u-boot/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts
Chen-Yu Tsai b5fe523bbc sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
Sync the device tree files and device tree header files from upstream
Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo

    98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next

which is also part of next-20200108.

Changes brought in include:

  - cleanup of pinmux node names
  - addition of Security ID, MBUS, CSI, crypto engine, video codec,
    pmu, and thermal sensor device nodes for both SoCs
  - addition of deinterlacing engine device node on H3
  - cleanup of RTC device node and addition of its clocks
  - various board cleanups and improvements
    - removal of pinmux node for GPIO lines
    - cpufreq / DVFS
    - HDMI output
    - UART-based Bluetooth
    - audio codec
    - USB ports
  - new boards

Most of the changes don't concern U-boot.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24 23:06:49 +05:30

152 lines
2.3 KiB
Text

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2017 Centrum Embedded Systems, Jia-Bin Huang <jb@ces.com.tw>
* Copyright (C) 2018 Jonathan McDowell <noodles@earth.li>
*/
/dts-v1/;
#include "sun8i-h3.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "MapleBoard MP130";
compatible = "mapleboard,mp130", "allwinner,sun8i-h3";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pwr_led {
label = "mp130:orange:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
status_led {
label = "mp130:orange:status";
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
};
};
r_gpio_keys {
compatible = "gpio-keys";
power {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
};
user {
label = "user";
linux,code = <BTN_0>;
gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
};
};
};
&codec {
allwinner,audio-routing =
"Line Out", "LINEOUT",
"LINEIN", "Line In";
status = "okay";
};
&ehci1 {
status = "okay";
};
&ehci2 {
status = "okay";
};
&ehci3 {
status = "okay";
};
&emac {
phy-handle = <&int_mii_phy>;
phy-mode = "mii";
allwinner,leds-active-low;
status = "okay";
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&ohci1 {
status = "okay";
};
&ohci2 {
status = "okay";
};
&ohci3 {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "disabled";
};
&usb_otg {
dr_mode = "peripheral";
status = "okay";
};
&usbphy {
/* USB VBUS is always on */
status = "okay";
};