Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-15 09:27:35 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/ge/b1x5v2/spl.c
Harald Seiler 35b65dd8ef reset: Remove addr parameter from reset_cpu() 
Historically, the reset_cpu() function had an `addr` parameter which was
meant to pass in an address of the reset vector location, where the CPU
should reset to.  This feature is no longer used anywhere in U-Boot as
all reset_cpu() implementations now ignore the passed value.  Generic
code has been added which always calls reset_cpu() with `0` which means
this feature can no longer be used easily anyway.

Over time, many implementations seem to have "misunderstood" the
existence of this parameter as a way to customize/parameterize the reset
(e.g.  COLD vs WARM resets).  As this is not properly supported, the
code will almost always not do what it is intended to (because all
call-sites just call reset_cpu() with 0).

To avoid confusion and to clean up the codebase from unused left-overs
of the past, remove the `addr` parameter entirely.  Code which intends
to support different kinds of resets should be rewritten as a sysreset
driver instead.

This transformation was done with the following coccinelle patch:

    @@
    expression argvalue;
    @@
    - reset_cpu(argvalue)
    + reset_cpu()

    @@
    identifier argname;
    type argtype;
    @@
    - reset_cpu(argtype argname)
    + reset_cpu(void)
    { ... }

Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-02 14:03:02 -05:00

587 lines
16 KiB
C
Raw Blame History

/*
* GE b1x5v2 - QMX6 SPL
*
* Copyright 2013, Adeneo Embedded <www.adeneo-embedded.com>
* Copyright 2018-2020 GE Inc.
* Copyright 2018-2020 Collabora Ltd.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <init.h>
#include <spi.h>
#include <spi_flash.h>
#include <spl.h>
#if defined(CONFIG_SPL_BUILD)
#include <asm/arch/mx6-ddr.h>
#define IMX6DQ_DRIVE_STRENGTH_40_OHM 0x30
#define IMX6DQ_DRIVE_STRENGTH_48_OHM 0x28
#define IMX6DQ_DRIVE_STRENGTH IMX6DQ_DRIVE_STRENGTH_40_OHM
#define QMX6_DDR_PKE_DISABLED 0x00000000
#define QMX6_DDR_ODT_60_OHM (2 << 16)
#define QMX6_DDR_TYPE_DDR3 0x000c0000
#define QMX6_DRAM_SDCKE_PULLUP_100K 0x00003000
#define QMX6_DRAM_SDBA2_PULLUP_NONE 0x00000000
#define SPI_PAD_CTRL (PAD_CTL_HYS | \
PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define SPI1_CS0 IMX_GPIO_NR(3, 19)
#define POWEROFF IMX_GPIO_NR(4, 25)
static iomux_v3_cfg_t const poweroff_pads[] = {
IOMUX_PADS(PAD_DISP0_DAT4__GPIO4_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static iomux_v3_cfg_t const uart2_pads[] = {
IOMUX_PADS(PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
};
static iomux_v3_cfg_t const uart3_pads[] = {
IOMUX_PADS(PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
};
static iomux_v3_cfg_t const ecspi1_pads[] = {
IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = {
.dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH,
.dram_cas = IMX6DQ_DRIVE_STRENGTH,
.dram_ras = IMX6DQ_DRIVE_STRENGTH,
.dram_reset = IMX6DQ_DRIVE_STRENGTH,
.dram_sdcke0 = QMX6_DRAM_SDCKE_PULLUP_100K,
.dram_sdcke1 = QMX6_DRAM_SDCKE_PULLUP_100K,
.dram_sdba2 = QMX6_DRAM_SDBA2_PULLUP_NONE,
.dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm0 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm1 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm2 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm3 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm4 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm5 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm6 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
};
static const struct mx6sdl_iomux_ddr_regs mx6dl_ddr_ioregs = {
.dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH,
.dram_cas = IMX6DQ_DRIVE_STRENGTH,
.dram_ras = IMX6DQ_DRIVE_STRENGTH,
.dram_reset = IMX6DQ_DRIVE_STRENGTH,
.dram_sdcke0 = QMX6_DRAM_SDCKE_PULLUP_100K,
.dram_sdcke1 = QMX6_DRAM_SDCKE_PULLUP_100K,
.dram_sdba2 = QMX6_DRAM_SDBA2_PULLUP_NONE,
.dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH,
.dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm0 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm1 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm2 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm3 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm4 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm5 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm6 = IMX6DQ_DRIVE_STRENGTH,
.dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
};
static struct mx6dq_iomux_grp_regs mx6q_grp_ioregs = {
.grp_ddr_type = QMX6_DDR_TYPE_DDR3,
.grp_ddrmode_ctl = QMX6_DDR_ODT_60_OHM,
.grp_ddrpke = QMX6_DDR_PKE_DISABLED,
.grp_addds = IMX6DQ_DRIVE_STRENGTH,
.grp_ctlds = IMX6DQ_DRIVE_STRENGTH,
.grp_ddrmode = QMX6_DDR_ODT_60_OHM,
.grp_b0ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b1ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b2ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b3ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b4ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b5ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b6ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
};
static const struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
.grp_ddr_type = QMX6_DDR_TYPE_DDR3,
.grp_ddrmode_ctl = QMX6_DDR_ODT_60_OHM,
.grp_ddrpke = QMX6_DDR_PKE_DISABLED,
.grp_addds = IMX6DQ_DRIVE_STRENGTH,
.grp_ctlds = IMX6DQ_DRIVE_STRENGTH,
.grp_ddrmode = QMX6_DDR_ODT_60_OHM,
.grp_b0ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b1ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b2ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b3ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b4ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b5ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b6ds = IMX6DQ_DRIVE_STRENGTH,
.grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
};
const struct mx6_mmdc_calibration mx6q_mmcd_calib = {
.p0_mpwldectrl0 = 0x0016001A,
.p0_mpwldectrl1 = 0x0023001C,
.p1_mpwldectrl0 = 0x0028003A,
.p1_mpwldectrl1 = 0x001F002C,
.p0_mpdgctrl0 = 0x43440354,
.p0_mpdgctrl1 = 0x033C033C,
.p1_mpdgctrl0 = 0x43300368,
.p1_mpdgctrl1 = 0x03500330,
.p0_mprddlctl = 0x3228242E,
.p1_mprddlctl = 0x2C2C2636,
.p0_mpwrdlctl = 0x36323A38,
.p1_mpwrdlctl = 0x42324440,
};
const struct mx6_mmdc_calibration mx6q_2g_mmcd_calib = {
.p0_mpwldectrl0 = 0x00080016,
.p0_mpwldectrl1 = 0x001D0016,
.p1_mpwldectrl0 = 0x0018002C,
.p1_mpwldectrl1 = 0x000D001D,
.p0_mpdgctrl0 = 0x43200334,
.p0_mpdgctrl1 = 0x0320031C,
