u-boot/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
Chen-Yu Tsai b5fe523bbc sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
Sync the device tree files and device tree header files from upstream
Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo

    98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next

which is also part of next-20200108.

Changes brought in include:

  - cleanup of pinmux node names
  - addition of Security ID, MBUS, CSI, crypto engine, video codec,
    pmu, and thermal sensor device nodes for both SoCs
  - addition of deinterlacing engine device node on H3
  - cleanup of RTC device node and addition of its clocks
  - various board cleanups and improvements
    - removal of pinmux node for GPIO lines
    - cpufreq / DVFS
    - HDMI output
    - UART-based Bluetooth
    - audio codec
    - USB ports
  - new boards

Most of the changes don't concern U-boot.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24 23:06:49 +05:30

99 lines
3.1 KiB
Text

/*
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/* Orange Pi R1 is based on Orange Pi Zero design */
#include "sun8i-h2-plus-orangepi-zero.dts"
/ {
model = "Xunlong Orange Pi R1";
compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
/delete-node/ reg_vcc_wifi;
/*
* Ths pin of this regulator is the same with the Wi-Fi extra
* regulator on the original Zero. However it's used for USB
* Ethernet rather than the Wi-Fi now.
*/
reg_vcc_usb_eth: reg-vcc-usb-ethernet {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-usb-ethernet";
enable-active-high;
gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
aliases {
ethernet1 = &rtl8189etv;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
};
};
&ohci1 {
/*
* RTL8152B USB-Ethernet adapter is connected to USB1,
* and it's a USB 2.0 device. So the OHCI1 controller
* can be left disabled.
*/
status = "disabled";
};
&mmc1 {
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
rtl8189etv: sdio_wifi@1 {
reg = <1>;
};
};
&usbphy {
usb1_vbus-supply = <&reg_vcc_usb_eth>;
};