u-boot/common/cmd_dtt.c
Wolfgang Denk a89c33db96 General help message cleanup
Many of the help messages were not really helpful; for example, many
commands that take no arguments would not print a correct synopsis
line, but "No additional help available." which is not exactly wrong,
but not helpful either.

Commit ``Make "usage" messages more helpful.'' changed this
partially. But it also became clear that lots of "Usage" and "Help"
messages (fields "usage" and "help" in struct cmd_tbl_s respective)
were actually redundant.

This patch cleans this up - for example:

Before:
	=> help dtt
	dtt - Digital Thermometer and Thermostat

	Usage:
	dtt         - Read temperature from digital thermometer and thermostat.

After:
	=> help dtt
	dtt - Read temperature from Digital Thermometer and Thermostat

	Usage:
	dtt

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-06-12 20:47:16 +02:00

60 lines
1.6 KiB
C

/*
* (C) Copyright 2001
* Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <config.h>
#include <command.h>
#include <dtt.h>
#include <i2c.h>
int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
int i;
unsigned char sensors[] = CONFIG_DTT_SENSORS;
int old_bus;
/* switch to correct I2C bus */
old_bus = I2C_GET_BUS();
I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
/*
* Loop through sensors, read
* temperature, and output it.
*/
for (i = 0; i < sizeof (sensors); i++)
printf ("DTT%d: %i C\n", i + 1, dtt_get_temp (sensors[i]));
/* switch back to original I2C bus */
I2C_SET_BUS(old_bus);
return 0;
} /* do_dtt() */
/***************************************************/
U_BOOT_CMD(
dtt, 1, 1, do_dtt,
"Read temperature from Digital Thermometer and Thermostat",
""
);