u-boot/board/beacon/imx8mn
Fabio Estevam f0f461287e imx: Suggest the NXP ATF github repo
As explained in the text at the bottom of the page
https://source.codeaurora.org/external/imx/imx-atf:

"QUIC repositories on this site will not receive any updates after
March 31, 2022, and will be deleted on March 31, 2023."

Point to the NXP ATF github repo instead.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2023-01-31 16:02:05 +01:00
..
imx8mn_beacon.c imx: imx8mm/imx8mn_beacon: Remove redundant code 2022-04-12 15:36:17 +02:00
imximage-8mn-lpddr4.cfg imx: Don't define __ASSEMBLY__ in source files 2022-02-08 23:07:58 -05:00
Kconfig nxp: Make board/freescale/common/Kconfig safe to include once in arch/Kconfig 2022-07-05 17:03:02 -04:00
lpddr4_2g_timing.c imx: Add 2GB lpddr support for i.MX8MN Beacon EmbeddedWorks devkit. 2021-03-01 10:21:36 +01:00
lpddr4_timing.c WS cleanup: remove trailing empty lines 2021-09-30 08:08:56 -04:00
MAINTAINERS imx: Add 2GB lpddr support for i.MX8MN Beacon EmbeddedWorks devkit. 2021-03-01 10:21:36 +01:00
Makefile imx: Add 2GB lpddr support for i.MX8MN Beacon EmbeddedWorks devkit. 2021-03-01 10:21:36 +01:00
README imx: Suggest the NXP ATF github repo 2023-01-31 16:02:05 +01:00
spl.c imx: imx8mn-beacon: Fix out of spec voltage 2022-11-07 22:45:04 +01:00

U-Boot for the Beacon EmbeddedWorks i.MX8M Nano Devkit

Quick Start
===========
- Build the ARM Trusted firmware binary
- Get ddr firmware
- Build U-Boot
- Boot

Get and Build the ARM Trusted firmware
======================================
Note: $(srctree) is U-Boot source directory

$ git clone https://github.com/nxp-imx/imx-atf
$ git lf-5.10.72-2.2.0
$ make PLAT=imx8mn bl31 CROSS_COMPILE=aarch64-linux-gnu-
$ cp build/imx8mn/release/bl31.bin $(srctree)

Get the DDR firmware
====================
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
$ chmod +x firmware-imx-8.9.bin
$ ./firmware-imx-8.9
$ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree)

Build U-Boot
============
$ make imx8mn_beacon_defconfig
$ make CROSS_COMPILE=aarch64-linux-gnu-

Burn U-Boot to microSD Card
===========================
$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32

Boot
====
Set baseboard DIP switch:
S17: 1100XXXX