Jagan Teki 47627c8a5c ram: rk3399: Avoid two channel ZQ Cal Start at the same time ... It is possible in lpddr4 dram, where both the channels would start at same time with ZQ Cal Start. If it uses ZQ Call start then it will use RZQ. For example LPDDR4 366 Dual-Die, Quad-Channel Package, RZQ maybe connect to both channel. If ZQ Cal Start at the same time, it will use the same RZQ. It is not a problem of using RZQ in both the channels, but can not use at the same time. So, to avoid this, we have an option of dram tINIT3 value for increasing the frequency for channel 1. This patch increase the available tINIT3 with existing running dram frequency. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>		2019-07-20 23:59:44 +08:00
..
adc	adc: stm32: Fix warnings when compiling with W=1	2019-07-12 11:50:55 +02:00
ata	ata: fsl_ahci: Add sata DM support for Freescale powerpc socs	2019-05-23 19:53:09 +05:30
axi	drivers: cosmetic: Convert SPDX license tags to Linux Kernel style	2018-10-28 09:26:39 -04:00
bios_emulator	bios_emulator: remove assignment without effect	2018-07-23 14:33:21 -04:00
block	blk: Invalidate block cache when switching hwpart	2019-07-18 11:31:31 -04:00
board	board: gazerbeam: Fix SC detection	2019-05-21 08:03:38 +02:00
bootcount	bootcount: add a DM RTC backing store for bootcount	2018-12-10 10:04:45 +01:00
cache	dm: cache: add the pl310 cache controller driver	2019-05-05 08:48:50 -04:00
clk	clk: rockchip: rk3399: Fix check patch warnings and checks	2019-07-19 11:11:09 +08:00
core	regmap: Add API regmap_init_mem_index()	2019-07-17 11:12:08 -04:00
cpu	cpu: Bind timer driver for boot hart	2019-02-27 09:12:33 +08:00
crypto	Revert "drivers/crypto/fsl: assign job-rings to non-TrustZone"	2019-06-11 10:42:48 +02:00
ddr	mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASE	2019-05-21 07:52:33 +02:00
demo	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
dfu	dfu: mmc: call fs functions instead of run_command	2019-01-30 21:22:53 -05:00
dma	CONFIG_SPL_SYS_[DI]CACHE_OFF: add	2019-05-18 08:15:35 -04:00
fastboot	fastboot: Check if partition really exist in getvar_has_slot()	2019-06-14 12:39:54 +02:00
firmware	firmware: ti_sci: Always request response from firmware	2019-05-03 07:23:17 -04:00
fpga	spl: socfpga: Implement fpga bitstream loading with socfpga loadfs	2019-05-10 22:48:11 +02:00
gpio	Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi	2019-07-16 11:19:31 -04:00
hwspinlock	hwspinlock: add stm32 hardware spinlock support	2018-12-06 23:26:33 -05:00
i2c	i2c: omap24xx_i2c: Adapt driver to support K3 devices	2019-07-17 11:12:54 -04:00
input	Kconfig: tegra: Migrate TEGRA_KEYBOARD	2019-02-20 09:01:45 -07:00
led	led: bcm6858: allow to use this driver on ARCH_963158	2019-04-23 17:57:22 -04:00
mailbox	mailbox: introduce stm32-ipcc driver	2019-07-12 11:18:53 +02:00
memory	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
misc	- syscon: add support for power off	2019-07-14 09:09:49 -04:00
mmc	mmc: am654_sdhci: Allow driver to probe without PDs specified	2019-07-17 11:12:54 -04:00
mtd	mtd: rawnand: stm32_fmc2: avoid warnings when building with W=1 option	2019-07-12 11:50:57 +02:00
net	net: macb: Add support for 1000-baseX	2019-07-15 13:32:26 -05:00
nvme	nvme: Fix warning of cast from pointer to integer of different size	2019-05-19 16:17:33 +08:00
pch	pch: Add ioctl support	2019-02-20 15:27:08 +08:00
pci	pci: ensure enumeration of all devices in pci_init	2019-07-12 21:07:58 -04:00
pci_endpoint	pci_ep: fix wrong addressing to barno	2019-07-18 11:31:32 -04:00
pcmcia	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
phy	sunxi: phy: Add USB PHY support for Allwinner H6	2019-07-16 17:13:15 +05:30
pinctrl	- syscon: add support for power off	2019-07-14 09:09:49 -04:00
power	regulator: Allow enabling GPIO regulator	2019-07-18 11:31:25 -04:00
pwm	rockchip: use 'arch-rockchip' as header file path	2019-05-01 00:00:05 +02:00
qe	configs: Migrate CONFIG_FMAN_ENET and some related options to Kconfig	2019-05-26 14:40:50 -04:00
ram	ram: rk3399: Avoid two channel ZQ Cal Start at the same time	2019-07-20 23:59:44 +08:00
remoteproc	remoteproc: k3_system_controller: Increase rx timeout	2019-05-09 20:22:05 -04:00
reset	reset: socfpga: convert to livetree	2019-05-10 22:48:11 +02:00
rtc	rtc: Add DM support to ds3231	2019-07-18 11:31:23 -04:00
scsi	dm: scsi: report correct device number	2019-02-19 08:55:43 -05:00
serial	- syscon: add support for power off	2019-07-14 09:09:49 -04:00
smem	drivers: smem: sandbox	2018-07-19 16:31:38 -04:00
soc	soc: keystone: Merge into ti specific directory	2019-04-11 20:07:12 -04:00
sound	sound: tegra: Add a sound driver	2019-05-24 10:14:10 -07:00
spi	- syscon: add support for power off	2019-07-14 09:09:49 -04:00
spmi	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
sysreset	- syscon: add support for power off	2019-07-14 09:09:49 -04:00
tee	test/py: avb: fix test_avb_persistent_values fail	2019-05-09 19:52:55 -04:00
thermal	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
timer	timer: dw-apb: remove unused DECLARE_GLOBAL_DATA_PTR	2019-05-10 22:48:11 +02:00
tpm	tpm: wait for valid status	2019-07-11 14:11:18 -04:00
usb	rockchip: xhci: Remove RK3399 support	2019-07-19 11:11:09 +08:00
video	fdt: Allow indicating a node is for U-Boot proper only	2019-07-10 16:52:58 -06:00
virtio	virtio: Add a Sandbox transport driver	2018-11-14 09:16:28 -08:00
w1	w1: Add driver for i.MX bus master controller	2019-01-01 14:12:18 +01:00
w1-eeprom	w1-eeprom: Add support for Maxim DS2502 add only memory	2018-11-16 16:51:55 -05:00
watchdog	watchdog: tangier: Convert to use WDT class	2019-06-22 22:27:13 +08:00
Kconfig	drivers: pci_ep: Introduce UCLASS_PCI_EP uclass	2019-07-11 10:05:15 -04:00
Makefile	drivers: pci_ep: Introduce UCLASS_PCI_EP uclass	2019-07-11 10:05:15 -04:00