Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-30 06:53:09 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/freescale/mx6sabreauto/mx6sabreauto.c
Tom Rini 9774462e34 arm: Disable ATAGs support 
With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and
stemmy, disable ATAG support.  A large number of platforms had enabled
support but never supported a kernel so old as to require it.  Further,
some platforms are old enough to support both, but are well supported by
devicetree booting, and have been for a number of years.  This is
because some of the ATAGs related functions have been re-used to provide
the same kind of information, but for devicetree or just generally to
inform the user.  When needed still, rename these functions to
get_board_revision() instead, to avoid conflicts.  In other cases, these
functions were simply unused, so drop them.

Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Phil Sutter <phil@nwl.cc>
Cc: Stefan Bosch <stefan_b@posteo.net>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-07 16:22:30 -04:00

1015 lines
27 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*/
#include <common.h>
#include <image.h>
#include <init.h>
#include <net.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
#include <env.h>
#include <linux/errno.h>
#include <asm/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/spi.h>
#include <mmc.h>
#include <fsl_esdhc_imx.h>
#include <miiphy.h>
#include <asm/arch/sys_proto.h>
#include <i2c.h>
#include <input.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/mach-imx/video.h>
#include <asm/arch/crm_regs.h>
#include <pca953x.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include "../common/pfuze.h"
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
PAD_CTL_SRE_FAST)
#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
#define WEIM_NOR_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
#define I2C_PMIC 1
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
return 0;
}
static iomux_v3_cfg_t const uart4_pads[] = {
IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
};
/* I2C2 PMIC, iPod, Tuner, Codec, Touch, HDMI EDID, MIPI CSI2 card */
static struct i2c_pads_info mx6q_i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6Q_PAD_EIM_EB2__I2C2_SCL | PC,
.gpio_mode = MX6Q_PAD_EIM_EB2__GPIO2_IO30 | PC,
.gp = IMX_GPIO_NR(2, 30)
},
.sda = {
.i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
.gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
.gp = IMX_GPIO_NR(4, 13)
}
};
static struct i2c_pads_info mx6dl_i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6DL_PAD_EIM_EB2__I2C2_SCL | PC,
.gpio_mode = MX6DL_PAD_EIM_EB2__GPIO2_IO30 | PC,
.gp = IMX_GPIO_NR(2, 30)
},
.sda = {
.i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
.gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
.gp = IMX_GPIO_NR(4, 13)
}
};
#ifndef CONFIG_SYS_FLASH_CFI
/*
* I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor,
* Compass Sensor, Accelerometer, Res Touch
*/
static struct i2c_pads_info mx6q_i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC,
.gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC,
.gp = IMX_GPIO_NR(1, 3)
},
.sda = {
.i2c_mode = MX6Q_PAD_EIM_D18__I2C3_SDA | PC,
.gpio_mode = MX6Q_PAD_EIM_D18__GPIO3_IO18 | PC,
.gp = IMX_GPIO_NR(3, 18)
}
};
static struct i2c_pads_info mx6dl_i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6DL_PAD_GPIO_3__I2C3_SCL | PC,
.gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC,
.gp = IMX_GPIO_NR(1, 3)
},
.sda = {
.i2c_mode = MX6DL_PAD_EIM_D18__I2C3_SDA | PC,
.gpio_mode = MX6DL_PAD_EIM_D18__GPIO3_IO18 | PC,
.gp = IMX_GPIO_NR(3, 18)
}
};
#endif
static iomux_v3_cfg_t const i2c3_pads[] = {
IOMUX_PADS(PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static iomux_v3_cfg_t const port_exp[] = {
IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
#ifdef CONFIG_MTD_NOR_FLASH
static iomux_v3_cfg_t const eimnor_pads[] = {
IOMUX_PADS(PAD_EIM_D16__EIM_DATA16 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D17__EIM_DATA17 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D18__EIM_DATA18 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D19__EIM_DATA19 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D20__EIM_DATA20 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D21__EIM_DATA21 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D22__EIM_DATA22 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D23__EIM_DATA23 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D24__EIM_DATA24 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D25__EIM_DATA25 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D26__EIM_DATA26 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D27__EIM_DATA27 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D28__EIM_DATA28 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D29__EIM_DATA29 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D30__EIM_DATA30 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D31__EIM_DATA31 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA0__EIM_AD00 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA1__EIM_AD01 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA2__EIM_AD02 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA3__EIM_AD03 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA4__EIM_AD04 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA5__EIM_AD05 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA6__EIM_AD06 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA7__EIM_AD07 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA8__EIM_AD08 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA9__EIM_AD09 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA10__EIM_AD10 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA11__EIM_AD11 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA12__EIM_AD12 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA13__EIM_AD13 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA14__EIM_AD14 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA15__EIM_AD15 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A16__EIM_ADDR16 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A17__EIM_ADDR17 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A18__EIM_ADDR18 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A19__EIM_ADDR19 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A20__EIM_ADDR20 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A21__EIM_ADDR21 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A22__EIM_ADDR22 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A23__EIM_ADDR23 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_OE__EIM_OE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_RW__EIM_RW | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_CS0__EIM_CS0_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static void eimnor_cs_setup(void)