.p1_mpdgctrl0 = 0x0344034C,
.p1_mpdgctrl1 = 0x03380314,
.p0_mprddlctl = 0x3E36383A,
.p1_mprddlctl = 0x38363240,
.p0_mpwrdlctl = 0x36364238,
.p1_mpwrdlctl = 0x4230423E,
};
const struct mx6_mmdc_calibration mx6q_4g_mmcd_calib = {
.p0_mpwldectrl0 = 0x00180018,
.p0_mpwldectrl1 = 0x00220018,
.p1_mpwldectrl0 = 0x00330046,
.p1_mpwldectrl1 = 0x002B003D,
.p0_mpdgctrl0 = 0x4344034C,
.p0_mpdgctrl1 = 0x033C033C,
.p1_mpdgctrl0 = 0x03700374,
.p1_mpdgctrl1 = 0x03600338,
.p0_mprddlctl = 0x443E3E40,
.p1_mprddlctl = 0x423E3E48,
.p0_mpwrdlctl = 0x3C3C4442,
.p1_mpwrdlctl = 0x46384C46,
};
static const struct mx6_mmdc_calibration mx6s_mmcd_calib = {
.p0_mpwldectrl0 = 0x00480049,
.p0_mpwldectrl1 = 0x00410044,
.p0_mpdgctrl0 = 0x42480248,
.p0_mpdgctrl1 = 0x023C023C,
.p0_mprddlctl = 0x40424644,
.p0_mpwrdlctl = 0x34323034,
};
static const struct mx6_mmdc_calibration mx6s_2g_mmcd_calib = {
.p0_mpwldectrl0 = 0x00450048,
.p0_mpwldectrl1 = 0x003B003F,
.p0_mpdgctrl0 = 0x424C0248,
.p0_mpdgctrl1 = 0x0234023C,
.p0_mprddlctl = 0x40444848,
.p0_mpwrdlctl = 0x38363232,
};
static const struct mx6_mmdc_calibration mx6dl_mmcd_calib = {
.p0_mpwldectrl0 = 0x0043004B,
.p0_mpwldectrl1 = 0x003A003E,
.p1_mpwldectrl0 = 0x0047004F,
.p1_mpwldectrl1 = 0x004E0061,
.p0_mpdgctrl0 = 0x42500250,
.p0_mpdgctrl1 = 0x0238023C,
.p1_mpdgctrl0 = 0x42640264,
.p1_mpdgctrl1 = 0x02500258,
.p0_mprddlctl = 0x40424846,
.p1_mprddlctl = 0x46484842,
.p0_mpwrdlctl = 0x38382C30,
.p1_mpwrdlctl = 0x34343430,
};
static const struct mx6_mmdc_calibration mx6dl_2g_mmcd_calib = {
.p0_mpwldectrl0 = 0x00450045,
.p0_mpwldectrl1 = 0x00390043,
.p1_mpwldectrl0 = 0x0049004D,
.p1_mpwldectrl1 = 0x004E0061,
.p0_mpdgctrl0 = 0x4240023C,
.p0_mpdgctrl1 = 0x0228022C,
.p1_mpdgctrl0 = 0x02400244,
.p1_mpdgctrl1 = 0x02340238,
.p0_mprddlctl = 0x42464648,
.p1_mprddlctl = 0x4446463C,
.p0_mpwrdlctl = 0x3C38323A,
.p1_mpwrdlctl = 0x34323430,
};
static struct mx6_ddr3_cfg mem_ddr_2g = {
.mem_speed = 1600,
.density = 2,
.width = 16,
.banks = 8,
.rowaddr = 14,
.coladdr = 10,
.pagesz = 2,
.trcd = 1310,
.trcmin = 4875,
.trasmin = 3500,
};
static struct mx6_ddr3_cfg mem_ddr_4g = {
.mem_speed = 1600,
.density = 4,
.width = 16,
.banks = 8,
.rowaddr = 15,
.coladdr = 10,
.pagesz = 2,
.trcd = 1310,
.trcmin = 4875,
.trasmin = 3500,
};
static struct mx6_ddr3_cfg mem_ddr_8g = {
.mem_speed = 1600,
.density = 8,
.width = 16,
.banks = 8,
.rowaddr = 16,
.coladdr = 10,
.pagesz = 2,
.trcd = 1310,
.trcmin = 4875,
.trasmin = 3500,
};
static void spl_dram_init(u8 width, u32 memsize) {
struct mx6_ddr_sysinfo sysinfo = {
/* width of data bus: 0=16, 1=32, 2=64 */
.dsize = width / 32,
/* config for full 4GB range so that get_mem_size() works */
.cs_density = 32, /* 32Gb per CS */
.ncs = 1,
.cs1_mirror = 0,
.rtt_wr = 2,
.rtt_nom = 2,
.walat = 0,
.ralat = 5,
.mif3_mode = 3,
.bi_on = 1,
.sde_to_rst = 0x0d,
.rst_to_cke = 0x20,
};
if (is_cpu_type(MXC_CPU_MX6SOLO)) {
sysinfo.walat = 1;
mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs);
switch(memsize) {
case 512:
mx6_dram_cfg(&sysinfo, &mx6s_2g_mmcd_calib, &mem_ddr_2g);
break;
default:
mx6_dram_cfg(&sysinfo, &mx6s_mmcd_calib, &mem_ddr_4g);
break;
}
} else if (is_cpu_type(MXC_CPU_MX6DL)) {
sysinfo.walat = 1;
mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs);
switch(memsize) {
case 2048:
