u-boot/drivers/gpio/tegra186_gpio.c
Matthias Schiffer 5fecea171d treewide: use dev_read_addr_*_ptr() where appropriate
A follow-up to commit 842fb5de42
("drivers: use devfdt_get_addr_size_index_ptr when cast to pointer")
and commit 320a1938b6
("drivers: use devfdt_get_addr_index_ptr when cast to pointer").

In addition to using the *_ptr variants of these functions where the
address is cast to a pointer, this also changes devfdt_get_addr_*() to
dev_read_addr_*() in a few places. Some variable and field types are
changed from fdt_addr_t or phys_addr_t to void* where the cast was
happening later.

This patch fixes a number of compile warnings when building a 32bit
U-Boot with CONFIG_PHYS_64BIT=y. In some places, it also fixes error
handling where the return value of dev_read_addr() etc. was checked for
NULL instead of FDT_ADDR_T_NONE.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-10-13 14:01:42 -06:00

283 lines
6.5 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2010-2016, NVIDIA CORPORATION.
* (based on tegra_gpio.c)
*/
#include <common.h>
#include <dm.h>
#include <malloc.h>
#include <errno.h>
#include <fdtdec.h>
#include <asm/io.h>
#include <asm/bitops.h>
#include <asm/gpio.h>
#include <dm/device-internal.h>
#include <dt-bindings/gpio/gpio.h>
#include "tegra186_gpio_priv.h"
struct tegra186_gpio_port_data {
const char *name;
uint32_t offset;
};
struct tegra186_gpio_ctlr_data {
const struct tegra186_gpio_port_data *ports;
uint32_t port_count;
};
struct tegra186_gpio_plat {
const char *name;
uint32_t *regs;
};
static uint32_t *tegra186_gpio_reg(struct udevice *dev, uint32_t reg,
uint32_t gpio)
{
struct tegra186_gpio_plat *plat = dev_get_plat(dev);
uint32_t index = (reg + (gpio * TEGRA186_GPIO_PER_GPIO_STRIDE)) / 4;
return &(plat->regs[index]);
}
static int tegra186_gpio_set_out(struct udevice *dev, unsigned offset,
bool output)
{
uint32_t *reg;
uint32_t rval;
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_OUTPUT_CONTROL, offset);
rval = readl(reg);
if (output)
rval &= ~TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED;
else
rval |= TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED;
writel(rval, reg);
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_ENABLE_CONFIG, offset);
rval = readl(reg);
if (output)
rval |= TEGRA186_GPIO_ENABLE_CONFIG_OUT;
else
rval &= ~TEGRA186_GPIO_ENABLE_CONFIG_OUT;
rval |= TEGRA186_GPIO_ENABLE_CONFIG_ENABLE;
writel(rval, reg);
return 0;
}
static int tegra186_gpio_set_val(struct udevice *dev, unsigned offset, bool val)
{
uint32_t *reg;
uint32_t rval;
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_OUTPUT_VALUE, offset);
rval = readl(reg);
if (val)
rval |= TEGRA186_GPIO_OUTPUT_VALUE_HIGH;
else
rval &= ~TEGRA186_GPIO_OUTPUT_VALUE_HIGH;
writel(rval, reg);
return 0;
}
static int tegra186_gpio_direction_input(struct udevice *dev, unsigned offset)
{
return tegra186_gpio_set_out(dev, offset, false);
}
static int tegra186_gpio_direction_output(struct udevice *dev, unsigned offset,
int value)
{
int ret;
ret = tegra186_gpio_set_val(dev, offset, value != 0);
if (ret)
return ret;
return tegra186_gpio_set_out(dev, offset, true);
}
static int tegra186_gpio_get_value(struct udevice *dev, unsigned offset)
{
uint32_t *reg;
uint32_t rval;
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_ENABLE_CONFIG, offset);
rval = readl(reg);
if (rval & TEGRA186_GPIO_ENABLE_CONFIG_OUT)
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_OUTPUT_VALUE,
offset);
else
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_INPUT, offset);
rval = readl(reg);
return !!rval;
}
static int tegra186_gpio_set_value(struct udevice *dev, unsigned offset,
int value)
{