{
struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
writel(0x00020181, &weim_regs->cs0gcr1);
writel(0x00000001, &weim_regs->cs0gcr2);
writel(0x0a020000, &weim_regs->cs0rcr1);
writel(0x0000c000, &weim_regs->cs0rcr2);
writel(0x0804a240, &weim_regs->cs0wcr1);
writel(0x00000120, &weim_regs->wcr);
set_chipselect_size(CS0_128);
}
static void eim_clk_setup(void)
{
struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
int cscmr1, ccgr6;
/* Turn off EIM clock */
ccgr6 = readl(&imx_ccm->CCGR6);
ccgr6 &= ~(0x3 << 10);
writel(ccgr6, &imx_ccm->CCGR6);
/*
* Configure clk_eim_slow_sel = 00 --> derive clock from AXI clk root
* and aclk_eim_slow_podf = 01 --> divide by 2
* so that we can have EIM at the maximum clock of 132MHz
*/
cscmr1 = readl(&imx_ccm->cscmr1);
cscmr1 &= ~(MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK |
MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK);
cscmr1 |= (1 << MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET);
writel(cscmr1, &imx_ccm->cscmr1);
/* Turn on EIM clock */
ccgr6 |= (0x3 << 10);
writel(ccgr6, &imx_ccm->CCGR6);
}
static void setup_iomux_eimnor(void)
{
SETUP_IOMUX_PADS(eimnor_pads);
gpio_direction_output(IMX_GPIO_NR(5, 4), 0);
eimnor_cs_setup();
}
#endif
static iomux_v3_cfg_t const usdhc3_pads[] = {
IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_GPIO_18__SD3_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static void setup_iomux_uart(void)
{
SETUP_IOMUX_PADS(uart4_pads);
}
#ifdef CONFIG_FSL_ESDHC_IMX
static struct fsl_esdhc_cfg usdhc_cfg[1] = {
{USDHC3_BASE_ADDR},
};
int board_mmc_getcd(struct mmc *mmc)
{
gpio_direction_input(IMX_GPIO_NR(6, 15));
return !gpio_get_value(IMX_GPIO_NR(6, 15));
}
int board_mmc_init(struct bd_info *bis)
{
SETUP_IOMUX_PADS(usdhc3_pads);
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
}
#endif
#ifdef CONFIG_NAND_MXS
static iomux_v3_cfg_t gpmi_pads[] = {
IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL0)),
IOMUX_PADS(PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
IOMUX_PADS(PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(GPMI_PAD_CTRL1)),
};
static void setup_gpmi_nand(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
/* config gpmi nand iomux */
SETUP_IOMUX_PADS(gpmi_pads);
setup_gpmi_io_clk((MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
MXC_CCM_CS2CDR_ENFC_CLK_SEL(3)));
/* enable apbh clock gating */
setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
}
#endif
#ifdef CONFIG_REVISION_TAG
u32 get_board_rev(void)
{
int rev = nxp_board_rev();
return (get_cpu_rev() & ~(0xF << 8)) | rev;
}
#endif
static int ar8031_phy_fixup(struct phy_device *phydev)
{
unsigned short val;
/* To enable AR8031 ouput a 125MHz clk from CLK_25M */
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
val &= 0xffe3;
val |= 0x18;
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
/* introduce tx clock delay */
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
val |= 0x0100;
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
return 0;
}
int board_phy_config(struct phy_device *phydev)
{
ar8031_phy_fixup(phydev);
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
#if defined(CONFIG_VIDEO_IPUV3)
static void disable_lvds(struct display_info_t const *dev)
{
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
clrbits_le32(&iomux->gpr[2],
IOMUXC_GPR2_LVDS_CH0_MODE_MASK |
IOMUXC_GPR2_LVDS_CH1_MODE_MASK);
}
static void do_enable_hdmi(struct display_info_t const *dev)
