mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 14:40:41 +00:00
9e4140329e
This commit changes the working directory where the build process occurs. Before this commit, build process occurred under the source tree for both in-tree and out-of-tree build. That's why we needed to add $(obj) prefix to all generated files in makefiles like follows: $(obj)u-boot.bin: $(obj)u-boot Here, $(obj) is empty for in-tree build, whereas it points to the output directory for out-of-tree build. And our old build system changes the current working directory with "make -C <sub-dir>" syntax when descending into the sub-directories. On the other hand, Kbuild uses a different idea to handle out-of-tree build and directory descending. The build process of Kbuild always occurs under the output tree. When "O=dir/to/store/output/files" is given, the build system changes the current working directory to that directory and restarts the make. Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=<sub-dir>" syntax for descending into sub-directories. (We can write it like "make $(obj)=<sub-dir>" with a shorthand.) This means the current working directory is always the top of the output directory. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de> |
||
|---|---|---|
| .. | ||
| bootscript | ||
| fpga.c | ||
| fpga.h | ||
| Makefile | ||
| mvsmr.c | ||
| mvsmr.h | ||
| README.mvsmr | ||
| u-boot.lds | ||
Matrix Vision mvSMR ------------------- 1. Board Description The mvSMR is a 75x130mm single image processing board used in automation. Power Supply is 24VDC. 2 System Components 2.1 CPU Freescale MPC5200B CPU running at 400MHz core and 133MHz XLB/IPB. 64MB DDR-I @ 133MHz. 8 MByte Nor Flash on local bus. 2 serial ports. Console running on ttyS0 @ 115200 8N1. 2.2 PCI PCI clock fixed at 33MHz due to old'n'slow Xilinx PCI core. 2.3 FPGA Xilinx Spartan-3 XC3S200 with PCI DMA engine. Connects to Matrix Vision specific CCD/CMOS sensor interface. 2.4 I2C EEPROM @ 0xA0 for vendor specifics. image sensor interface (slave addresses depend on sensor) 3 Flash layout. reset vector is 0x00000100, i.e. "LOWBOOT". FF800000 u-boot FF806000 u-boot script image FF808000 u-boot environment FF840000 FPGA raw bit file FF880000 root FS FFF00000 kernel 4 Booting On startup the bootscript @ FF806000 is executed. This script can be exchanged easily. Default boot mode is "boot from flash", i.e. system works stand-alone. This behaviour depends on some environment variables : "netboot" : yes ->try dhcp/bootp and boot from network. A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for DHCP server configuration, e.g. to provide different images to different devices. During netboot the system tries to get 3 image files: 1. Kernel - name + data is given during BOOTP. 2. Initrd - name is stored in "initrd_name" Fallback files are the flash versions.