mx6_dram_cfg(&sysinfo, &mx6dl_2g_mmcd_calib, &mem_ddr_4g);
break;
default:
mx6_dram_cfg(&sysinfo, &mx6dl_mmcd_calib, &mem_ddr_2g);
break;
}
} else if (is_cpu_type(MXC_CPU_MX6Q)) {
mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs);
switch(memsize) {
case 4096:
sysinfo.cs_density = 16;
sysinfo.ncs = 2;
mx6_dram_cfg(&sysinfo, &mx6q_4g_mmcd_calib, &mem_ddr_8g);
break;
case 2048:
mx6_dram_cfg(&sysinfo, &mx6q_2g_mmcd_calib, &mem_ddr_4g);
break;
default:
mx6_dram_cfg(&sysinfo, &mx6q_mmcd_calib, &mem_ddr_2g);
break;
}
}
}
/* Define a minimal structure so that the part number can be read via SPL */
#define CFG_MFG_ADDR_OFFSET (spi->size - SZ_16K)
struct mfgdata {
unsigned char tsize;
/* size of checksummed part in bytes */
unsigned char ckcnt;
/* checksum corrected byte */
unsigned char cksum;
/* decimal serial number, packed BCD */
unsigned char serial[6];
/* part number, right justified, ASCII */
unsigned char pn[16];
};
static void conv_ascii(unsigned char *dst, unsigned char *src, int len)
{
int remain = len;
unsigned char *sptr = src;
unsigned char *dptr = dst;
while (remain) {
if (*sptr) {
*dptr = *sptr;
dptr++;
}
sptr++;
remain--;
}
*dptr = 0x0;
}
/*
* Returns the total size of the memory [in MB] the board is equipped with
*
* This is determined via the partnumber which is stored in the
* congatec manufacturing area
*/
static int get_boardmem_size(struct spi_flash *spi)
{
int ret;
int i;
int arraysize;
char buf[sizeof(struct mfgdata)];
struct mfgdata *data = (struct mfgdata *)buf;
unsigned char outbuf[32];
char partnumbers_2g[4][7] = { "016104", "016105", "016304", "016305" };
char partnumbers_4g[2][7] = { "016308", "016318" };
char partnumbers_512m[2][7] = { "016203", "616300" };
ret = spi_flash_read(spi, CFG_MFG_ADDR_OFFSET, sizeof(struct mfgdata),
buf);
if (ret)
return 1024; /* default to 1GByte in case of error */
conv_ascii(outbuf, data->pn, sizeof(data->pn));
printf("Detected Congatec QMX6 SOM: %s\n", outbuf);
/* congatec PN 016104, 016105, 016304, 016305 have 2GiB of RAM */
arraysize = sizeof(partnumbers_2g) / sizeof(partnumbers_2g[0]);
for (i=0; i < arraysize; i++) {
if (!memcmp(outbuf,partnumbers_2g[i],6))
return 2048;
}
/* congatec PN 016308, 016318 have 4GiB of RAM */
arraysize = sizeof(partnumbers_4g) / sizeof(partnumbers_4g[0]);
for (i=0; i < arraysize; i++) {
if (!memcmp(outbuf,partnumbers_4g[i],6))
return 4096;
}
/* congatec PN 016203, 616300 has 512MiB of RAM */
arraysize = sizeof(partnumbers_512m) / sizeof(partnumbers_512m[0]);
for (i=0; i < arraysize; i++) {
if (!memcmp(outbuf,partnumbers_512m[i],6))
return 512;
}
/* default to 1GByte */
return 1024;
}
void reset_cpu(void)
{
}
int board_spi_cs_gpio(unsigned bus, unsigned cs)
{
if (bus == 0 && cs == 0)
return (SPI1_CS0);
else
return -1;
}
static void memory_init(void) {
struct spi_flash *spi;
u8 width;
u32 size;
SETUP_IOMUX_PADS(ecspi1_pads);
gpio_direction_output(SPI1_CS0, 0);
spi = spi_flash_probe(CONFIG_ENV_SPI_BUS,
CONFIG_ENV_SPI_CS,
CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
if (!spi)
panic("Cannot identify board type: SPI-NOR flash module not detected\n");
/* lock manufacturer area */
spi_flash_protect(spi, CFG_MFG_ADDR_OFFSET, SZ_16K, true);
width = is_cpu_type(MXC_CPU_MX6SOLO) ? 32 : 64;
size = get_boardmem_size(spi);
