u-boot/arch/arm
Murali Karicheri 32d858fc4f ARM: dts: k2g-ice: add dt node for netcp
This patch adds dt node for DP83867 phy used on K2G ICE board and
also enable netcp device nodes for the board.

EVM hardware spec recommends to add 0.25 nsec delay in the tx
direction and 2.25 nsec delay in the rx direction for internal
delay in the clock path to be on the safer side.

The board straps RX_DV/RX_CTRL pin of on board DP83867 phy in mode
1. Unfortunately, the phy data manual disallows this. Add
ti,dp83867-rxctrl-strap-quirk in the phy node to allow software to
enable workaround suggested for this incorrect strap setting. This
ensures proper operation of this PHY.

The dts bindings are kept in sync with that from 4.14.y linux
kernel. This required the pinmux device related bindings to be
commented out to allow for compilation.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-12 08:05:47 -04:00
..
cpu armv8: Disable exception vectors in SPL by default 2019-03-22 12:15:03 -04:00
dts ARM: dts: k2g-ice: add dt node for netcp 2019-04-12 08:05:47 -04:00
include armv7: ls102xa: Add workaround for DDR erratum A-008850 2019-03-15 11:52:01 +05:30
lib arm: lib: bootm: Push the Starting kernel print to the end 2019-03-22 08:35:50 -04:00
mach-aspeed regmap: change regmap_init_mem() to take ofnode instead udevice 2018-05-07 15:49:51 -04:00
mach-at91 arm: at91: Add gardena-gateway-at91sam support 2019-04-09 09:28:50 +03:00
mach-bcm283x arm: Kconfig: spelling fixes 2019-01-18 09:16:15 -05:00
mach-bcmstb board: arm: Add support for Broadcom BCM7260 2018-09-10 21:19:31 -04:00
mach-davinci driver: net: consolidate ti's code in separate folder 2018-11-05 10:41:59 -06:00
mach-exynos exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASE 2019-03-25 17:35:52 -04:00
mach-highbank SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
mach-imx imx8qxp: Fix the reported CPU frequency 2019-03-13 09:14:35 +01:00
mach-integrator env: Convert CONFIG_ENV_IS_IN... to a choice 2017-08-15 20:50:01 -04:00
mach-k3 arm: mach-k3: common: Clean up ATF image startup function 2019-02-09 07:51:02 -05:00
mach-keystone ARM: k2g: add a workaround to reset the phy 2019-04-12 08:05:46 -04:00
mach-kirkwood Convert CONFIG_ENV_SPI_* to Kconfig 2019-03-25 17:36:59 -04:00
mach-mediatek mt7629: use linux kernel compatible SMP initialization 2018-12-26 21:35:53 -05:00
mach-meson arm: meson: board-gx: Setup VPU in fdt 2019-01-31 09:35:01 +01:00
mach-mvebu Convert CONFIG_ENV_SPI_* to Kconfig 2019-03-25 17:36:59 -04:00
mach-omap2 usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE 2019-02-15 22:01:15 +01:00
mach-orion5x arm: remove prototype for get_timer_masked 2018-10-10 13:35:09 -04:00
mach-owl board: Add uCRobotics Bubblegum-96 board support 2018-07-09 15:25:23 -04:00
mach-qemu Kconfig: Sort bool, default, select and imply options 2018-07-30 07:18:48 -04:00
mach-rmobile pinctrl: renesas: Add R8A77965 pin control tables 2019-04-09 18:19:10 +02:00
mach-rockchip Revert "rockchip: Drop call to rockchip_dnl_mode_check() for now" 2019-03-29 09:21:13 +01:00
mach-s5pc1xx exynos: Convert to use CONFIG_BLK 2019-02-09 12:50:21 -07:00
mach-snapdragon arm: mach-snapdragon: pinctrl: clarify gpio disable bit 2019-01-25 12:12:56 -05:00
mach-socfpga ARM: socfpga: Disable D cache in SPL 2019-03-09 17:59:13 +01:00
mach-sti board: Add STMicroelectronics STiH410-B2260 support 2017-03-14 20:40:21 -04:00
mach-stm32 mach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7 2018-10-06 14:09:41 -04:00
mach-stm32mp arm: stm32mp1: deploy spl in root folder 2019-01-29 09:41:37 -05:00
mach-sunxi arm: sunxi: Enable DM_MMC on required SoCs 2019-04-08 16:35:15 -04:00
mach-tegra arm64: zynqmp: Move SoC sources to mach-zynqmp 2019-01-24 10:03:44 +01:00
mach-uniphier ARM: uniphier: do not modify bootcmd environment variable at run-time 2018-12-29 11:38:33 +09:00
mach-versal arm64: versal: Move IOU_SWITCH_DIVISOR0 to Kconfig 2019-02-14 14:31:10 +01:00
mach-versatile SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
mach-zynq ARM: zynq: Remove addresses for i2c controllers 2019-02-14 14:31:10 +01:00
mach-zynqmp arm64: zynqmp: Fix logic around CONFIG_ZYNQ_SDHCI 2019-02-14 14:31:10 +01:00
mach-zynqmp-r5 arm: zynqmp: Add ZynqMP minimal R5 support 2018-05-11 09:38:23 +02:00
thumb1/include/asm/proc-armv SPDX: Convert a few files that were missed before 2018-05-10 20:38:35 -04:00
config.mk efi_loader: Rename sections to allow for implicit data 2018-07-25 14:57:44 +02:00
Kconfig arm: sunxi: Enable DM_MMC on required SoCs 2019-04-08 16:35:15 -04:00
Kconfig.debug
Makefile arm: imx: build mach-imx for i.MX8 2019-01-28 20:35:47 +01:00