u-boot/arch/arm/mach-rockchip/rk3288/rk3288.c
Kever Yang 25c6173099 rockchip: rk3288: move configure_l2ctlr back to rk3288
The configure_l2ctlr() is used only by rk3288, do not need to
locate in sys_proto.h

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00

59 lines
1.3 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2016 Rockchip Electronics Co., Ltd
*/
#include <asm/armv7.h>
#include <asm/io.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/grf_rk3288.h>
#define GRF_BASE 0xff770000
#ifdef CONFIG_SPL_BUILD
static void configure_l2ctlr(void)
{
u32 l2ctlr;
l2ctlr = read_l2ctlr();
l2ctlr &= 0xfffc0000; /* clear bit0~bit17 */
/*
* Data RAM write latency: 2 cycles
* Data RAM read latency: 2 cycles
* Data RAM setup latency: 1 cycle
* Tag RAM write latency: 1 cycle
* Tag RAM read latency: 1 cycle
* Tag RAM setup latency: 1 cycle
*/
l2ctlr |= (1 << 3 | 1 << 0);
write_l2ctlr(l2ctlr);
}
#endif
int arch_cpu_init(void)
{
#ifdef CONFIG_SPL_BUILD
configure_l2ctlr();
#else
/* We do some SoC one time setting here. */
struct rk3288_grf * const grf = (void *)GRF_BASE;
/* Use rkpwm by default */
rk_setreg(&grf->soc_con2, 1 << 0);
#endif
return 0;
}
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
/* Enable early UART on the RK3288 */
struct rk3288_grf * const grf = (void *)GRF_BASE;
rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT |
GPIO7C6_MASK << GPIO7C6_SHIFT,
GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT |
GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT);
}
#endif