{
disable_lvds(dev);
imx_enable_hdmi_phy();
}
struct display_info_t const displays[] = {{
.bus = -1,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB666,
.detect = NULL,
.enable = NULL,
.mode = {
.name = "Hannstar-XGA",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = -1,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = detect_hdmi,
.enable = do_enable_hdmi,
.mode = {
.name = "HDMI",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED,
} } };
size_t display_count = ARRAY_SIZE(displays);
iomux_v3_cfg_t const backlight_pads[] = {
IOMUX_PADS(PAD_SD4_DAT1__GPIO2_IO09 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
};
static void setup_iomux_backlight(void)
{
gpio_request(IMX_GPIO_NR(2, 9), "backlight");
gpio_direction_output(IMX_GPIO_NR(2, 9), 1);
SETUP_IOMUX_PADS(backlight_pads);
}
static void setup_display(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
int reg;
setup_iomux_backlight();
enable_ipu_clock();
imx_setup_hdmi();
/* Turn on LDB_DI0 and LDB_DI1 clocks */
reg = readl(&mxc_ccm->CCGR3);
reg |= MXC_CCM_CCGR3_LDB_DI0_MASK | MXC_CCM_CCGR3_LDB_DI1_MASK;
writel(reg, &mxc_ccm->CCGR3);
/* Set LDB_DI0 and LDB_DI1 clk select to 3b'011 */
reg = readl(&mxc_ccm->cs2cdr);
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK |
MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) |
(3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->cs2cdr);
reg = readl(&mxc_ccm->cscmr2);
reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV | MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV;
writel(reg, &mxc_ccm->cscmr2);
reg = readl(&mxc_ccm->chsccdr);
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
reg |= (CHSCCDR_CLK_SEL_LDB_DI0 <<
MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->chsccdr);
reg = IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW |
IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW |
IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG |
IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT |
IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT |
IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0 |
IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED;
writel(reg, &iomux->gpr[2]);
reg = readl(&iomux->gpr[3]);
reg &= ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK |
IOMUXC_GPR3_HDMI_MUX_CTL_MASK);
reg |= (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET) |
(IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
IOMUXC_GPR3_HDMI_MUX_CTL_OFFSET);
writel(reg, &iomux->gpr[3]);
}
#endif /* CONFIG_VIDEO_IPUV3 */
/*
* Do not overwrite the console
* Use always serial for U-Boot console
*/
int overwrite_console(void)
{
return 1;
}
int board_early_init_f(void)
{
setup_iomux_uart();
#ifdef CONFIG_NAND_MXS
setup_gpmi_nand();
#endif
#ifdef CONFIG_MTD_NOR_FLASH
eim_clk_setup();
#endif
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
/* I2C 2 and 3 setup - I2C 3 hw mux with EIM */
if (is_mx6dq() || is_mx6dqp())
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1);
else
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
/* I2C 3 Steer */
gpio_request(IMX_GPIO_NR(5, 4), "steer logic");
gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
SETUP_IOMUX_PADS(i2c3_pads);
#ifndef CONFIG_SYS_FLASH_CFI
if (is_mx6dq() || is_mx6dqp())
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info2);
else
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info2);
#endif
