mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
530f29cba5
The Linux PLIC interrupt-controller driver actually initializes the hart context registers in the PLIC driver exactly in the same order as specified in the interrupts-extended device tree property. See the device tree binding [1]. The ordering of the interrupts is therefore essential in order to configure the PLIC correctly. Fix the order so that we will have sane IRQ behavior when booting Linux with the u-boot device tree. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
634 lines
16 KiB
Text
634 lines
16 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
|
|
*/
|
|
|
|
#include <dt-bindings/clock/k210-sysctl.h>
|
|
#include <dt-bindings/mfd/k210-sysctl.h>
|
|
#include <dt-bindings/pinctrl/k210-pinctrl.h>
|
|
#include <dt-bindings/reset/k210-sysctl.h>
|
|
|
|
/ {
|
|
/*
|
|
* Although the K210 is a 64-bit CPU, the address bus is only 32-bits
|
|
* wide, and the upper half of all addresses is ignored.
|
|
*/
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "canaan,kendryte-k210";
|
|
|
|
aliases {
|
|
cpu0 = &cpu0;
|
|
cpu1 = &cpu1;
|
|
dma0 = &dmac0;
|
|
gpio0 = &gpio0;
|
|
gpio1 = &gpio1_0;
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
pinctrl0 = &fpioa;
|
|
serial0 = &uarths0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
spi0 = &spi0;
|
|
spi1 = &spi1;
|
|
spi2 = &spi2;
|
|
spi3 = &spi3;
|
|
timer0 = &timer0;
|
|
timer1 = &timer1;
|
|
timer2 = &timer2;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
timebase-frequency = <7800000>;
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "canaan,k210", "sifive,rocket0", "riscv";
|
|
reg = <0>;
|
|
riscv,isa = "rv64imafdgc";
|
|
mmu-type = "sv39";
|
|
i-cache-block-size = <64>;
|
|
i-cache-size = <0x8000>;
|
|
d-cache-block-size = <64>;
|
|
d-cache-size = <0x8000>;
|
|
clocks = <&sysclk K210_CLK_CPU>;
|
|
cpu0_intc: interrupt-controller {
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
compatible = "riscv,cpu-intc";
|
|
};
|
|
};
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "canaan,k210", "sifive,rocket0", "riscv";
|
|
reg = <1>;
|
|
riscv,isa = "rv64imafdgc";
|
|
mmu-type = "sv39";
|
|
i-cache-block-size = <64>;
|
|
i-cache-size = <0x8000>;
|
|
d-cache-block-size = <64>;
|
|
d-cache-size = <0x8000>;
|
|
clocks = <&sysclk K210_CLK_CPU>;
|
|
cpu1_intc: interrupt-controller {
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
compatible = "riscv,cpu-intc";
|
|
};
|
|
};
|
|
};
|
|
|
|
sram: memory@80000000 {
|
|
device_type = "memory";
|
|
compatible = "canaan,k210-sram";
|
|
reg = <0x80000000 0x400000>,
|
|
<0x80400000 0x200000>,
|
|
<0x80600000 0x200000>;
|
|
reg-names = "sram0", "sram1", "aisram";
|
|
clocks = <&sysclk K210_CLK_SRAM0>,
|
|
<&sysclk K210_CLK_SRAM1>,
|
|
<&sysclk K210_CLK_AI>;
|
|
clock-names = "sram0", "sram1", "aisram";
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
clocks {
|
|
in0: osc {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <26000000>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "canaan,k210-soc", "simple-bus";
|
|
ranges;
|
|
interrupt-parent = <&plic0>;
|
|
|
|
debug0: debug@0 {
|
|
compatible = "canaan,k210-debug", "riscv,debug";
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
rom0: nvmem@1000 {
|
|
reg = <0x1000 0x1000>;
|
|
read-only;
