u-boot/arch/arm/mach-omap2/omap5/fdt.c
Suman Anna 1045ff4d1a ARM: DRA7: Fixup DSP OPP_HIGH clock rate on DRA76P/DRA77P SoCs
The commit 1b42ab3eda ("ARM: DRA7: Fixup DSPEVE, IVA and GPU clock
frequencies based on OPP") added the core logic to update the kernel
device-tree blob to adjust the DSP, IVA and GPU DPLL clocks based on
a one-time OPP choice selected in U-Boot for most of the DRA7xx/AM57xx
family of SoCs.

The DSPs on DRA76xP/DRA77xP SoCs (DRA76x ACD package SoCs) though
provide a higher performance and can run at a higher clock frequency
of 850 MHz at OPP_HIGH instead of 750 MHz. Fix up the logic to use the
correct clock rates on these SoCs. Note that this higher clock rate is
not applicable to other Jacinto 6 Plus SoCs (DRA75xP/DRA74xP SoCs or
AM574x SoCs) that follow the ABZ package.

Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-09 14:00:24 -05:00

312 lines
7.9 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2016 Texas Instruments, Inc.
*/
#include <common.h>
#include <linux/libfdt.h>
#include <fdt_support.h>
#include <malloc.h>
#include <asm/omap_common.h>
#include <asm/arch-omap5/sys_proto.h>
#ifdef CONFIG_TI_SECURE_DEVICE
/* Give zero values if not already defined */
#ifndef TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ
#define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ (0)
#endif
#ifndef CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ
#define CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ (0)
#endif
static u32 hs_irq_skip[] = {
8, /* Secure violation reporting interrupt */
15, /* One interrupt for SDMA by secure world */
118 /* One interrupt for Crypto DMA by secure world */
};
static int ft_hs_fixup_crossbar(void *fdt, bd_t *bd)
{
const char *path;
int offs;
int ret;
int len, i, old_cnt, new_cnt;
u32 *temp;
const u32 *p_data;
/*
* Increase the size of the fdt
* so we have some breathing room
*/
ret = fdt_increase_size(fdt, 512);
if (ret < 0) {
printf("Could not increase size of device tree: %s\n",
fdt_strerror(ret));
return ret;
}
/* Reserve IRQs that are used/needed by secure world */
path = "/ocp/crossbar";
offs = fdt_path_offset(fdt, path);
if (offs < 0) {
debug("Node %s not found.\n", path);
return 0;
}
/* Get current entries */
p_data = fdt_getprop(fdt, offs, "ti,irqs-skip", &len);
if (p_data)
old_cnt = len / sizeof(u32);
else
old_cnt = 0;
new_cnt = sizeof(hs_irq_skip) /
sizeof(hs_irq_skip[0]);
/* Create new/updated skip list for HS parts */
temp = malloc(sizeof(u32) * (old_cnt + new_cnt));
for (i = 0; i < new_cnt; i++)
temp[i] = cpu_to_fdt32(hs_irq_skip[i]);
for (i = 0; i < old_cnt; i++)
temp[i + new_cnt] = p_data[i];
/* Blow away old data and set new data */
fdt_delprop(fdt, offs, "ti,irqs-skip");
ret = fdt_setprop(fdt, offs, "ti,irqs-skip",
temp,
(old_cnt + new_cnt) * sizeof(u32));
free(temp);
/* Check if the update worked */
if (ret < 0) {
printf("Could not add ti,irqs-skip property to node %s: %s\n",
path, fdt_strerror(ret));
return ret;
}
return 0;
}
#if ((TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ != 0) || \
(CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ != 0))
static int ft_hs_fixup_sram(void *fdt, bd_t *bd)
{
const char *path;
int offs;
int ret;
u32 temp[2];
/*
* Update SRAM reservations on secure devices. The OCMC RAM
* is always reserved for secure use from the start of that
* memory region
*/
path = "/ocp/ocmcram@40300000/sram-hs";
offs = fdt_path_offset(fdt, path);
if (offs < 0) {
debug("Node %s not found.\n", path);
return 0;
}
/* relative start offset */
temp[0] = cpu_to_fdt32(0);
/* reservation size */
temp[1] = cpu_to_fdt32(max(TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ,
CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ));
fdt_delprop(fdt, offs, "reg");
ret = fdt_setprop(fdt, offs, "reg", temp, 2 * sizeof(u32));
if (ret < 0) {
printf("Could not add reg property to node %s: %s\n",
path, fdt_strerror(ret));
return ret;
}
return 0;
}
#else
static int ft_hs_fixup_sram(void *fdt, bd_t *bd) { return 0; }
#endif
static void ft_hs_fixups(void *fdt, bd_t *bd)
{
/* Check we are running on an HS/EMU device type */
if (GP_DEVICE != get_device_type()) {
if ((ft_hs_fixup_crossbar(fdt, bd) == 0) &&
(ft_hs_disable_rng(fdt, bd) == 0) &&
(ft_hs_fixup_sram(fdt, bd) == 0) &&
(ft_hs_fixup_dram(fdt, bd) == 0) &&
(ft_hs_add_tee(fdt, bd) == 0))
return;
} else {
