mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-30 03:12:07 +00:00
17baba4682
The Cubox has an unstable phy address - which can appear at either address 0 (intended) or 4 (unintended). SoM revision 1.9 has replaced the ar8035 phy with an adin1300, which will always appear at address 1. Change the reg property of the phy node to the magic value 0xffffffff, which indicates to the generic phy driver that all addresses should be probed. That allows the same node (which is pinned by phy-handle) to match either the AR8035 PHY at both possible addresses, as well as the new one at address 1. Also add the new adi,phy-output-clock property for enabling the 125MHz clock used by the fec ethernet controller, as submitted to Linux [1]. Linux solves this problem differently: For the ar8035 phy it will probe both phy nodes in device-tree in order, and use the one that succeeds. For the new adin1300 it expects U-Boot to patch the status field in the DTB before booting While at it also sync the reset-delay with the upstream Linux dtb. [1] https://patchwork.kernel.org/project/netdevbpf/patch/20220428082848.12191-4-josua@solid-run.com/ Signed-off-by: Josua Mayer <josua@solid-run.com> |
||
|---|---|---|
| .. | ||
| arc | ||
| arm | ||
| m68k | ||
| microblaze | ||
| mips | ||
| nios2 | ||
| powerpc | ||
| riscv | ||
| sandbox | ||
| sh | ||
| x86 | ||
| xtensa | ||
| .gitignore | ||
| Kconfig | ||
| u-boot-elf.lds | ||