|
|
};
|
|
|
|
clint0: clint@2000000 {
|
|
#interrupt-cells = <1>;
|
|
compatible = "canaan,k210-clint", "sifive,clint0", "riscv,clint0";
|
|
reg = <0x2000000 0xC000>;
|
|
interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
|
|
<&cpu1_intc 3>, <&cpu1_intc 7>;
|
|
clocks = <&sysclk K210_CLK_CLINT>;
|
|
};
|
|
|
|
plic0: interrupt-controller@C000000 {
|
|
#interrupt-cells = <1>;
|
|
compatible = "canaan,k210-plic", "sifive,plic-1.0.0", "riscv,plic0";
|
|
reg = <0xC000000 0x4000000>;
|
|
interrupt-controller;
|
|
interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
|
|
<&cpu1_intc 11>, <&cpu1_intc 9>;
|
|
riscv,ndev = <65>;
|
|
riscv,max-priority = <7>;
|
|
};
|
|
|
|
uarths0: serial@38000000 {
|
|
compatible = "canaan,k210-uarths", "sifive,uart0";
|
|
reg = <0x38000000 0x1000>;
|
|
interrupts = <33>;
|
|
clocks = <&sysclk K210_CLK_CPU>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio-controller@38001000 {
|
|
#interrupt-cells = <2>;
|
|
#gpio-cells = <2>;
|
|
compatible = "canaan,k210-gpiohs", "sifive,gpio0";
|
|
reg = <0x38001000 0x1000>;
|
|
interrupt-controller;
|
|
interrupts = <34 35 36 37 38 39 40 41
|
|
42 43 44 45 46 47 48 49
|
|
50 51 52 53 54 55 56 57
|
|
58 59 60 61 62 63 64 65>;
|
|
gpio-controller;
|
|
ngpios = <32>;
|
|
status = "disabled";
|
|
};
|
|
|
|
kpu0: kpu@40800000 {
|
|
compatible = "canaan,k210-kpu";
|
|
reg = <0x40800000 0xc00000>;
|
|
interrupts = <25>;
|
|
clocks = <&sysclk K210_CLK_AI>;
|
|
status = "disabled";
|
|
};
|
|
|
|
fft0: fft@42000000 {
|
|
compatible = "canaan,k210-fft";
|
|
reg = <0x42000000 0x400000>;
|
|
interrupts = <26>;
|
|
clocks = <&sysclk K210_CLK_FFT>;
|
|
resets = <&sysrst K210_RST_FFT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dmac0: dma-controller@50000000 {
|
|
compatible = "canaan,k210-dmac", "snps,axi-dma-1.01a";
|
|
reg = <0x50000000 0x1000>;
|
|
interrupts = <27 28 29 30 31 32>;
|
|
clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
|
|
clock-names = "core-clk", "cfgr-clk";
|
|
resets = <&sysrst K210_RST_DMA>;
|
|
dma-channels = <6>;
|
|
snps,dma-masters = <2>;
|
|
snps,data-width = <5>;
|
|
snps,block-size = <0x200000 0x200000 0x200000
|
|
0x200000 0x200000 0x200000>;
|
|
snps,axi-max-burst-len = <256>;
|
|
status = "disabled";
|
|
};
|
|
|
|
apb0: bus@50200000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "canaan,k210-apb", "simple-pm-bus";
|
|
ranges;
|
|
clocks = <&sysclk K210_CLK_APB0>;
|
|
|
|
gpio1: gpio-controller@50200000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "canaan,k210-gpio",
|
|
"snps,dw-apb-gpio";
|
|
reg = <0x50200000 0x80>;
|
|
clocks = <&sysclk K210_CLK_APB0>,
|
|
<&sysclk K210_CLK_GPIO>;
|
|
clock-names = "bus", "db";
|
|
resets = <&sysrst K210_RST_GPIO>;
|
|
status = "disabled";
|
|
|
|
gpio1_0: gpio1@0 {
|
|
#gpio-cells = <2>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
interrupts = <23>;
|
|
gpio-controller;
|
|
snps,nr-gpios = <8>;
|
|
};
|
|
};
|
|
|
|
uart1: serial@50210000 {
|
|
compatible = "canaan,k210-uart",
|
|
"snps,dw-apb-uart";
|
|
reg = <0x50210000 0x100>;
|
|
interrupts = <11>;
|
|
clocks = <&sysclk K210_CLK_UART1>,
|
|
<&sysclk K210_CLK_APB0>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
resets = <&sysrst K210_RST_UART1>;
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
dcd-override;
|
|