printf("ERROR: Incorrect device type (GP) detected!");
}
/* Fixup failed or wrong device type */
hang();
}
#else
static void ft_hs_fixups(void *fdt, bd_t *bd)
{
}
#endif /* #ifdef CONFIG_TI_SECURE_DEVICE */
#if defined(CONFIG_TARGET_DRA7XX_EVM) || defined(CONFIG_TARGET_AM57XX_EVM)
#define OPP_DSP_CLK_NUM 3
#define OPP_IVA_CLK_NUM 2
#define OPP_GPU_CLK_NUM 2
const char *dra7_opp_dsp_clk_names[OPP_DSP_CLK_NUM] = {
"dpll_dsp_ck",
"dpll_dsp_m2_ck",
"dpll_dsp_m3x2_ck",
};
const char *dra7_opp_iva_clk_names[OPP_IVA_CLK_NUM] = {
"dpll_iva_ck",
"dpll_iva_m2_ck",
};
const char *dra7_opp_gpu_clk_names[OPP_GPU_CLK_NUM] = {
"dpll_gpu_ck",
"dpll_gpu_m2_ck",
};
/* DSPEVE voltage domain */
u32 dra7_opp_dsp_clk_rates[NUM_OPPS][OPP_DSP_CLK_NUM] = {
{}, /*OPP_LOW */
{600000000, 600000000, 400000000}, /* OPP_NOM */
{700000000, 700000000, 466666667}, /* OPP_OD */
{750000000, 750000000, 500000000}, /* OPP_HIGH */
};
/* DSP clock rates on DRA76x ACD-package based SoCs */
u32 dra76_opp_dsp_clk_rates[NUM_OPPS][OPP_DSP_CLK_NUM] = {
{}, /* OPP_LOW */
{600000000, 600000000, 400000000}, /* OPP_NOM */
{700000000, 700000000, 466666667}, /* OPP_OD */
{850000000, 850000000, 566666667}, /* OPP_HIGH */
};
/* IVA voltage domain */
u32 dra7_opp_iva_clk_rates[NUM_OPPS][OPP_IVA_CLK_NUM] = {
{}, /* OPP_LOW */
{1165000000, 388333334}, /* OPP_NOM */
{860000000, 430000000}, /* OPP_OD */
{1064000000, 532000000}, /* OPP_HIGH */
};
/* GPU voltage domain */
u32 dra7_opp_gpu_clk_rates[NUM_OPPS][OPP_GPU_CLK_NUM] = {
{}, /* OPP_LOW */
{1277000000, 425666667}, /* OPP_NOM */
{1000000000, 500000000}, /* OPP_OD */
{1064000000, 532000000}, /* OPP_HIGH */
};
static int ft_fixup_clocks(void *fdt, const char **names, u32 *rates, int num)
{
int offs, node_offs, ret, i;
uint32_t phandle;
offs = fdt_path_offset(fdt, "/ocp/interconnect@4a000000/segment@0/target-module@5000/cm_core_aon@0/clocks");
if (offs < 0)
offs = fdt_path_offset(fdt, "/ocp/l4@4a000000/cm_core_aon@5000/clocks");
if (offs < 0) {
debug("Could not find cm_core_aon clocks node path offset : %s\n",
fdt_strerror(offs));
return offs;
}
for (i = 0; i < num; i++) {
node_offs = fdt_subnode_offset(fdt, offs, names[i]);
if (node_offs < 0) {
debug("Could not find clock sub-node %s: %s\n",
names[i], fdt_strerror(node_offs));
return offs;
}
phandle = fdt_get_phandle(fdt, node_offs);
if (!phandle) {
debug("Could not find phandle for clock %s\n",
names[i]);
return -1;
}
ret = fdt_setprop_u32(fdt, node_offs, "assigned-clocks",
phandle);
if (ret < 0) {
debug("Could not add assigned-clocks property to clock node %s: %s\n",
names[i], fdt_strerror(ret));
return ret;
}
ret = fdt_setprop_u32(fdt, node_offs, "assigned-clock-rates",
rates[i]);
if (ret < 0) {
debug("Could not add assigned-clock-rates property to clock node %s: %s\n",
names[i], fdt_strerror(ret));
return ret;
}
}
return 0;
}
static void ft_opp_clock_fixups(void *fdt, bd_t *bd)
{
const char **clk_names;
u32 *clk_rates;
int ret;
if (!is_dra72x() && !is_dra7xx())
return;
/* fixup DSP clocks */
clk_names = dra7_opp_dsp_clk_names;
clk_rates = dra7_opp_dsp_clk_rates[get_voltrail_opp(VOLT_EVE)];
/* adjust for higher OPP_HIGH clock rate on DRA76xP/DRA77xP SoCs */
if (is_dra76x_acd())
clk_rates = dra76_opp_dsp_clk_rates[get_voltrail_opp(VOLT_EVE)];
ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_DSP_CLK_NUM);
if (ret) {
printf("ft_fixup_clocks failed for DSP voltage domain: %s\n",
fdt_strerror(ret));
return;
}
/* fixup IVA clocks */
clk_names = dra7_opp_iva_clk_names;
clk_rates = dra7_opp_iva_clk_rates[get_voltrail_opp(VOLT_IVA)];
ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_IVA_CLK_NUM);
if (ret) {
printf("ft_fixup_clocks failed for IVA voltage domain: %s\n",
fdt_strerror(ret));
return;
}
/* fixup GPU clocks */
clk_names = dra7_opp_gpu_clk_names;
clk_rates = dra7_opp_gpu_clk_rates[get_voltrail_opp(VOLT_GPU)];
ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_GPU_CLK_NUM);
if (ret) {
printf("ft_fixup_clocks failed for GPU voltage domain: %s\n",
fdt_strerror(ret));
return;
}
}
#else
static void ft_opp_clock_fixups(void *fdt, bd_t *bd) { }
#endif /* CONFIG_TARGET_DRA7XX_EVM || CONFIG_TARGET_AM57XX_EVM */
/*
* Place for general cpu/SoC FDT fixups. Board specific
* fixups should remain in the board files which is where
* this function should be called from.
*/
void ft_cpu_setup(void *fdt, bd_t *bd)
{
ft_hs_fixups(fdt, bd);
ft_opp_clock_fixups(fdt, bd);
}