u-boot/arch/arm/mach-sunxi
Lukasz Majewski d695d66278 spl: eMMC/SD: Provide one __weak spl_boot_mode() function
The goal of this patch is to clean up the code related to choosing SPL
MMC boot mode.

The spl_boot_mode() now is called only in spl_mmc_load_image() function,
which is only compiled in if CONFIG_SPL_MMC_SUPPORT is enabled.

To achieve the goal, all per mach/arch implementations eligible for
unification has been replaced with one __weak implementation.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com> (For ZynqMP)
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-07 22:06:18 -05:00
..
dram_timings sunxi: add LPDDR3 timing from stock boot0 2017-06-08 22:37:55 +05:30
board.c spl: eMMC/SD: Provide one __weak spl_boot_mode() function 2018-02-07 22:06:18 -05:00
clock.c sunxi: add gtbus-initialisation for sun9i 2016-10-30 11:38:04 +01:00
clock_sun4i.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
clock_sun6i.c sunxi: switch PRCM to non-secure on H3/H5 SoCs 2017-08-11 15:49:39 +05:30
clock_sun8i_a83t.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
clock_sun9i.c sunxi: add initial clock setup for sun9i for SPL 2016-10-30 11:38:04 +01:00
cpu_info.c sunxi: add basic V3s support 2017-04-21 09:23:17 +02:00
dram_helpers.c ARM: Rework and correct barrier definitions 2016-08-05 07:23:57 -04:00
dram_sun4i.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun6i.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun8i_a23.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun8i_a33.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun8i_a83t.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
dram_sun9i.c sunxi: DRAM initialisation for sun9i 2016-10-30 11:38:04 +01:00
dram_sunxi_dw.c sunxi: add LPDDR3 DRAM type support for DesignWare-like DRAM controller 2017-06-08 22:37:55 +05:30
gtbus_sun9i.c sunxi: add gtbus-initialisation for sun9i 2016-10-30 11:38:04 +01:00
Kconfig sunxi: set the default CPUx frequency of H5 to 816MHz 2017-12-02 21:55:25 +05:30
Makefile sunxi: Add selective DRAM type and timing 2017-06-08 22:37:55 +05:30
p2wi.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
pinmux.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
pmic_bus.c sunxi: Enable AXP221s in I2C mode with the R40 SoC 2017-04-20 13:30:00 +02:00
prcm.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
rmr_switch.S sunxi: A64: do an RMR switch if started in AArch32 mode 2017-01-04 16:37:42 +01:00
rsb.c sunxi: Move cpu independent code to mach directory 2016-04-01 09:52:28 +02:00
usb_phy.c sunxi: usb_phy: invert the USB phy_ctl condition 2017-10-03 19:12:06 +02:00