dsr-override;
|
|
cts-override;
|
|
ri-override;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@50220000 {
|
|
compatible = "canaan,k210-uart",
|
|
"snps,dw-apb-uart";
|
|
reg = <0x50220000 0x100>;
|
|
interrupts = <12>;
|
|
clocks = <&sysclk K210_CLK_UART2>,
|
|
<&sysclk K210_CLK_APB0>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
resets = <&sysrst K210_RST_UART2>;
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
dcd-override;
|
|
dsr-override;
|
|
cts-override;
|
|
ri-override;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@50230000 {
|
|
compatible = "canaan,k210-uart",
|
|
"snps,dw-apb-uart";
|
|
reg = <0x50230000 0x100>;
|
|
interrupts = <13>;
|
|
clocks = <&sysclk K210_CLK_UART3>,
|
|
<&sysclk K210_CLK_APB0>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
resets = <&sysrst K210_RST_UART3>;
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
dcd-override;
|
|
dsr-override;
|
|
cts-override;
|
|
ri-override;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi2: spi@50240000 {
|
|
compatible = "canaan,k210-spi",
|
|
"snps,dw-apb-ssi-4.01",
|
|
"snps,dw-apb-ssi";
|
|
spi-slave;
|
|
reg = <0x50240000 0x100>;
|
|
interrupts = <2>;
|
|
clocks = <&sysclk K210_CLK_SPI2>,
|
|
<&sysclk K210_CLK_APB0>;
|
|
clock-names = "ssi_clk", "pclk";
|
|
resets = <&sysrst K210_RST_SPI2>;
|
|
spi-max-frequency = <25000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s0: i2s@50250000 {
|
|
compatible = "canaan,k210-i2s",
|
|
"snps,designware-i2s";
|
|
reg = <0x50250000 0x200>;
|
|
interrupts = <5>;
|
|
clocks = <&sysclk K210_CLK_I2S0>;
|
|
clock-names = "i2sclk";
|
|
resets = <&sysrst K210_RST_I2S0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
apu0: sound@520250200 {
|
|
compatible = "canaan,k210-apu";
|
|
reg = <0x50250200 0x200>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s1: i2s@50260000 {
|
|
compatible = "canaan,k210-i2s",
|
|
"snps,designware-i2s";
|
|
reg = <0x50260000 0x200>;
|
|
interrupts = <6>;
|
|
clocks = <&sysclk K210_CLK_I2S1>;
|
|
clock-names = "i2sclk";
|
|
resets = <&sysrst K210_RST_I2S1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s2: i2s@50270000 {
|
|
compatible = "canaan,k210-i2s",
|
|
"snps,designware-i2s";
|
|
reg = <0x50270000 0x200>;
|
|
interrupts = <7>;
|
|
clocks = <&sysclk K210_CLK_I2S2>;
|
|
clock-names = "i2sclk";
|
|
resets = <&sysrst K210_RST_I2S2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@50280000 {
|
|
compatible = "canaan,k210-i2c",
|
|
"snps,designware-i2c";
|
|
reg = <0x50280000 0x100>;
|
|
interrupts = <8>;
|
|
clocks = <&sysclk K210_CLK_I2C0>,
|
|
<&sysclk K210_CLK_APB0>;
|
|
clock-names = "ref", "pclk";
|
|
resets = <&sysrst K210_RST_I2C0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@50290000 {
|
|
compatible = "canaan,k210-i2c",
|
|
"snps,designware-i2c";
|
|
reg = <0x50290000 0x100>;
|
|
interrupts = <9>;
|
|
clocks = <&sysclk K210_CLK_I2C1>,
|
|
<&sysclk K210_CLK_APB0>;
|
|
clock-names = "ref", "pclk";
|
|
resets = <&sysrst K210_RST_I2C1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@502A0000 {
|
|
compatible = "canaan,k210-i2c",
|
|
"snps,designware-i2c";
|
|
reg = <0x502A0000 0x100>;
|
|
interrupts = <10>;
|
|
clocks = <&sysclk K210_CLK_I2C2>,
|
|
<&sysclk K210_CLK_APB0>;
|
|
clock-names = "ref", "pclk";
|
|