gpio_request(IMX_GPIO_NR(1, 15), "expander en");
gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
SETUP_IOMUX_PADS(port_exp);
#ifdef CONFIG_VIDEO_IPUV3
setup_display();
#endif
#ifdef CONFIG_MTD_NOR_FLASH
setup_iomux_eimnor();
#endif
return 0;
}
#ifdef CONFIG_MXC_SPI
int board_spi_cs_gpio(unsigned bus, unsigned cs)
{
return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1;
}
#endif
int power_init_board(void)
{
struct pmic *p;
unsigned int value;
p = pfuze_common_init(I2C_PMIC);
if (!p)
return -ENODEV;
if (is_mx6dqp()) {
/* set SW2 staby volatage 0.975V*/
pmic_reg_read(p, PFUZE100_SW2STBY, &value);
value &= ~0x3f;
value |= 0x17;
pmic_reg_write(p, PFUZE100_SW2STBY, value);
}
return pfuze_mode_init(p, APS_PFM);
}
#ifdef CONFIG_CMD_BMODE
static const struct boot_mode board_boot_modes[] = {
/* 4 bit bus width */
{"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
{NULL, 0},
};
#endif
int board_late_init(void)
{
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
env_set("board_name", "SABREAUTO");
if (is_mx6dqp())
env_set("board_rev", "MX6QP");
else if (is_mx6dq())
env_set("board_rev", "MX6Q");
else if (is_mx6sdl())
env_set("board_rev", "MX6DL");
#endif
return 0;
}
int checkboard(void)
{
printf("Board: MX6Q-Sabreauto rev%c\n", nxp_board_rev_string());
return 0;
}
#ifdef CONFIG_USB_EHCI_MX6
int board_ehci_hcd_init(int port)
{
switch (port) {
case 0:
/*
* Set daisy chain for otg_pin_id on 6q.
* For 6dl, this bit is reserved.
*/
imx_iomux_set_gpr_register(1, 13, 1, 0);
break;
case 1:
break;
default:
printf("MXC USB port %d not yet supported\n", port);
return -EINVAL;
}
return 0;
}
#endif
#ifdef CONFIG_SPL_BUILD
#include <asm/arch/mx6-ddr.h>
#include <spl.h>
#include <linux/libfdt.h>
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
return 0;
}
#endif
static void ccgr_init(void)
{
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
writel(0x00C03F3F, &ccm->CCGR0);
writel(0x0030FC03, &ccm->CCGR1);
writel(0x0FFFC000, &ccm->CCGR2);
writel(0x3FF00000, &ccm->CCGR3);
writel(0x00FFF300, &ccm->CCGR4);
writel(0x0F0000C3, &ccm->CCGR5);
writel(0x000003FF, &ccm->CCGR6);
}
static int mx6q_dcd_table[] = {
0x020e0798, 0x000C0000,
0x020e0758, 0x00000000,
0x020e0588, 0x00000030,
0x020e0594, 0x00000030,
0x020e056c, 0x00000030,
0x020e0578, 0x00000030,
0x020e074c, 0x00000030,
0x020e057c, 0x00000030,
0x020e058c, 0x00000000,
0x020e059c, 0x00000030,
0x020e05a0, 0x00000030,
0x020e078c, 0x00000030,
0x020e0750, 0x00020000,
0x020e05a8, 0x00000028,
0x020e05b0, 0x00000028,
0x020e0524, 0x00000028,
0x020e051c, 0x00000028,
0x020e0518, 0x00000028,
0x020e050c, 0x00000028,
0x020e05b8, 0x00000028,
0x020e05c0, 0x00000028,
0x020e0774, 0x00020000,
0x020e0784, 0x00000028,
0x020e0788, 0x00000028,
0x020e0794, 0x00000028,
0x020e079c, 0x00000028,
0x020e07a0, 0x00000028,
0x020e07a4, 0x00000028,
0x020e07a8, 0x00000028,
0x020e0748, 0x00000028,
0x020e05ac, 0x00000028,
0x020e05b4, 0x00000028,
0x020e0528, 0x00000028,
0x020e0520, 0x00000028,
0x020e0514, 0x00000028,
0x020e0510, 0x00000028,
0x020e05bc, 0x00000028,
0x020e05c4, 0x00000028,
0x021b0800, 0xa1390003,
0x021b080c, 0x001F001F,
0x021b0810, 0x001F001F,
0x021b480c, 0x001F001F,
0x021b4810, 0x001F001F,
0x021b083c, 0x43260335,
0x021b0840, 0x031A030B,
0x021b483c, 0x4323033B,
0x021b4840, 0x0323026F,
0x021b0848, 0x483D4545,
0x021b4848, 0x44433E48,
0x021b0850, 0x41444840,
0x021b4850, 0x4835483E,
0x021b081c, 0x33333333,
0x021b0820, 0x33333333,
0x021b0824, 0x33333333,
