|
if (fdt_magic(fw_dtb_pointer) != FDT_MAGIC)
|
|
return;
|
|
|
|
env_set_hex("fdt_addr", fw_dtb_pointer);
|
|
}
|
|
|
|
/*
|
|
* Prevent relocation from stomping on a firmware provided FDT blob.
|
|
*/
|
|
phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
|
|
{
|
|
if ((gd->ram_top - fw_dtb_pointer) > SZ_64M)
|
|
return gd->ram_top;
|
|
return fw_dtb_pointer & ~0xffff;
|
|
}
|
|
|
|
static void set_usbethaddr(void)
|
|
{
|
|
ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_mac_address, msg, 1);
|
|
int ret;
|
|
|
|
if (!model->has_onboard_eth)
|
|
return;
|
|
|
|
if (env_get("usbethaddr"))
|
|
return;
|
|
|
|
BCM2835_MBOX_INIT_HDR(msg);
|
|
BCM2835_MBOX_INIT_TAG(&msg->get_mac_address, GET_MAC_ADDRESS);
|
|
|
|
ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
|
|
if (ret) {
|
|
printf("bcm2835: Could not query MAC address\n");
|
|
/* Ignore error; not critical */
|
|
return;
|
|
}
|
|
|
|
eth_env_set_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac);
|
|
|
|
if (!env_get("ethaddr"))
|
|
env_set("ethaddr", env_get("usbethaddr"));
|
|
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
static void set_board_info(void)
|
|
{
|
|
char s[11];
|
|
|
|
snprintf(s, sizeof(s), "0x%X", revision);
|
|
env_set("board_revision", s);
|
|
snprintf(s, sizeof(s), "%d", rev_scheme);
|
|
env_set("board_rev_scheme", s);
|
|
/* Can't rename this to board_rev_type since it's an ABI for scripts */
|
|
snprintf(s, sizeof(s), "0x%X", rev_type);
|
|
env_set("board_rev", s);
|
|
env_set("board_name", model->name);
|
|
}
|
|
#endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */
|
|
|
|
static void set_serial_number(void)
|
|
{
|
|
ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_board_serial, msg, 1);
|
|
int ret;
|
|
char serial_string[17] = { 0 };
|
|
|
|
if (env_get("serial#"))
|
|
return;
|
|
|
|
BCM2835_MBOX_INIT_HDR(msg);
|
|
BCM2835_MBOX_INIT_TAG_NO_REQ(&msg->get_board_serial, GET_BOARD_SERIAL);
|
|
|
|
ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
|
|
if (ret) {
|
|
printf("bcm2835: Could not query board serial\n");
|
|
/* Ignore error; not critical */
|
|
return;
|
|
}
|
|
|
|
snprintf(serial_string, sizeof(serial_string), "%016llx",
|
|
msg->get_board_serial.body.resp.serial);
|
|
env_set("serial#", serial_string);
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
set_fdt_addr();
|
|
set_fdtfile();
|
|
set_usbethaddr();
|
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
set_board_info();
|
|
#endif
|
|
set_serial_number();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void get_board_revision(void)
|
|
{
|
|
ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_board_rev, msg, 1);
|
|
int ret;
|
|
const struct rpi_model *models;
|
|
uint32_t models_count;
|
|
ofnode node;
|
|
|
|
BCM2835_MBOX_INIT_HDR(msg);
|
|
BCM2835_MBOX_INIT_TAG(&msg->get_board_rev, GET_BOARD_REV);
|
|
|
|
ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
|
|
if (ret) {
|
|
/* Ignore error; not critical */
|
|
node = ofnode_path("/system");
|
|
if (!ofnode_valid(node)) {
|
|
printf("bcm2835: Could not find /system node\n");
|
|
return;
|
|
}
|
|
|
|
ret = ofnode_read_u32(node, "linux,revision", &revision);
|
|
if (ret) {
|
|
printf("bcm2835: Could not find linux,revision\n");
|
|
return;
|
|
}
|
|
} else {
|
|
revision = msg->get_board_rev.body.resp.rev;
|
|
}
|
|
|
|
/*
|
|
* For details of old-vs-new scheme, see:
|
|
* https://github.com/pimoroni/RPi.version/blob/master/RPi/version.py
|
|
* http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=99293&p=690282
|
|
* (a few posts down)
|
|
*
|
|
* For the RPi 1, bit 24 is the "warranty bit", so we mask off just the
|
|
* lower byte to use as the board rev:
|
|
* http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=98367&start=250
|
|
* http://www.raspberrypi.org/forums/viewtopic.php?f=31&t=20594
|
|
*/
|
|
if (revision & 0x800000) {
|
|
rev_scheme = 1;
|
|
rev_type = (revision >> 4) & 0xff;
|
|
models = rpi_models_new_scheme;
|
|
models_count = ARRAY_SIZE(rpi_models_new_scheme);
|
|
} else {
|
|
rev_scheme = 0;
|
|
rev_type = revision & 0xff;
|
|
models = rpi_models_old_scheme;
|
|
models_count = ARRAY_SIZE(rpi_models_old_scheme);
|
|
}
|
|
if (rev_type >= models_count) {
|
|
printf("RPI: Board rev 0x%x outside known range\n", rev_type);
|
|
model = &rpi_model_unknown;
|
|
} else if (!models[rev_type].name) {
|
|
printf("RPI: Board rev 0x%x unknown\n", rev_type);
|
|
model = &rpi_model_unknown;
|
|
} else {
|
|
model = &models[rev_type];
|
|
}
|
|
|
|
printf("RPI %s (0x%x)\n", model->name, revision);
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
#ifdef CONFIG_HW_WATCHDOG
|
|
hw_watchdog_init();
|
|
#endif
|
|
|
|
get_board_revision();
|
|
|
|
gd->bd->bi_boot_params = 0x100;
|
|
|
|
return bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
|
|
}
|
|
|
|
/*
|
|
* If the firmware passed a device tree use it for U-Boot.