return tegra186_gpio_set_val(dev, offset, value != 0);
}
static int tegra186_gpio_get_function(struct udevice *dev, unsigned offset)
{
uint32_t *reg;
uint32_t rval;
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_ENABLE_CONFIG, offset);
rval = readl(reg);
if (rval & TEGRA186_GPIO_ENABLE_CONFIG_OUT)
return GPIOF_OUTPUT;
else
return GPIOF_INPUT;
}
static int tegra186_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
struct ofnode_phandle_args *args)
{
int gpio, port, ret;
gpio = args->args[0];
port = gpio / TEGRA186_GPIO_PER_GPIO_COUNT;
ret = device_get_child(dev, port, &desc->dev);
if (ret)
return ret;
desc->offset = gpio % TEGRA186_GPIO_PER_GPIO_COUNT;
desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0;
return 0;
}
static const struct dm_gpio_ops tegra186_gpio_ops = {
.direction_input = tegra186_gpio_direction_input,
.direction_output = tegra186_gpio_direction_output,
.get_value = tegra186_gpio_get_value,
.set_value = tegra186_gpio_set_value,
.get_function = tegra186_gpio_get_function,
.xlate = tegra186_gpio_xlate,
};
/**
* We have a top-level GPIO device with no actual GPIOs. It has a child device
* for each port within the controller.
*/
static int tegra186_gpio_bind(struct udevice *parent)
{
struct tegra186_gpio_plat *parent_plat = dev_get_plat(parent);
struct tegra186_gpio_ctlr_data *ctlr_data =
(struct tegra186_gpio_ctlr_data *)dev_get_driver_data(parent);
uint32_t *regs;
int port, ret;
/* If this is a child device, there is nothing to do here */
if (parent_plat)
return 0;
regs = dev_read_addr_name_ptr(parent, "gpio");
if (!regs)
return -EINVAL;
for (port = 0; port < ctlr_data->port_count; port++) {
struct tegra186_gpio_plat *plat;
struct udevice *dev;
plat = calloc(1, sizeof(*plat));
if (!plat)
return -ENOMEM;
plat->name = ctlr_data->ports[port].name;
plat->regs = &(regs[ctlr_data->ports[port].offset / 4]);
ret = device_bind(parent, parent->driver, plat->name, plat,
dev_ofnode(parent), &dev);
if (ret)
return ret;
}
return 0;
}
static int tegra186_gpio_probe(struct udevice *dev)
{
struct tegra186_gpio_plat *plat = dev_get_plat(dev);
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
/* Only child devices have ports */
if (!plat)
return 0;
uc_priv->gpio_count = TEGRA186_GPIO_PER_GPIO_COUNT;
uc_priv->bank_name = plat->name;
return 0;
}
static const struct tegra186_gpio_port_data tegra186_gpio_main_ports[] = {
{"A", 0x2000},
{"B", 0x3000},
{"C", 0x3200},
{"D", 0x3400},
{"E", 0x2200},
{"F", 0x2400},
{"G", 0x4200},
{"H", 0x1000},
{"I", 0x0800},
{"J", 0x5000},
{"K", 0x5200},
{"L", 0x1200},
{"M", 0x5600},
{"N", 0x0000},
{"O", 0x0200},
{"P", 0x4000},
{"Q", 0x0400},
{"R", 0x0a00},
{"T", 0x0600},
{"X", 0x1400},
{"Y", 0x1600},
{"BB", 0x2600},
{"CC", 0x5400},
};
static const struct tegra186_gpio_ctlr_data tegra186_gpio_main_data = {
.ports = tegra186_gpio_main_ports,
.port_count = ARRAY_SIZE(tegra186_gpio_main_ports),
};
static const struct tegra186_gpio_port_data tegra186_gpio_aon_ports[] = {
{"S", 0x0200},
{"U", 0x0400},
{"V", 0x0800},
{"W", 0x0a00},
{"Z", 0x0e00},
{"AA", 0x0c00},
{"EE", 0x0600},
{"FF", 0x0000},
};
static const struct tegra186_gpio_ctlr_data tegra186_gpio_aon_data = {
.ports = tegra186_gpio_aon_ports,
.port_count = ARRAY_SIZE(tegra186_gpio_aon_ports),
};
static const struct udevice_id tegra186_gpio_ids[] = {
{
.compatible = "nvidia,tegra186-gpio",
.data = (ulong)&tegra186_gpio_main_data,
},
{
.compatible = "nvidia,tegra186-gpio-aon",
.data = (ulong)&tegra186_gpio_aon_data,
},
{ }
};
U_BOOT_DRIVER(tegra186_gpio) = {
.name = "tegra186_gpio",
.id = UCLASS_GPIO,
.of_match = tegra186_gpio_ids,
.bind = tegra186_gpio_bind,
.probe = tegra186_gpio_probe,
.ops = &tegra186_gpio_ops,
};