Tom Rini c3d2c24f6c OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC ... In the case of booting from certain peripherals, such as UART, we must not see what the device descriptor says for RAW or FAT mode because in addition to being nonsensical, it leads to a hang. This is why we have a test currently for the boot mode being within range. The problem however is that on some platforms we get MMC2_2 as the boot mode and not the defined value for MMC2, and in others we get the value for MMC2_2. This is required to fix eMMC booting on omap5_uevm. Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC). Signed-off-by: Tom Rini <trini@ti.com>		2013-04-08 11:29:34 -04:00
..
clocks.h	ARM: OMAP4+: Clean up the pmic code	2013-03-11 11:06:10 -04:00
cpu.h	omap4 i2c: add support for i2c bus 4	2012-09-06 06:01:09 +02:00
ehci.h	ehci-omap: Clean up added ehci-omap.c	2012-02-12 10:11:31 +01:00
gpio.h	omap: fix gpio related build breaks	2011-09-04 11:33:36 +02:00
i2c.h	omap4 i2c: add support for i2c bus 4	2012-09-06 06:01:09 +02:00
mmc_host_def.h	omap: consolidate common mmc definitions	2013-03-08 16:41:12 -05:00
mux_omap4.h	omap4+: Avoid using __attribute__ ((__packed__))	2012-05-15 08:31:26 +02:00
omap.h	arm: omap4: Fix SDRAM AUTO DETECTION	2013-04-08 11:29:34 -04:00
spl.h	OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC	2013-04-08 11:29:34 -04:00
sys_proto.h	ARM: OMAP4+: Change the PRCM structure prototype common for all Socs	2013-03-11 11:06:09 -04:00