0x021b0828, 0x33333333,
0x021b481c, 0x33333333,
0x021b4820, 0x33333333,
0x021b4824, 0x33333333,
0x021b4828, 0x33333333,
0x021b08b8, 0x00000800,
0x021b48b8, 0x00000800,
0x021b0004, 0x00020036,
0x021b0008, 0x09444040,
0x021b000c, 0x8A8F7955,
0x021b0010, 0xFF328F64,
0x021b0014, 0x01FF00DB,
0x021b0018, 0x00001740,
0x021b001c, 0x00008000,
0x021b002c, 0x000026d2,
0x021b0030, 0x008F1023,
0x021b0040, 0x00000047,
0x021b0000, 0x841A0000,
0x021b001c, 0x04088032,
0x021b001c, 0x00008033,
0x021b001c, 0x00048031,
0x021b001c, 0x09408030,
0x021b001c, 0x04008040,
0x021b0020, 0x00005800,
0x021b0818, 0x00011117,
0x021b4818, 0x00011117,
0x021b0004, 0x00025576,
0x021b0404, 0x00011006,
0x021b001c, 0x00000000,
0x020c4068, 0x00C03F3F,
0x020c406c, 0x0030FC03,
0x020c4070, 0x0FFFC000,
0x020c4074, 0x3FF00000,
0x020c4078, 0xFFFFF300,
0x020c407c, 0x0F0000F3,
0x020c4080, 0x00000FFF,
0x020e0010, 0xF00000CF,
0x020e0018, 0x007F007F,
0x020e001c, 0x007F007F,
};
static int mx6qp_dcd_table[] = {
0x020e0798, 0x000C0000,
0x020e0758, 0x00000000,
0x020e0588, 0x00000030,
0x020e0594, 0x00000030,
0x020e056c, 0x00000030,
0x020e0578, 0x00000030,
0x020e074c, 0x00000030,
0x020e057c, 0x00000030,
0x020e058c, 0x00000000,
0x020e059c, 0x00000030,
0x020e05a0, 0x00000030,
0x020e078c, 0x00000030,
0x020e0750, 0x00020000,
0x020e05a8, 0x00000030,
0x020e05b0, 0x00000030,
0x020e0524, 0x00000030,
0x020e051c, 0x00000030,
0x020e0518, 0x00000030,
0x020e050c, 0x00000030,
0x020e05b8, 0x00000030,
0x020e05c0, 0x00000030,
0x020e0774, 0x00020000,
0x020e0784, 0x00000030,
0x020e0788, 0x00000030,
0x020e0794, 0x00000030,
0x020e079c, 0x00000030,
0x020e07a0, 0x00000030,
0x020e07a4, 0x00000030,
0x020e07a8, 0x00000030,
0x020e0748, 0x00000030,
0x020e05ac, 0x00000030,
0x020e05b4, 0x00000030,
0x020e0528, 0x00000030,
0x020e0520, 0x00000030,
0x020e0514, 0x00000030,
0x020e0510, 0x00000030,
0x020e05bc, 0x00000030,
0x020e05c4, 0x00000030,
0x021b0800, 0xa1390003,
0x021b080c, 0x001b001e,
0x021b0810, 0x002e0029,
0x021b480c, 0x001b002a,
0x021b4810, 0x0019002c,
0x021b083c, 0x43240334,
0x021b0840, 0x0324031a,
0x021b483c, 0x43340344,
0x021b4840, 0x03280276,
0x021b0848, 0x44383A3E,
0x021b4848, 0x3C3C3846,
0x021b0850, 0x2e303230,
0x021b4850, 0x38283E34,
0x021b081c, 0x33333333,
0x021b0820, 0x33333333,
0x021b0824, 0x33333333,
0x021b0828, 0x33333333,
0x021b481c, 0x33333333,
0x021b4820, 0x33333333,
0x021b4824, 0x33333333,
0x021b4828, 0x33333333,
0x021b08c0, 0x24912492,
0x021b48c0, 0x24912492,
0x021b08b8, 0x00000800,
0x021b48b8, 0x00000800,
0x021b0004, 0x00020036,
0x021b0008, 0x09444040,
0x021b000c, 0x898E7955,
0x021b0010, 0xFF328F64,
0x021b0014, 0x01FF00DB,
0x021b0018, 0x00001740,
0x021b001c, 0x00008000,
0x021b002c, 0x000026d2,
0x021b0030, 0x008E1023,
0x021b0040, 0x00000047,
0x021b0400, 0x14420000,
0x021b0000, 0x841A0000,
0x00bb0008, 0x00000004,
0x00bb000c, 0x2891E41A,
0x00bb0038, 0x00000564,
0x00bb0014, 0x00000040,
0x00bb0028, 0x00000020,
0x00bb002c, 0x00000020,
0x021b001c, 0x04088032,
0x021b001c, 0x00008033,
0x021b001c, 0x00048031,
0x021b001c, 0x09408030,
0x021b001c, 0x04008040,
0x021b0020, 0x00005800,
0x021b0818, 0x00011117,
0x021b4818, 0x00011117,
0x021b0004, 0x00025576,
0x021b0404, 0x00011006,
0x021b001c, 0x00000000,
0x020c4068, 0x00C03F3F,
0x020c406c, 0x0030FC03,
0x020c4070, 0x0FFFC000,
0x020c4074, 0x3FF00000,
0x020c4078, 0xFFFFF300,
0x020c407c, 0x0F0000F3,
0x020c4080, 0x00000FFF,
0x020e0010, 0xF00000CF,
0x020e0018, 0x77177717,
0x020e001c, 0x77177717,
};
