mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 13:33:40 +00:00
0341733570
Add UTMI support for SAMA7G5. SAMA7G5's UTMI control is done via XTALF register. Values written at bits 2..0 in this register correspond to the on board crystal oscillator frequency. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
234 lines
4.8 KiB
C
234 lines
4.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* UTMI clock support for AT91 architectures.
|
|
*
|
|
* Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries
|
|
*
|
|
* Author: Claudiu Beznea <claudiu.beznea@microchip.com>
|
|
*
|
|
* Based on drivers/clk/at91/clk-utmi.c from Linux.
|
|
*/
|
|
#include <asm/processor.h>
|
|
#include <common.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/clk/at91_pmc.h>
|
|
#include <mach/at91_sfr.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
|
|
#include "pmc.h"
|
|
|
|
#define UBOOT_DM_CLK_AT91_UTMI "at91-utmi-clk"
|
|
#define UBOOT_DM_CLK_AT91_SAMA7G5_UTMI "at91-sama7g5-utmi-clk"
|
|
|
|
/*
|
|
* The purpose of this clock is to generate a 480 MHz signal. A different
|
|
* rate can't be configured.
|
|
*/
|
|
#define UTMI_RATE 480000000
|
|
|
|
struct clk_utmi {
|
|
void __iomem *base;
|
|
struct regmap *regmap_sfr;
|
|
struct clk clk;
|
|
};
|
|
|
|
#define to_clk_utmi(_clk) container_of(_clk, struct clk_utmi, clk)
|
|
|
|
static inline bool clk_utmi_ready(struct regmap *regmap)
|
|
{
|
|
unsigned int status;
|
|
|
|
pmc_read(regmap, AT91_PMC_SR, &status);
|
|
|
|
return !!(status & AT91_PMC_LOCKU);
|
|
}
|
|
|
|
static int clk_utmi_enable(struct clk *clk)
|
|
{
|
|
struct clk_utmi *utmi = to_clk_utmi(clk);
|
|
unsigned int uckr = AT91_PMC_UPLLEN | AT91_PMC_UPLLCOUNT |
|
|
AT91_PMC_BIASEN;
|
|
unsigned int utmi_ref_clk_freq;
|
|
ulong parent_rate = clk_get_parent_rate(clk);
|
|
|
|
/*
|
|
* If mainck rate is different from 12 MHz, we have to configure the
|
|
* FREQ field of the SFR_UTMICKTRIM register to generate properly
|
|
* the utmi clock.
|
|
*/
|
|
switch (parent_rate) {
|
|
case 12000000:
|
|
utmi_ref_clk_freq = 0;
|
|
break;
|
|
case 16000000:
|
|
utmi_ref_clk_freq = 1;
|
|
break;
|
|
case 24000000:
|
|
utmi_ref_clk_freq = 2;
|
|
break;
|
|
/*
|
|
* Not supported on SAMA5D2 but it's not an issue since MAINCK
|
|
* maximum value is 24 MHz.
|
|
*/
|
|
case 48000000:
|
|
utmi_ref_clk_freq = 3;
|
|
break;
|
|
default:
|
|
debug("UTMICK: unsupported mainck rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (utmi->regmap_sfr) {
|
|
regmap_update_bits(utmi->regmap_sfr, AT91_SFR_UTMICKTRIM,
|
|
AT91_UTMICKTRIM_FREQ, utmi_ref_clk_freq);
|
|
} else if (utmi_ref_clk_freq) {
|
|
debug("UTMICK: sfr node required\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pmc_update_bits(utmi->base, AT91_CKGR_UCKR, uckr, uckr);
|
|
|
|
while (!clk_utmi_ready(utmi->base)) {
|
|
debug("waiting for utmi...\n");
|
|
cpu_relax();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int clk_utmi_disable(struct clk *clk)
|
|
{
|
|
struct clk_utmi *utmi = to_clk_utmi(clk);
|
|
|
|
pmc_update_bits(utmi->base, AT91_CKGR_UCKR, AT91_PMC_UPLLEN, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ulong clk_utmi_get_rate(struct clk *clk)
|
|
{
|
|
/* UTMI clk rate is fixed. */
|
|
return UTMI_RATE;
|
|
}
|
|
|
|
static const struct clk_ops utmi_ops = {
|
|
.enable = clk_utmi_enable,
|
|
.disable = clk_utmi_disable,
|
|
.get_rate = clk_utmi_get_rate,
|
|
};
|
|
|
|
struct clk *at91_clk_register_utmi(void __iomem *base, struct udevice *dev,
|
|
const char *name, const char *parent_name)
|
|
{
|
|
struct udevice *syscon;
|
|
struct clk_utmi *utmi;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
if (!base || !dev || !name || !parent_name)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
|
|
"regmap-sfr", &syscon);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
utmi = kzalloc(sizeof(*utmi), GFP_KERNEL);
|
|
if (!utmi)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
utmi->base = base;
|
|
utmi->regmap_sfr = syscon_get_regmap(syscon);
|
|
if (!utmi->regmap_sfr) {
|
|
kfree(utmi);
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
clk = &utmi->clk;
|
|
clk->flags = CLK_GET_RATE_NOCACHE;
|
|
ret = clk_register(clk, UBOOT_DM_CLK_AT91_UTMI, name, parent_name);
|
|
if (ret) {
|
|
kfree(utmi);
|
|
clk = ERR_PTR(ret);
|
|
}
|
|
|
|
return clk;
|
|
}
|
|
|
|
U_BOOT_DRIVER(at91_utmi_clk) = {
|
|
.name = UBOOT_DM_CLK_AT91_UTMI,
|
|
.id = UCLASS_CLK,
|
|
.ops = &utmi_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|
|
|
|
static int clk_utmi_sama7g5_enable(struct clk *clk)
|
|
{
|
|
struct clk_utmi *utmi = to_clk_utmi(clk);
|
|
ulong parent_rate = clk_get_parent_rate(clk);
|
|
unsigned int val;
|
|
|
|
switch (parent_rate) {
|
|
case 16000000:
|
|
val = 0;
|
|
break;
|
|
case 20000000:
|
|
val = 2;
|
|
break;
|
|
case 24000000:
|
|
val = 3;
|
|
break;
|
|
case 32000000:
|
|
val = 5;
|
|
break;
|
|
default:
|
|
debug("UTMICK: unsupported main_xtal rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pmc_write(utmi->base, AT91_PMC_XTALF, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops sama7g5_utmi_ops = {
|
|
.enable = clk_utmi_sama7g5_enable,
|
|
.get_rate = clk_utmi_get_rate,
|
|
};
|
|
|
|
struct clk *at91_clk_sama7g5_register_utmi(void __iomem *base,
|
|
const char *name, const char *parent_name)
|
|
{
|
|
struct clk_utmi *utmi;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
if (!base || !name || !parent_name)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
utmi = kzalloc(sizeof(*utmi), GFP_KERNEL);
|
|
if (!utmi)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
utmi->base = base;
|
|
|
|
clk = &utmi->clk;
|
|
ret = clk_register(clk, UBOOT_DM_CLK_AT91_SAMA7G5_UTMI, name,
|
|
parent_name);
|
|
if (ret) {
|
|
kfree(utmi);
|
|
clk = ERR_PTR(ret);
|
|
}
|
|
|
|
return clk;
|
|
}
|
|
|
|
U_BOOT_DRIVER(at91_sama7g5_utmi_clk) = {
|
|
.name = UBOOT_DM_CLK_AT91_SAMA7G5_UTMI,
|
|
.id = UCLASS_CLK,
|
|
.ops = &sama7g5_utmi_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|