resets = <&sysrst K210_RST_I2C2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
fpioa: pinmux@502B0000 {
|
|
compatible = "canaan,k210-fpioa";
|
|
reg = <0x502B0000 0x100>;
|
|
clocks = <&sysclk K210_CLK_FPIOA>,
|
|
<&sysclk K210_CLK_APB0>;
|
|
clock-names = "ref", "pclk";
|
|
resets = <&sysrst K210_RST_FPIOA>;
|
|
canaan,k210-sysctl-power = <&sysctl K210_SYSCTL_POWER_SEL>;
|
|
pinctrl-0 = <&fpioa_jtag>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
|
|
fpioa_jtag: jtag {
|
|
pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
|
|
<K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
|
|
<K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
|
|
<K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
|
|
};
|
|
};
|
|
|
|
sha256: sha256@502C0000 {
|
|
compatible = "canaan,k210-sha256";
|
|
reg = <0x502C0000 0x100>;
|
|
clocks = <&sysclk K210_CLK_SHA>;
|
|
resets = <&sysrst K210_RST_SHA>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer0: timer@502D0000 {
|
|
compatible = "canaan,k210-timer",
|
|
"snps,dw-apb-timer";
|
|
reg = <0x502D0000 0x100>;
|
|
interrupts = <14 15>;
|
|
clocks = <&sysclk K210_CLK_TIMER0>,
|
|
<&sysclk K210_CLK_APB0>;
|
|
clock-names = "timer", "pclk";
|
|
resets = <&sysrst K210_RST_TIMER0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer1: timer@502E0000 {
|
|
compatible = "canaan,k210-timer",
|
|
"snps,dw-apb-timer";
|
|
reg = <0x502E0000 0x100>;
|
|
interrupts = <16 17>;
|
|
clocks = <&sysclk K210_CLK_TIMER1>,
|
|
<&sysclk K210_CLK_APB0>;
|
|
clock-names = "timer", "pclk";
|
|
resets = <&sysrst K210_RST_TIMER1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer2: timer@502F0000 {
|
|
compatible = "canaan,k210-timer",
|
|
"snps,dw-apb-timer";
|
|
reg = <0x502F0000 0x100>;
|
|
interrupts = <18 19>;
|
|
clocks = <&sysclk K210_CLK_TIMER2>,
|
|
<&sysclk K210_CLK_APB0>;
|
|
clock-names = "timer", "pclk";
|
|
resets = <&sysrst K210_RST_TIMER2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
apb1: bus@50400000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "canaan,k210-apb", "simple-pm-bus";
|
|
ranges;
|
|
clocks = <&sysclk K210_CLK_APB1>;
|
|
|
|
wdt0: watchdog@50400000 {
|
|
compatible = "canaan,k210-wdt", "snps,dw-wdt";
|
|
reg = <0x50400000 0x100>;
|
|
interrupts = <21>;
|
|
clocks = <&sysclk K210_CLK_WDT0>,
|
|
<&sysclk K210_CLK_APB1>;
|
|
clock-names = "tclk", "pclk";
|
|
resets = <&sysrst K210_RST_WDT0>;
|
|
};
|
|
|
|
wdt1: watchdog@50410000 {
|
|
compatible = "canaan,k210-wdt", "snps,dw-wdt";
|
|
reg = <0x50410000 0x100>;
|
|
interrupts = <22>;
|
|
clocks = <&sysclk K210_CLK_WDT1>,
|
|
<&sysclk K210_CLK_APB1>;
|
|
clock-names = "tclk", "pclk";
|
|
resets = <&sysrst K210_RST_WDT1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
otp0: nvmem@50420000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "canaan,k210-otp";
|
|
reg = <0x50420000 0x100>,
|
|
<0x88000000 0x20000>;
|
|
reg-names = "reg", "mem";
|
|
clocks = <&sysclk K210_CLK_ROM>;
|
|
resets = <&sysrst K210_RST_ROM>;
|
|
read-only;
|
|
status = "disabled";
|
|
|
|
/* Bootloader */
|
|
firmware@00000 {
|
|
reg = <0x00000 0xC200>;
|
|
};
|
|
|
|
/*
|
|
* config string as described in RISC-V
|
|
* privileged spec 1.9
|
|
*/
|
|
config-1-9@1c000 {
|
|
reg = <0x1C000 0x1000>;
|
|
};
|
|
|
|
/*
|
|
* Device tree containing only registers,
|
|
* interrupts, and cpus
