ARM: DRA7: Fixup DSPEVE, IVA and GPU clock frequencies based on OPP

This patch adds support to update the device-tree blob to adjust the
DSP and IVA DPLL clocks pertinent to the selected OPP choice, with
the default being OPP_NOM. The voltage settings are done in u-boot,
but the actual clock configuration itself is done in kernel because
of the following reasons:
1. SoC definition constraints us to NOT to do dynamic voltage
   scaling ever after the initial avs0 setting in bootloader
   - so the voltage must be set in bootloader.
2. The voltage level must be set even if the IP blocks like
   GPU/DSP are unused.
3. The IVA, GPU and DSP DPLLs are not essential for u-boot functionality,
   and similar DPLL clock configuration code has been cleaned up in
   v2014.10 u-boot release. See commit, 02c41535b6 ("ARM: OMAP4/5:
   Remove dead code against CONFIG_SYS_CLOCKS_ENABLE_ALL").

The non-essential DPLLs are configured within the kernel during
the clock init step when parsing the device tree and creating
the clock devices. This approach meets both the u-boot and kernel
needs.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Subhajit Paul <subhajit_paul@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Suman Anna 2016-11-23 12:54:41 +05:30 committed by Tom Rini
parent fba82eb7c9
commit 1b42ab3eda

View file

@ -266,6 +266,141 @@ static void ft_hs_fixups(void *fdt, bd_t *bd)
}
#endif /* #ifdef CONFIG_TI_SECURE_DEVICE */
#if defined(CONFIG_TARGET_DRA7XX_EVM) || defined(CONFIG_TARGET_AM57XX_EVM)
#define OPP_DSP_CLK_NUM 3
#define OPP_IVA_CLK_NUM 2
#define OPP_GPU_CLK_NUM 2
const char *dra7_opp_dsp_clk_names[OPP_DSP_CLK_NUM] = {
"dpll_dsp_ck",
"dpll_dsp_m2_ck",
"dpll_dsp_m3x2_ck",
};
const char *dra7_opp_iva_clk_names[OPP_IVA_CLK_NUM] = {
"dpll_iva_ck",
"dpll_iva_m2_ck",
};
const char *dra7_opp_gpu_clk_names[OPP_GPU_CLK_NUM] = {
"dpll_gpu_ck",
"dpll_gpu_m2_ck",
};
/* DSPEVE voltage domain */
u32 dra7_opp_dsp_clk_rates[NUM_OPPS][OPP_DSP_CLK_NUM] = {
{}, /*OPP_LOW */
{600000000, 600000000, 400000000}, /* OPP_NOM */
{700000000, 700000000, 466666667}, /* OPP_OD */
{750000000, 750000000, 500000000}, /* OPP_HIGH */
};
/* IVA voltage domain */
u32 dra7_opp_iva_clk_rates[NUM_OPPS][OPP_IVA_CLK_NUM] = {
{}, /* OPP_LOW */
{1165000000, 388333334}, /* OPP_NOM */
{860000000, 430000000}, /* OPP_OD */
{1064000000, 532000000}, /* OPP_HIGH */
};
/* GPU voltage domain */
u32 dra7_opp_gpu_clk_rates[NUM_OPPS][OPP_GPU_CLK_NUM] = {
{}, /* OPP_LOW */
{1277000000, 425666667}, /* OPP_NOM */
{1000000000, 500000000}, /* OPP_OD */
{1064000000, 532000000}, /* OPP_HIGH */
};
static int ft_fixup_clocks(void *fdt, const char **names, u32 *rates, int num)
{
int offs, node_offs, ret, i;
uint32_t phandle;
offs = fdt_path_offset(fdt, "/ocp/l4@4a000000/cm_core_aon@5000/clocks");
if (offs < 0) {
debug("Could not find cm_core_aon clocks node path offset : %s\n",
fdt_strerror(offs));
return offs;
}
for (i = 0; i < num; i++) {
node_offs = fdt_subnode_offset(fdt, offs, names[i]);
if (node_offs < 0) {
debug("Could not find clock sub-node %s: %s\n",
names[i], fdt_strerror(node_offs));
return offs;
}
phandle = fdt_get_phandle(fdt, node_offs);
if (!phandle) {
debug("Could not find phandle for clock %s\n",
names[i]);
return -1;
}
ret = fdt_setprop_u32(fdt, node_offs, "assigned-clocks",
phandle);
if (ret < 0) {
debug("Could not add assigned-clocks property to clock node %s: %s\n",
names[i], fdt_strerror(ret));
return ret;
}
ret = fdt_setprop_u32(fdt, node_offs, "assigned-clock-rates",
rates[i]);
if (ret < 0) {
debug("Could not add assigned-clock-rates property to clock node %s: %s\n",
names[i], fdt_strerror(ret));
return ret;
}
}
return 0;
}
static void ft_opp_clock_fixups(void *fdt, bd_t *bd)
{
const char **clk_names;
u32 *clk_rates;
int ret;
if (!is_dra72x() && !is_dra7xx())
return;
/* fixup DSP clocks */
clk_names = dra7_opp_dsp_clk_names;
clk_rates = dra7_opp_dsp_clk_rates[get_voltrail_opp(VOLT_EVE)];
ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_DSP_CLK_NUM);
if (ret) {
printf("ft_fixup_clocks failed for DSP voltage domain: %s\n",
fdt_strerror(ret));
return;
}
/* fixup IVA clocks */
clk_names = dra7_opp_iva_clk_names;
clk_rates = dra7_opp_iva_clk_rates[get_voltrail_opp(VOLT_IVA)];
ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_IVA_CLK_NUM);
if (ret) {
printf("ft_fixup_clocks failed for IVA voltage domain: %s\n",
fdt_strerror(ret));
return;
}
/* fixup GPU clocks */
clk_names = dra7_opp_gpu_clk_names;
clk_rates = dra7_opp_gpu_clk_rates[get_voltrail_opp(VOLT_GPU)];
ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_GPU_CLK_NUM);
if (ret) {
printf("ft_fixup_clocks failed for GPU voltage domain: %s\n",
fdt_strerror(ret));
return;
}
}
#else
static void ft_opp_clock_fixups(void *fdt, bd_t *bd) { }
#endif /* CONFIG_TARGET_DRA7XX_EVM || CONFIG_TARGET_AM57XX_EVM */
/*
* Place for general cpu/SoC FDT fixups. Board specific
* fixups should remain in the board files which is where
@ -274,4 +409,5 @@ static void ft_hs_fixups(void *fdt, bd_t *bd)
void ft_cpu_setup(void *fdt, bd_t *bd)
{
ft_hs_fixups(fdt, bd);
ft_opp_clock_fixups(fdt, bd);
}