static int mx6dl_dcd_table[] = {
0x020e0774, 0x000C0000,
0x020e0754, 0x00000000,
0x020e04ac, 0x00000030,
0x020e04b0, 0x00000030,
0x020e0464, 0x00000030,
0x020e0490, 0x00000030,
0x020e074c, 0x00000030,
0x020e0494, 0x00000030,
0x020e04a0, 0x00000000,
0x020e04b4, 0x00000030,
0x020e04b8, 0x00000030,
0x020e076c, 0x00000030,
0x020e0750, 0x00020000,
0x020e04bc, 0x00000028,
0x020e04c0, 0x00000028,
0x020e04c4, 0x00000028,
0x020e04c8, 0x00000028,
0x020e04cc, 0x00000028,
0x020e04d0, 0x00000028,
0x020e04d4, 0x00000028,
0x020e04d8, 0x00000028,
0x020e0760, 0x00020000,
0x020e0764, 0x00000028,
0x020e0770, 0x00000028,
0x020e0778, 0x00000028,
0x020e077c, 0x00000028,
0x020e0780, 0x00000028,
0x020e0784, 0x00000028,
0x020e078c, 0x00000028,
0x020e0748, 0x00000028,
0x020e0470, 0x00000028,
0x020e0474, 0x00000028,
0x020e0478, 0x00000028,
0x020e047c, 0x00000028,
0x020e0480, 0x00000028,
0x020e0484, 0x00000028,
0x020e0488, 0x00000028,
0x020e048c, 0x00000028,
0x021b0800, 0xa1390003,
0x021b080c, 0x001F001F,
0x021b0810, 0x001F001F,
0x021b480c, 0x001F001F,
0x021b4810, 0x001F001F,
0x021b083c, 0x42190217,
0x021b0840, 0x017B017B,
0x021b483c, 0x4176017B,
0x021b4840, 0x015F016C,
0x021b0848, 0x4C4C4D4C,
0x021b4848, 0x4A4D4C48,
0x021b0850, 0x3F3F3F40,
0x021b4850, 0x3538382E,
0x021b081c, 0x33333333,
0x021b0820, 0x33333333,
0x021b0824, 0x33333333,
0x021b0828, 0x33333333,
0x021b481c, 0x33333333,
0x021b4820, 0x33333333,
0x021b4824, 0x33333333,
0x021b4828, 0x33333333,
0x021b08b8, 0x00000800,
0x021b48b8, 0x00000800,
0x021b0004, 0x00020025,
0x021b0008, 0x00333030,
0x021b000c, 0x676B5313,
0x021b0010, 0xB66E8B63,
0x021b0014, 0x01FF00DB,
0x021b0018, 0x00001740,
0x021b001c, 0x00008000,
0x021b002c, 0x000026d2,
0x021b0030, 0x006B1023,
0x021b0040, 0x00000047,
0x021b0000, 0x841A0000,
0x021b001c, 0x04008032,
0x021b001c, 0x00008033,
0x021b001c, 0x00048031,
0x021b001c, 0x05208030,
0x021b001c, 0x04008040,
0x021b0020, 0x00005800,
0x021b0818, 0x00011117,
0x021b4818, 0x00011117,
0x021b0004, 0x00025565,
0x021b0404, 0x00011006,
0x021b001c, 0x00000000,
0x020c4068, 0x00C03F3F,
0x020c406c, 0x0030FC03,
0x020c4070, 0x0FFFC000,
0x020c4074, 0x3FF00000,
0x020c4078, 0xFFFFF300,
0x020c407c, 0x0F0000C3,
0x020c4080, 0x00000FFF,
0x020e0010, 0xF00000CF,
0x020e0018, 0x007F007F,
0x020e001c, 0x007F007F,
};
static void ddr_init(int *table, int size)
{
int i;
for (i = 0; i < size / 2 ; i++)
writel(table[2 * i + 1], table[2 * i]);
}
static void spl_dram_init(void)
{
if (is_mx6dq())
ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
else if (is_mx6dqp())
ddr_init(mx6qp_dcd_table, ARRAY_SIZE(mx6qp_dcd_table));
else if (is_mx6sdl())
ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
}
void board_init_f(ulong dummy)
{
/* DDR initialization */
spl_dram_init();
/* setup AIPS and disable watchdog */
arch_cpu_init();
ccgr_init();
gpr_init();
/* iomux and setup of i2c */
board_early_init_f();
/* setup GP timer */
timer_init();
/* UART clocks enabled and gd valid - init serial console */
preloader_console_init();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
/* load/boot image from boot device */
board_init_r(NULL, 0);
}
#endif
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
if (is_mx6dq()) {
if (!strcmp(name, "imx6q-sabreauto"))
return 0;
} else if (is_mx6dqp()) {
if (!strcmp(name, "imx6qp-sabreauto"))
return 0;
} else if (is_mx6dl()) {
if (!strcmp(name, "imx6dl-sabreauto"))
return 0;
}
return -1;
}
#endif
Reference in a new issue View git blame Copy permalink