|
|
*/
|
|
fdt@1d000 {
|
|
reg = <0x1D000 0x2000>;
|
|
};
|
|
|
|
/* CPU/ROM credits */
|
|
credits@1f000 {
|
|
reg = <0x1F000 0x1000>;
|
|
};
|
|
};
|
|
|
|
dvp0: camera@50430000 {
|
|
compatible = "canaan,k210-dvp";
|
|
reg = <0x50430000 0x100>;
|
|
interrupts = <24>;
|
|
clocks = <&sysclk K210_CLK_DVP>;
|
|
resets = <&sysrst K210_RST_DVP>;
|
|
canaan,k210-sysctl = <&sysctl>;
|
|
canaan,k210-misc-offset = <K210_SYSCTL_MISC>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sysctl: syscon@50440000 {
|
|
compatible = "canaan,k210-sysctl",
|
|
"syscon", "simple-mfd";
|
|
reg = <0x50440000 0x100>;
|
|
clocks = <&sysclk K210_CLK_APB1>;
|
|
clock-names = "pclk";
|
|
reg-io-width = <4>;
|
|
u-boot,dm-pre-reloc;
|
|
|
|
sysclk: clock-controller {
|
|
#clock-cells = <1>;
|
|
compatible = "canaan,k210-clk";
|
|
clocks = <&in0>;
|
|
assigned-clocks = <&sysclk K210_CLK_PLL1>;
|
|
assigned-clock-rates = <390000000>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
sysrst: reset-controller {
|
|
compatible = "canaan,k210-rst",
|
|
"syscon-reset";
|
|
#reset-cells = <1>;
|
|
regmap = <&sysctl>;
|
|
offset = <K210_SYSCTL_PERI_RESET>;
|
|
mask = <0x27FFFFFF>;
|
|
assert-high = <1>;
|
|
};
|
|
|
|
reboot {
|
|
compatible = "syscon-reboot";
|
|
regmap = <&sysctl>;
|
|
offset = <K210_SYSCTL_SOFT_RESET>;
|
|
mask = <1>;
|
|
value = <1>;
|
|
};
|
|
};
|
|
|
|
aes0: aes@50450000 {
|
|
compatible = "canaan,k210-aes";
|
|
reg = <0x50450000 0x100>;
|
|
clocks = <&sysclk K210_CLK_AES>;
|
|
resets = <&sysrst K210_RST_AES>;
|
|
status = "disabled";
|
|
};
|
|
|
|
rtc: rtc@50460000 {
|
|
compatible = "canaan,k210-rtc";
|
|
reg = <0x50460000 0x100>;
|
|
clocks = <&in0>;
|
|
resets = <&sysrst K210_RST_RTC>;
|
|
interrupts = <20>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
apb2: bus@52000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "canaan,k210-apb", "simple-pm-bus";
|
|
ranges;
|
|
clocks = <&sysclk K210_CLK_APB2>;
|
|
|
|
spi0: spi@52000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "canaan,k210-spi",
|
|
"snps,dw-apb-ssi-4.01",
|
|
"snps,dw-apb-ssi";
|
|
reg = <0x52000000 0x100>;
|
|
interrupts = <1>;
|
|
clocks = <&sysclk K210_CLK_SPI0>,
|
|
<&sysclk K210_CLK_APB2>;
|
|
clock-names = "ssi_clk", "pclk";
|
|
resets = <&sysrst K210_RST_SPI0>;
|
|
spi-max-frequency = <25000000>;
|
|
num-cs = <4>;
|
|
reg-io-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@53000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "canaan,k210-spi",
|
|
"snps,dw-apb-ssi-4.01",
|
|
"snps,dw-apb-ssi";
|
|
reg = <0x53000000 0x100>;
|
|
interrupts = <2>;
|
|
clocks = <&sysclk K210_CLK_SPI1>,
|
|
<&sysclk K210_CLK_APB2>;
|
|
clock-names = "ssi_clk", "pclk";
|
|
resets = <&sysrst K210_RST_SPI1>;
|
|
spi-max-frequency = <25000000>;
|
|
num-cs = <4>;
|
|
reg-io-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi3: spi@54000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "canaan,k210-ssi",
|
|
"snps,dwc-ssi-1.01a";
|
|
reg = <0x54000000 0x200>;
|
|
interrupts = <4>;
|
|
clocks = <&sysclk K210_CLK_SPI3>,
|
|
<&sysclk K210_CLK_APB2>;
|
|
clock-names = "ssi_clk", "pclk";
|
|
resets = <&sysrst K210_RST_SPI3>;
|
|
/* Could possibly go up to 200 MHz */
|
|
spi-max-frequency = <100000000>;
|
|
num-cs = <4>;
|
|
reg-io-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
};
|