mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
ca27227c59
The PDK2 board is capable of running both 100M and 1G ethernet. However, the i.MX6 has only one ethernet MAC, so it is possible to configure either 100M or 1G Ethernet. In case of 100M option, the PHY is on the SoM and the signals are routed to a RJ45 port. For 1G the PHY is on the PDK2 board with another RJ45 port. 100M and 1G ethernet use different signal pins from the i.MX6, but share the MDIO bus. This SoM board combination is used to demonstrate how to enable 1G ethernet configuration. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
186 lines
4.5 KiB
Text
186 lines
4.5 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+)
|
|
/*
|
|
* Copyright (C) 2015-2019 DH electronics GmbH
|
|
* Copyright (C) 2018 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include "imx6qdl-dhcom.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
clk_ext_audio_codec: clock-codec {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx-audio-sgtl5000";
|
|
model = "imx-sgtl5000";
|
|
ssi-controller = <&ssi1>;
|
|
audio-codec = <&sgtl5000>;
|
|
audio-routing =
|
|
"MIC_IN", "Mic Jack",
|
|
"Mic Jack", "Mic Bias",
|
|
"LINE_IN", "Line In Jack",
|
|
"Headphone Jack", "HP_OUT";
|
|
mux-int-port = <1>;
|
|
mux-ext-port = <3>;
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux_ext>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* 1G ethernet */
|
|
/delete-node/ ðphy0;
|
|
&fec {
|
|
phy-mode = "rgmii";
|
|
phy-handle = <ðphy7>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet_1G>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy7: ethernet-phy@7 { /* KSZ 9021 */
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-0 = <&pinctrl_ethphy7>;
|
|
pinctrl-names = "default";
|
|
reg = <7>;
|
|
reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
|
|
reset-assert-us = <1000>;
|
|
reset-deassert-us = <1000>;
|
|
rxc-skew-ps = <3000>;
|
|
rxd0-skew-ps = <0>;
|
|
rxd1-skew-ps = <0>;
|
|
rxd2-skew-ps = <0>;
|
|
rxd3-skew-ps = <0>;
|
|
txc-skew-ps = <3000>;
|
|
txd0-skew-ps = <0>;
|
|
txd1-skew-ps = <0>;
|
|
txd2-skew-ps = <0>;
|
|
txd3-skew-ps = <0>;
|
|
rxdv-skew-ps = <0>;
|
|
txen-skew-ps = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&hdmi {
|
|
ddc-i2c-bus = <&i2c2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
sgtl5000: codec@a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
#sound-dai-cells = <0>;
|
|
clocks = <&clk_ext_audio_codec>;
|
|
VDDA-supply = <®_3p3v>;
|
|
VDDIO-supply = <®_3p3v>;
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>;
|
|
|
|
pinctrl_hog: hog-grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x400120b0
|
|
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0
|
|
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0
|
|
MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0
|
|
MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x120b0
|
|
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0
|
|
MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0
|
|
MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0
|
|
MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0
|
|
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0
|
|
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x400120b0
|
|
MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x400120b0
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x400120b0
|
|
MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x400120b0
|
|
MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x400120b0
|
|
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x400120b0
|
|
MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x400120b0
|
|
MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x400120b0
|
|
MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x400120b0
|
|
MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x400120b0
|
|
MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x400120b0
|
|
MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x400120b0
|
|
MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x400120b0
|
|
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x400120b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_audmux_ext: audmux-ext-grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
|
|
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
|
|
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
|
|
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet_1G: enet-1G-grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_ethphy7: ethphy7-grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0xb0 /* Reset */
|
|
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0xb1 /* Int */
|
|
MX6QDL_PAD_EIM_D26__GPIO3_IO26 0xb1 /* WOL */
|
|
>;
|
|
};
|
|
|
|
pinctrl_pcie: pcie-grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1
|
|
>;
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pcie>;
|
|
reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ssi1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
status = "okay";
|
|
};
|