|
|
*/
|
|
void *board_fdt_blob_setup(int *err)
|
|
{
|
|
*err = 0;
|
|
if (fdt_magic(fw_dtb_pointer) != FDT_MAGIC) {
|
|
*err = -ENXIO;
|
|
return NULL;
|
|
}
|
|
|
|
return (void *)fw_dtb_pointer;
|
|
}
|
|
|
|
int copy_property(void *dst, void *src, char *path, char *property)
|
|
{
|
|
int dst_offset, src_offset;
|
|
const fdt32_t *prop;
|
|
int len;
|
|
|
|
src_offset = fdt_path_offset(src, path);
|
|
dst_offset = fdt_path_offset(dst, path);
|
|
|
|
if (src_offset < 0 || dst_offset < 0)
|
|
return -1;
|
|
|
|
prop = fdt_getprop(src, src_offset, property, &len);
|
|
if (!prop)
|
|
return -1;
|
|
|
|
return fdt_setprop(dst, dst_offset, property, prop, len);
|
|
}
|
|
|
|
/* Copy tweaks from the firmware dtb to the loaded dtb */
|
|
void update_fdt_from_fw(void *fdt, void *fw_fdt)
|
|
{
|
|
/* Using dtb from firmware directly; leave it alone */
|
|
if (fdt == fw_fdt)
|
|
return;
|
|
|
|
/* The firmware provides a more precie model; so copy that */
|
|
copy_property(fdt, fw_fdt, "/", "model");
|
|
|
|
/* memory reserve as suggested by the firmware */
|
|
copy_property(fdt, fw_fdt, "/", "memreserve");
|
|
|
|
/* Adjust dma-ranges for the SD card and PCI bus as they can depend on
|
|
* the SoC revision
|
|
*/
|
|
copy_property(fdt, fw_fdt, "emmc2bus", "dma-ranges");
|
|
copy_property(fdt, fw_fdt, "pcie0", "dma-ranges");
|
|
|
|
/* Bootloader configuration template exposes as nvmem */
|
|
if (copy_property(fdt, fw_fdt, "blconfig", "reg") == 0)
|
|
copy_property(fdt, fw_fdt, "blconfig", "status");
|
|
|
|
/* kernel address randomisation seed as provided by the firmware */
|
|
copy_property(fdt, fw_fdt, "/chosen", "kaslr-seed");
|
|
|
|
/* address of the PHY device as provided by the firmware */
|
|
copy_property(fdt, fw_fdt, "ethernet0/mdio@e14/ethernet-phy@1", "reg");
|
|
}
|
|
|
|
int ft_board_setup(void *blob, struct bd_info *bd)
|
|
{
|
|
int node;
|
|
|
|
update_fdt_from_fw(blob, (void *)fw_dtb_pointer);
|
|
|
|
node = fdt_node_offset_by_compatible(blob, -1, "simple-framebuffer");
|
|
if (node < 0)
|
|
fdt_simplefb_add_node(blob);
|
|
else
|
|
fdt_simplefb_enable_and_mem_rsv(blob);
|
|
|
|
#ifdef CONFIG_EFI_LOADER
|
|
/* Reserve the spin table */
|
|
efi_add_memory_map(0, CONFIG_RPI_EFI_NR_SPIN_PAGES << EFI_PAGE_SHIFT,
|
|
EFI_RESERVED_MEMORY_TYPE);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|