u-boot/drivers
Masahiro Yamada 94bf34b172 clk: uniphier: add NAND 200MHz clock
The Denali NAND controller IP needs three clocks:

 - clk: controller core clock

 - clk_x: bus interface clock

 - ecc_clk: clock at which ECC circuitry is run

Currently, only the first one (50MHz) is provided.  The rest of the
two clock ports must be connected to the 200MHz clock line.  Add this.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-29 11:38:38 +09:00
..
adc dm: adc: add uclass's mask and conversion helpers 2018-11-20 12:35:25 -05:00
ata scsi: ceva: add ls2080a soc support 2018-12-06 14:38:03 -08:00
axi drivers: cosmetic: Convert SPDX license tags to Linux Kernel style 2018-10-28 09:26:39 -04:00
bios_emulator bios_emulator: remove assignment without effect 2018-07-23 14:33:21 -04:00
block blk: Rework guard around part_init call 2018-12-12 12:14:22 -05:00
board drivers: cosmetic: Convert SPDX license tags to Linux Kernel style 2018-10-28 09:26:39 -04:00
bootcount bootcount: add a DM RTC backing store for bootcount 2018-12-10 10:04:45 +01:00
clk clk: uniphier: add NAND 200MHz clock 2018-12-29 11:38:38 +09:00
core syscon: update syscon_node_to_regmap to use the DM functions 2018-12-15 11:49:56 -05:00
cpu cpu: Add a RISC-V CPU driver 2018-12-18 09:56:26 +08:00
crypto SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ddr Add TFA boot flow for some Layerscape platforms 2018-12-10 17:19:59 -05:00
demo SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
dfu dfu: nand: Add missing dependency on CMD_MTDPARTS 2018-11-13 18:53:10 +05:30
dma dma: add bcm6348-iudma support 2018-12-19 15:23:00 +01:00
fastboot drivers: cosmetic: Convert SPDX license tags to Linux Kernel style 2018-10-28 09:26:39 -04:00
firmware firmware: psci: introduce SPL_ARM_PSCI_FW 2018-12-12 12:14:25 -05:00
fpga arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table 2018-12-20 17:12:25 +01:00
gpio gpio: mscc-bitbang-spi: Add a simple gpio driver for bitbgang spi 2018-12-19 15:23:01 +01:00
hwspinlock hwspinlock: add stm32 hardware spinlock support 2018-12-06 23:26:33 -05:00
i2c i2c: tegra: Fix regression by implementing a dummy probe_chip() callback 2018-12-12 06:06:14 +01:00
input input: i8042: Use remove() instead of exported functions 2018-12-05 06:01:35 -07:00
led dm: led: move default state support in led uclass 2018-08-10 10:27:32 -04:00
mailbox drivers: cosmetic: Convert SPDX license tags to Linux Kernel style 2018-10-28 09:26:39 -04:00
memory SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
misc misc: Add JZ47xx efuse driver 2018-12-19 15:23:01 +01:00
mmc mmc: Add JZ47xx SD/MMC controller driver 2018-12-19 15:23:01 +01:00
mtd mtd: rawnand: denali: fix a race condition when DMA is kicked 2018-12-29 11:38:37 +09:00
net phy: Fix u-boot coruption when fixed-phy is used 2018-12-26 21:35:52 -05:00
nvme blk: Call part_init() in the post_probe() method 2018-11-14 09:16:27 -08:00
pch SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
pci video: Allow driver to specify the line length 2018-12-03 19:09:44 +01:00
pcmcia SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
phy phy: omap_usb2: Add support for am437x 2018-12-14 17:59:09 +01:00
pinctrl dm: pinctrl: Prevent (re-)configuring pins when already done before relocation 2018-12-26 21:21:07 -05:00
power power: regulator: Return success on attempt to disable an always-on regulator 2018-12-27 07:48:31 -05:00
pwm pwm: sunxi: choose best prescaler to improve PWM resolution 2018-10-24 21:57:16 +05:30
qe drivers: qe: add TFABOOT support 2018-12-06 14:37:51 -08:00
ram rockchip: rk322x: ram: enable DRAM init in SPL instead of TPL 2018-12-10 10:04:44 +01:00
remoteproc spl: Allow remoteproc drivers to be used within SPL 2018-09-11 08:32:55 -04:00
reset drivers: cosmetic: Convert SPDX license tags to Linux Kernel style 2018-10-28 09:26:39 -04:00
rtc rtc: m41t62: Convert the RTC driver to support the driver model (DM) 2018-12-03 10:44:10 -05:00
scsi blk: Call part_init() in the post_probe() method 2018-11-14 09:16:27 -08:00
serial drivers: serial: Add SiFive UART driver 2018-12-18 09:56:54 +08:00
smem drivers: smem: sandbox 2018-07-19 16:31:38 -04:00
soc SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
sound dm: sound: Use the correct number of channels for sound 2018-12-13 16:37:10 -07:00
spi DW SPI: Allow to overload the management of the external CS 2018-12-19 15:23:01 +01:00
spmi SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
sysreset sandbox: sysreset: Update to support power-on reset 2018-12-05 06:01:34 -07:00
tee tee: change return code for REE FS supplicant cmd 2018-12-15 11:49:19 -05:00
thermal SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
timer timer: Add generic driver for RISC-V privileged architecture defined timer 2018-12-18 09:56:26 +08:00
tpm tpm: Export the open/close functions 2018-11-29 09:30:06 -07:00
usb usb: musb-new: sunxi: Fix null pointer access 2018-12-14 17:59:10 +01:00
video Minor sandbox enhancements / fixes 2018-12-05 20:32:25 -05:00
virtio virtio: Add a Sandbox transport driver 2018-11-14 09:16:28 -08:00
w1 w1: fix occasional enumeration failure 2018-12-06 17:15:15 -05:00
w1-eeprom w1-eeprom: Add support for Maxim DS2502 add only memory 2018-11-16 16:51:55 -05:00
watchdog drivers: watchdog: add a DM driver for the MPC8xx watchdog 2018-12-03 10:44:10 -05:00
Kconfig dm: Add Hardware Spinlock class 2018-12-06 23:26:32 -05:00
Makefile spl: drivers: Link usb common library to SPL if USB gadget is enabled 2018-12-14 17:59:09 +01:00