Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-30 00:21:06 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers
History
Callum Sinclair 223c44904d rtc: ds1307: Fix incorrect clock reset for DS13xx 
The ds1307 driver also supports the DS1339 and DS1340.
However, in ds1307_rtc_reset the register writes assume that the chip
is a DS1307. This is evident in the writing of bits SQWE, RS1, RS0 to
the control register. While this applies correctly to the DS1307, on a
DS1340 the control register doesn't contain those bits (instead, the
register is used for clock calibration). By writing these bits the
clock calibration will be changed and the chip can become
non-functional after a reset call.

Signed-off-by: Callum Sinclair <callum.sinclair@alliedtelesis.co.nz>
2021-09-01 19:25:37 -04:00
..
adc dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
ata arm: mvebu: sata_mv failed to identify HDDs during cold start 2021-08-11 08:42:26 +02:00
axi dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
bios_emulator pci: Drop DM_PCI check from bios_emul 2021-08-05 19:46:35 -04:00
block Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
bootcount bootcount: add a new driver with syscon as backend 2021-08-22 11:04:52 +02:00
bus
button dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
cache dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
clk drivers: clk: Add memory clock driver for Intel N5X device 2021-08-25 12:55:13 +08:00
core Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
cpu dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
crypto crypto: hash: Add software hash DM driver 2021-09-01 19:25:37 -04:00
ddr nxp: Migrate a number of DDR related symbols to Kconfig 2021-08-31 17:46:37 -04:00
demo
dfu Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
dma Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
fastboot Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
firmware psci: Do not define do_poweroff() if CONFIG_SYSRESET_CMD_POWEROFF is enabled 2021-07-26 09:18:45 +02:00
fpga
gpio Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
hwspinlock dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
i2c Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
input i8042: Do not abuse CONFIG namespace 2021-08-30 14:13:28 -04:00
led dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
mailbox dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
memory
misc Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to Kconfig 2021-08-30 14:10:06 -04:00
mmc Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
mtd Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
mux dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
net Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
nvme dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
pch dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
pci Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
pci_endpoint dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
phy Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
pinctrl pinctrl: Add pinctrl driver for imx8ulp 2021-08-09 14:46:51 +02:00
power Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
pwm dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
qe global: Convert simple_strtoul() with hex to hextoul() 2021-08-02 13:32:14 -04:00
ram Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
reboot-mode Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
remoteproc remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs 2021-07-15 17:56:04 +05:30
reset reset: zynqmp: Add reset controller for ZynqMP SoC 2021-08-06 09:32:03 +02:00
rng Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
rtc rtc: ds1307: Fix incorrect clock reset for DS13xx 2021-09-01 19:25:37 -04:00
scsi pci: scsi: pci: Drop DM_PCI check from scsi 2021-08-05 19:46:35 -04:00
serial Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
smem dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
soc soc: xilinx: versal: Add soc_xilinx_versal driver 2021-08-26 08:08:11 +02:00
sound dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
spi spi: altera_spi: Do not abuse CONFIG namespace 2021-08-30 14:13:28 -04:00
spmi dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
sysinfo sysinfo: rcar3: Add Renesas R-Car Gen3 sysinfo driver 2021-07-20 23:33:54 +02:00
sysreset
tee tee: optee: sync cache on pre-reloc OP-TEE invocation 2021-07-23 07:13:25 -04:00
thermal dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
timer x86: tsc: Rename X86_TSC_TIMER_EARLY_FREQ to X86_TSC_TIMER_FREQ 2021-08-02 15:11:40 +08:00
tpm sandbox: tpm: Support extending a PCR multiple times 2021-08-01 09:05:24 -06:00
ufs dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
usb Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
video Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
virtio dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
w1 Kconfig: Remove all default n/no options 2021-08-31 17:47:49 -04:00
w1-eeprom dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
watchdog watchdog: add gpio watchdog driver 2021-08-31 12:04:03 +02:00
xen dm: define LOG_CATEGORY for all uclass 2021-07-06 10:38:03 -06:00
Kconfig reboot-mode: add support for reboot mode control 2021-07-23 10:16:39 -04:00
Makefile ddr: Add DDR driver for iMX8ULP 2021-08-09 14:46:51 +02:00