printf("Detected Memory Size: %u\n", size);
spl_dram_init(width, size);
}
static void ccgr_init(void)
{
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
static const uint32_t ccgr0 =
MXC_CCM_CCGR0_AIPS_TZ1_MASK |
MXC_CCM_CCGR0_AIPS_TZ2_MASK |
MXC_CCM_CCGR0_APBHDMA_MASK |
MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK |
MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK |
MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK |
MXC_CCM_CCGR0_CHEETAH_DBG_CLK_MASK;
static const uint32_t ccgr1 =
MXC_CCM_CCGR1_ECSPI1S_MASK |
MXC_CCM_CCGR1_ENET_MASK |
MXC_CCM_CCGR1_EPIT1S_MASK |
MXC_CCM_CCGR1_EPIT2S_MASK |
MXC_CCM_CCGR1_GPT_BUS_MASK;
static const uint32_t ccgr2 =
MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK |
MXC_CCM_CCGR2_IPMUX1_MASK |
MXC_CCM_CCGR2_IPMUX2_MASK |
MXC_CCM_CCGR2_IPMUX3_MASK |
MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_MASK |
MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_MASK |
MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK;
static const uint32_t ccgr3 =
MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_MASK |
MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_MASK |
MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_MASK |
MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_MASK |
MXC_CCM_CCGR3_OCRAM_MASK;
static const uint32_t ccgr4 =
MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_MASK |
MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK |
MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_MASK |
MXC_CCM_CCGR4_PWM1_MASK |
MXC_CCM_CCGR4_PWM2_MASK |
MXC_CCM_CCGR4_PWM3_MASK |
MXC_CCM_CCGR4_PWM4_MASK;
static const uint32_t ccgr5 =
MXC_CCM_CCGR5_ROM_MASK |
MXC_CCM_CCGR5_SDMA_MASK |
MXC_CCM_CCGR5_UART_MASK |
MXC_CCM_CCGR5_UART_SERIAL_MASK;
static const uint32_t ccgr6 =
MXC_CCM_CCGR6_USBOH3_MASK |
MXC_CCM_CCGR6_USDHC1_MASK |
MXC_CCM_CCGR6_USDHC2_MASK |
MXC_CCM_CCGR6_SIM1_CLK_MASK |
MXC_CCM_CCGR6_SIM2_CLK_MASK;
writel(ccgr0, &ccm->CCGR0);
writel(ccgr1, &ccm->CCGR1);
writel(ccgr2, &ccm->CCGR2);
writel(ccgr3, &ccm->CCGR3);
writel(ccgr4, &ccm->CCGR4);
writel(ccgr5, &ccm->CCGR5);
writel(ccgr6, &ccm->CCGR6);
}
void board_init_f(ulong dummy)
{
/* setup clock gating */
ccgr_init();
/* setup AIPS and disable watchdog */
arch_cpu_init();
/* setup AXI */
gpr_init();
/*
* setup poweroff GPIO. This controls system power regulator. Once
* the power button is released this must be enabled to keep system
* running. Not enabling it (or disabling it later) will turn off
* the main system regulator and instantly poweroff the system. We
* do this very early, to reduce the time users have to press the
* power button.
*/
SETUP_IOMUX_PADS(poweroff_pads);
gpio_direction_output(POWEROFF, 1);
/* setup GP timer */
timer_init();
/* iomux */
if (CONFIG_MXC_UART_BASE == UART2_BASE)
SETUP_IOMUX_PADS(uart2_pads);
else if (CONFIG_MXC_UART_BASE == UART3_BASE)
SETUP_IOMUX_PADS(uart3_pads);
/* UART clocks enabled and gd valid - init serial console */
preloader_console_init();
/* Needed for malloc() [used by SPI] to work in SPL prior to board_init_r() */
spl_init();
/* DDR initialization */
memory_init();
}
void spl_board_prepare_for_boot(void)
{
printf("Load normal U-Boot...\n");
}
#endif
Reference in a new issue View git blame Copy permalink